Drum Pump×アクアシステム - メーカー・企業と製品の一覧

Drum Pumpの製品一覧

16~23 件を表示 / 全 23 件

表示件数

Air motor type chemical drum pump CHD-20APP (V/N)

[For Solvents / Ball Valve with Gun Nozzle] For transferring alkaline solvents in areas where open flames are prohibited! An air-operated chemical drum pump designed with a focus on reasonable pricing.

**CHD Series** CHD-20APP (For Solvents) CHD-20APPV (For Solvents / with Ball Valve) CHD-20APPN (For Solvents / with Gun Nozzle) **Benefits** ● Continuous operation possible ● Lightweight and compact body ● Inexpensive ● Safe division of flammable liquids ● Motor part can be replaced **Features** ● Complies with PSE (Product Safety of Electrical Appliances and Materials) for peace of mind and safety ● Designed specifically for JIS standard 200L closed drums (large cap G2) ● For low viscosity solvents (below 100cP) ● No risk of electric leakage due to air operation ● Air motor type with high discharge volume and no pulsation ● Discharge only **Replacement of Motor Head** The head part (motor part) can be easily detached and replaced, allowing the air motor type to be switched to an electric type. 1. Remove the four screws connecting the motor and pipe (pump part) with a screwdriver. 2. Reassemble in the same manner to complete the replacement.

  • pump

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

Air piston drum pump "PST-20G"

A pump suitable for transferring liquids with a viscosity of 20,000 cP or less! A high-lift pump with a discharge height of 50m (equivalent to ISO 1,000).

◎Explosion-proof design that does not use electricity ◎Compatible with high-viscosity liquids ◎Can be used without sealing the drum ◎Powerful discharge 《Benefits》 ●Efficient transfer of high-viscosity liquids ●Safe transfer of flammable liquids ●Ideal for horizontal and high-lift transfer ●Continuous operation possible 《Features》 ●Dedicated to JIS standard 200L closed drums (large plug G2) ●Maximum lifting capacity of 50m ●Piston-type pump (with pulsation)

  • pump

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

Air piston drum pump "PST-20SUS"

A pump suitable for transferring liquids with a viscosity of 20,000 cP or less! A high-lift pump with a discharge height of 50m (equivalent to ISO 1,000).

◎Explosion-proof design that does not use electricity ◎Compatible with high-viscosity liquids ◎Can be used without sealing the drum ◎Powerful discharge 《Benefits》 ●Efficient transfer of high-viscosity liquids ●Safe transfer of flammable liquids ●Ideal for horizontal and high-lift transfer ●Continuous operation possible 《Features》 ●Dedicated to JIS standard 200L closed drums (large plug G2) ●Maximum lift capacity of 50m ●Piston-type pump (with pulsation)

  • pump

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

Electric Drum Pump EVD-100/200/12/100H

An electric drum pump that is relatively high viscosity oil for electric types, ideal for transporting to high places.

**EVD Series** EVD-100 (For Oil / 100V) EVD-200 (For Oil / 200V) EVD-12 (For Oil / 12V) EVD-100H (For Oil / 100V) *Not suitable for kerosene, light oil, solvents, etc.* ◎ Three types to suit your needs ◎ Compatible with high-viscosity liquids ◎ Customizable **Benefits** ● Capable of handling general oil VG400 and gear oil SAE140 at 15°C ● High discharge pressure of 0.45MPa allows for use at heights or over long distances ● Lever coupling type for easy one-touch attachment and detachment ● Options for flow meters and manual nozzles available for various applications ● EVD-100H is optimal for discharging large amounts of oil below 1,000 cP **Features** ● Designed specifically for JIS standard 200L closed drums (large cap G2) ● Power supply options include AC100V, 200V (single-phase), and DC12V ● Rated for 20 minutes *Please be careful as the motor may burn out and cause failure* ● Maximum lift height of 30m ● Also available in a drum can and hose connection type

  • pump

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

Electric Chemical Drum Pump CHD-20HP (V/N)

Pursuing reasonable prices! For the transfer of hydrogen peroxide (30% concentration) and nitric acid (30% concentration).

**CHD Series** CHD-20HP (For Solvents) CHD-20HPV (For Solvents / With Ball Valve) CHD-20HPN (For Solvents / With Gun Nozzle) **Advantages** ● Continuous operation possible ● Lightweight and compact body ● Inexpensive ● Motor part can be replaced **Features** ● Complies with PSE (Product Safety Electrical Appliance and Material) for safety and security ● Designed specifically for JIS standard 200L closed drums (large cap G2) ● For low viscosity solvents (below 100cP) ● For dispensing only **Replacing the Motor Head** The head part (motor part) can be easily detached and replaced, allowing for an air motor type to be switched to an electric type. 1. Remove the four screws connecting the motor and the pipe (pump part) with a screwdriver. 2. Reassemble in the same manner to complete the replacement. **Regarding Ball Valve and Gun Nozzle** ● Ball Valve (V) By installing a ball valve, valve opening and closing operations are possible during liquid dispensing. ● Gun Nozzle (N) Operable with one hand, allowing for opening and closing operations at hand, easy to install with just one screwdriver. *Note: Liquids that corrode stainless steel cannot be used (some SUS parts are inside the nozzle).*

  • pump

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

Integrated flow meter with auto-stop gun electric drum pump/TDP1

Essential for fuel-saving measures! Electric drum pump with full-stop function.

Measuring and stopping are standard! Cost reduction through usage management! 《TDP1 Series (for kerosene and light oil)》 TDP1K24-ATN (for kerosene and light oil / with main unit TB-K24-FM) TDP1-ATNK24 (for kerosene and light oil / with nozzle TB-K24-FM) TDP1M33-ATN (for kerosene and light oil / with main unit MK33-25D) TDP1-ATN (for kerosene and light oil) ◎ Integrated flow meter You can choose from three types with flow meters (TDP1K24-ATN, TDP1-ATNK24, TDP1M33-ATN) based on your application. There is also a type without a flow meter, allowing for economical use of kerosene drum pumps. ◎ Electric type with auto-stop gun preset for kerosene and light oil Automatically stops discharge when the liquid is full! Prevents overflow. ◎ Improvement in liquid management With a flow meter, you can see the flow rate at a glance, eliminating waste and leading to cost reduction. ◎ Continuous operation possible Can be used anywhere with continuous operation at 100V electric power, improving work efficiency.

  • pump

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

Sensor Drum Pump APD-20GATNB (Sensor)

Industry first! Medium viscosity oil can also be auto-stopped!

"Battery-operated sensor auto-stop nozzle air pressure pump" APD-20GATNB (for diesel, kerosene, and medium viscosity oil) <Description of the main unit> - Ideal for refueling and dispensing operations of kerosene, diesel, and medium viscosity oil. - The nozzle is equipped with a built-in sensor that automatically stops when it detects liquid. - The auto-stop function prevents spills that occur when transferring liquid to a container, helping to eliminate oil stains and odors, thus contributing to cost reduction and environmental improvement. - Operates on three AA lithium batteries, allowing for approximately 200 uses under normal conditions. *Please pay attention to the operating pressure and flow rate range.

  • pump

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

Sensor Drum Pump APD-20ATNB (Sensor)

Auto-stop gun nozzle specification compatible with medium viscosity oil!

"Battery-operated sensor auto-stop nozzle air pressure pump" APD-20ATNB (for diesel and kerosene) <Main Body Description> - Ideal for refueling and transferring operations of kerosene and diesel. - Equipped with a nozzle that has a built-in sensor that automatically stops when it detects liquid. - The auto-stop function prevents spills that occur when transferring liquid to a container, helping to eliminate oil stains and odors, thereby contributing to cost reduction and environmental improvement. - Operates on three AA lithium batteries, allowing for approximately 200 uses under normal conditions. *Please pay attention to the operating pressure and flow range.

  • pump

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録