tube - メーカー・企業142社の製品一覧とランキング | イプロス

更新日： 集計期間:Aug 12, 2026～Sep 08, 2026
※当サイトの各ページの閲覧回数を元に算出したランキングです。

tubeのメーカー・企業ランキング

更新日： 集計期間:Aug 12, 2026～Sep 08, 2026
※当サイトの各ページの閲覧回数を元に算出したランキングです。

  1. 未来工業 Gifu//Building materials, supplies and fixtures manufacturers
  2. アオイ Shizuoka//others
  3. グンゼ エンプラ事業部 Osaka//Building materials, supplies and fixtures manufacturers
  4. 4 中日技研工業 Aichi//others
  5. 4 神田ゴム化学 Tokyo//retail
企業ランキングへ

tubeの製品ランキング

更新日： 集計期間:Aug 12, 2026～Sep 08, 2026
※当サイトの各ページの閲覧回数を元に算出したランキングです。

  1. Future Industry Spiral Tube (Wire, Cable, Wiring Protection Material) 未来工業
  2. Future Industry Flame Retardant Mirarex F (Flame Retardant Type Corrugated Tube) 未来工業
  3. Insulating Tube "Flame Retardant Silicone Varnish Glass Tube" アスティックフクシマ 株式会社アスティックフクシマ大阪本社
  4. 4 Air Cooler Vortex Tube 虹技
  5. 4 Calorex (heat exchange tube) 神田ゴム化学

tubeの製品一覧

361～390 件を表示 ／ 全 565 件

表示件数
Fluororesin coating "Main products required"

Fluororesin coating "Main products required"

Introducing the main products that require fluororesin coatings and examples of applications by product!

Here are the main products that require fluororesin coating. 【Food Manufacturing】 ■Non-stick - Mochi: rollers, hoppers, screws, knives, etc. - Senbei: baking plates, scrapers, molds, etc. - Bread: baking sheets, bread cases, molds, etc. - Rice: rice cookers, stirring blades, hoppers, screws, etc. - Candy, caramel: shoots, molds, knives, plates, etc. *For more details, please refer to the external link page or feel free to contact us.

  • others
  • tube

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Fluororesin coating "recoating"

Fluororesin coating "recoating"

Re-coating is possible multiple times! We also introduce a peeling method that reduces the burden on the substrate.

Fluororesin coatings can be "re-coated" multiple times. When re-coating with fluororesin, it is necessary to first strip the current fluororesin coating. This is done using sandblasting, which inevitably takes a long time. Therefore, for plates under 1mm or precision parts, it is essential to choose a coating that will not affect the substrate even after stripping the fluororesin coating. At Daito Kasei, we also offer processing methods that do not burden the substrate during re-coating. 【Stripping Methods for Each Coating】 ■ Polyurethane Coating - Soak in solvent to strip → Sandblast ■ Ceramic Coating - Clean → Heat treatment → Sandblast ■ Polyethylene Coating - Heat until the surface softens, then strip → Heat treatment → Sandblast *For more details, please refer to the external link page or feel free to contact us.

  • others
  • tube

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Puncture Inspection Device for Poly Tube and Aluminum Laminated Tube

Puncture Inspection Device for Poly Tube and Aluminum Laminated Tube

A puncture inspection device that allows for quantitative testing using a load cell inspection unit!

The "Puncture Inspection Device" allows for quantitative inspection by monitoring the pressing pressure of the air cylinder with a load cell and setting management values. It operates in conjunction with the filling machine while ensuring continuous motion inspection time through servo drive. A smooth connection with the Norden tube filling machine enables reliable inline inspection of all items. The liquid collection tray, designed to ensure the machine's cleanliness during puncture occurrences, is removable. 【Features】 ■ Load cell type inspection unit ■ Continuous motion transport unit ■ Liquid collection tray and liquid detection sensor ■ Direct linkage with NORDEN tube filling machine ■ Ability to increase or decrease processing capacity by changing the head ■ Compatible with filling machines from any manufacturer (please consult us) *For more details, please refer to the catalog. Feel free to contact us with any inquiries.

  • others
  • tube

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Plastic Tube Clear Soft Nylon Tube CF Series

Plastic Tube Clear Soft Nylon Tube CF Series

Achieving zero plasticizer formulation.

Plastic tube that resolves issues such as tube thinning and hardening.

  • others
  • tube

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Plastic Tube U-Flex U-9500

Plastic Tube U-Flex U-9500

Achieving flexibility not found in conventional plastic tubes.

A urethane tube designed to easily handle piping in limited spaces and complex piping systems.

  • others
  • tube

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Plastic tube Soft urethane tube U-9200

Plastic tube Soft urethane tube U-9200

Using ether-based polyurethane

A plastic tube with excellent resistance to hydrolysis.

  • others
  • tube

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
eco-flex ecoh(hp-ls) series

eco-flex ecoh(hp-ls) series

High voltage resistance and UV resistance formulation grade

Plastic tube with high-performance light stabilizers, allowing outdoor use without a protective cover depending on conditions.

  • others
  • tube

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Control Tube PX/PF Series

Control Tube PX/PF Series

Optimal for signal piping such as instrumentation piping.

A coated nylon tube manufactured for the purpose of being used as a replacement for conventional control copper pipes.

  • others
  • tube

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Urethane Flat Tube UF Series

Urethane Flat Tube UF Series

Ideal for multi-core piping.

UF Series polyurethane flat tubes developed by Aoi Corporation.

  • others
  • tube

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Urethane Coil Tube UK Series

Urethane Coil Tube UK Series

Ideal for multi-core piping in movable parts.

UK Series urethane coil tube developed by Aoi Corporation.

  • others
  • tube

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Coiling Tube KX-1200

Coiling Tube KX-1200

Easy to install and smooth to extend.

A coiling tube with excellent durability for coil terminals.

  • others
  • tube

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Wear-resistant tube and wear-resistant flat tube ARU and ARUF series

Wear-resistant tube and wear-resistant flat tube ARU and ARUF series

[High wear resistance and slip performance] This is a urethane tube with excellent hydrolysis resistance, flexibility, and bending fatigue resistance.

The wear-resistant tube "ARU Series" has significantly improved wear resistance compared to conventional soft urethane tubes! Thanks to a unique special manufacturing method, the tube surface is finished with a pearlescent (matte) molding. There is less adhesion between the tubes, enhancing sliding performance and reducing friction resistance. The use of a special ether (PTMG) based polyurethane provides excellent hydrolysis resistance. Additionally, it boasts superior flexibility (hardness: Shore A90) and bending fatigue resistance, allowing for a smaller minimum bending radius compared to conventional products. This is a non-bleeding clean tube that improves wear resistance without the addition of lubricants. *For clean room specifications, please add -P80 to the model number. The wear-resistant flat tube "ARUF Series" has been processed into a multi-core flat design using a special welding method. [By flattening the ARU tube, multiple drive system piping can be organized while maintaining its excellent characteristics.] - There are no residues after peeling, allowing direct connection to fittings. - Color arrangements can be freely selected, making pipe identification easy. - Customization is available according to customer requests. [For more details, please download the catalog or feel free to contact us.]

  • others
  • tube

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Multi-layer fluoropolymer resin tube 'REF5 Series'

Multi-layer fluoropolymer resin tube 'REF5 Series'

Introducing multi-layer fluoropolymer tubes that meet various needs, using pure fluorine in the liquid contact layer!

The "REF5 Series" is a tube that achieves performance equivalent to fluoropolymer tubes while keeping costs down, and can be used for various applications without compromising flexibility. The outer layer made of nylon elastomer has high gas barrier properties, reducing bubble formation, and the inner layer made of FEP provides cleaning properties equivalent to single-layer fluoropolymer tubes. Additionally, it has high moisture barrier properties and can be used with fluids that react to moisture, and it is resistant to bending, wear, and scratches, making it suitable for piping in robots and other applications. 【Features】 ■ RoHS compliant ■ The inner layer is made of fluoropolymer, offering excellent chemical resistance ■ Semi-transparent, allowing for visibility of the fluid ■ Significantly improved cleaning properties of the inner surface ■ Good gas barrier properties and mobility *For more details, please refer to the PDF document or feel free to contact us.

  • others
  • tube

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Aoi's Biomass Tube [Contributing to Decarbonization Solutions]

Aoi's Biomass Tube [Contributing to Decarbonization Solutions]

Contributing to the decarbonization of production lines! Produced using plant-based raw materials as the main ingredient.

Our biomass tubes are used for piping fluids such as air, water, oil, and chemicals. In a manufacturing line where there are not many options for applicable tubes, we have achieved a high level of biomass conversion without compromising performance. From small components to achieving large SDGs goals. We appreciate your understanding of this sentiment, and we have received support from various customers. 【Product Lineup】 ■ Amido Flex ■ Super Flex ■ Biomass Urethane Tube ■ Multi-layer Fluorine Tube ■ Non-Halogen, Non-Phosphorus Flame Retardant Tube ■ Control Tube, Super Control Tube *For more details, please refer to the PDF document or feel free to contact us.

  • Piping materials (plastic pipes)
  • tube

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Biomass Tube Amido Flex

Biomass Tube Amido Flex

Meets the needs of the sustainable era! Plant-based main ingredient tube series.

We would like to introduce our biomass tube "AmidoFlex." The nylon tube manufactured by Aoi is produced using polyamide 11, which is made from the seeds of the castor bean as the main raw material. The negative pressure is -0.1MPa. Please feel free to contact us if you have any inquiries. 【Specifications】 ■ Material: Polyamide 11 ■ Operating temperature range ・ Air/Oil: -40℃ to +100℃ ・ Water: 0℃ to +80℃ (freezing not allowed) ■ Negative pressure: -0.1MPa *For more details, please refer to the PDF document or feel free to contact us.

  • Piping materials (plastic pipes)
  • tube

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Biomass Tube: Biomass Urethane Tube

Biomass Tube: Biomass Urethane Tube

You can choose the main materials such as nylon, urethane, and fluorine tubes according to your application!

We would like to introduce our "Biomass Urethane Tube." The material is biomass TPU, produced primarily from plant-based raw materials. The temperature range for use is -40℃ to +80℃ in air, and 0℃ to +60℃ in water. Please feel free to contact us if you have any inquiries. 【Specifications】 ■Material: Biomass TPU ■Temperature Range ・Air: -40℃ to +80℃ ・Water: 0℃ to +60℃ (freezing not allowed) ■Negative Pressure: -0.1MPa *For more details, please refer to the PDF document or feel free to contact us.

  • Piping materials (plastic pipes)
  • tube

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Biomass Tube Multi-layer Fluorine Tube

Biomass Tube Multi-layer Fluorine Tube

Food sanitation law compliant product! The material is nylon elastomer + fluororesin (FEP).

We would like to introduce our "Multi-layer Fluoropolymer Tube." The outer layer is made of soft nylon using biomass material (PA11). This tube series is made from plant-based primary materials that meet the needs of the sustainable era. Please feel free to contact us if you have any inquiries. 【Specifications】 ■ Material: Nylon elastomer + fluororesin (FEP) ■ Temperature range: -20°C to +60°C (not suitable for freezing) ■ Negative pressure: -0.1MPa *For more details, please refer to the PDF document or feel free to contact us.

  • Piping materials (plastic pipes)
  • tube

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Biomass Tube - Non-Halogen, Non-Phosphorus Flame Retardant Tube

Biomass Tube - Non-Halogen, Non-Phosphorus Flame Retardant Tube

Using biomass product Super Flex (F-1500) for the inner tube!

We would like to introduce our "Non-Halogen, Non-Phosphorus Flame Retardant Tube." The inner tube uses a biomass product called Super Flex (F-1500). The coating is made of non-halogen, non-phosphorus flame retardant resin. This is a made-to-order product, so please feel free to contact us if you have any requests. 【Specifications (partial)】 ■Material - Coating: Non-halogen, non-phosphorus flame retardant resin - Inner: Polyamide 11 ■Negative Pressure: -0.1MPa *For more details, please refer to the PDF document or feel free to contact us.

  • Piping materials (plastic pipes)
  • tube

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
【Free samples available!】 Low-temperature curing fluororesin coating

【Free samples available!】 Low-temperature curing fluororesin coating

[IPROS Exclusive Project] Fluororesin Coating for Plastic and Rubber!! FU-1000 Series.

The FU-1000 series of fluororesin coatings features excellent non-stick properties, lubricity, water repellency, and dirt resistance. It is a low-temperature curing fluororesin coating for plastics and rubber. For more details, please contact us or refer to the catalog. ＝＝＝＝＝＝＝≪Campaign Information≫＝＝＝＝＝＝＝＝＝ ◎Everyone who contacts us will receive a sample!◎ 【Conditions for Receiving the Gift】 Please fill in the following two points in the 'Inquiry Details' section at the bottom of the page when contacting us. ■Material to be coated ■Required properties *Please select from the options below. Take this opportunity to try it out! ＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝ 【Materials for Coating】 - Stainless steel - Aluminum - Iron - Rubber 【Required Properties】 - Corrosion resistance - Non-stick properties - Heat resistance - Low friction - Sliding properties - Insulation - Conductivity - Ion leaching prevention - Wear resistance - Water repellency - Antibacterial properties - ECO coating - Others *We will send a comprehensive catalog free of charge to those who request it.

  • Heating and cooling equipment and facilities
  • tube

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Fluororesin coating

Fluororesin coating

I recommend this when you want to give various materials a slippery and non-stick quality!

We offer a variety of options to meet requests such as wanting greater corrosion resistance and conductivity, depending on applications in the kitchen and industrial fields.

  • paint
  • tube

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Achieving slip and non-stick properties! "Daikin Industries' fluoropolymer coating"

Achieving slip and non-stick properties! "Daikin Industries' fluoropolymer coating"

We can accommodate various requests, such as wanting greater corrosion resistance and conductivity, depending on applications in the kitchen and industrial fields.

【Features】 ■ Non-stick ■ Slippery ■ Resistant to chemicals ■ Heat resistant The base materials that can be processed include metals such as aluminum, iron, and stainless steel. Please choose materials that can withstand a bonding temperature of 180°C to 380°C. *For more details, please contact us.

  • paint
  • tube

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Instrumentation Electric Heating Conduit - Tube Trace SEI Type/MEI Type HT

Instrumentation Electric Heating Conduit - Tube Trace SEI Type/MEI Type HT

A tube with electric heat tracing and insulation function that can withstand high temperatures up to 399℃.

The "Tube Trace SEI Type/MEI Type-HT" is a heated conduit for instrumentation used for sampling up to the pressure gauge and for impulse lines. It enables freeze prevention of the process tube even under conditions of -45°C and wind speeds of 40 kph. This product uses HPT heater cables and can be used up to 399°C even when powered. 【Features】 ■ Burn prevention jacket ■ Can be cut to the required length for quick installation ■ Rated continuous heat resistance temperature of 399°C ■ Outdoor temperature detection control at 5°C ■ Freeze prevention down to outdoor temperatures of -45°C *For more details, please refer to the PDF document or feel free to contact us.

  • others
  • tube

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Spaslit tube

Spaslit tube

By providing multiple slits, it creates a structure that is easy to bend, disperses stress, and is difficult to break!

We would like to introduce the "Spaslit Tube" handled by SG Industrial Co., Ltd. By simply pushing apart the cut section by hand, it is possible to store cables and wires. The structure is designed to be easy to bend and to distribute stress, making it less likely to break by incorporating multiple slits. We also have dedicated tools available, so please feel free to contact us. 【Specifications (Excerpt)】 ■Model Number: CTS-6 ■Dimensions (mm) - Inner Diameter: 6 - Maximum Bundling Range φmm: 8 - Wall Thickness (T): 0.8 - Pitch (P): 12 *For more details, please refer to the PDF document or feel free to contact us.

  • Safety and consumables
  • tube

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
[Example] Drip irrigation installation

[Example] Drip irrigation installation

Leave the installation of irrigation for planting to us! Here are examples of problem-solving through product implementation.

We would like to introduce the drip irrigation system we implemented. At the "Tsubaki Kasen" indoor camellia garden in Oita Prefecture, which opened about five years ago, the staff initially handled all watering manually, resulting in high labor costs and time consumption. To address this, we introduced "drip tubes" and the "automatic irrigation timer 7101." By managing irrigation with the timer, we achieved labor savings. The system allows for precise dripping in necessary locations, reducing water usage and lowering water costs. 【Case Study】 <Challenges> ■ Staff handled all watering manually from the beginning ■ High labor costs and time consumption <Solution> ■ Products introduced: Drip tubes, automatic irrigation timer 7101 ■ Labor savings achieved by managing irrigation with the timer ■ Use of drip tubes prevents water from evaporating in the air ■ Allows for precise dripping in necessary locations ■ Reduces water costs with lower water usage *For more details, please refer to the PDF document or feel free to contact us.

  • Building renovation system
  • tube

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Hottipolymer Ultra-Fine PEEK Tube

Hottipolymer Ultra-Fine PEEK Tube

Super engineering plastic tube with excellent heat resistance and chemical resistance.

PEEK (Polyether Ether Ketone) resin is a super engineering plastic with very excellent properties, but special techniques are required to mold stable tubes through extrusion. We sell standard sizes, but we can also accommodate custom requests. 【Features】 ■ Heat resistance: Continuous use is possible in a temperature environment of 260°C ■ Wear resistance: Exhibits outstanding wear resistance with a very low friction coefficient ■ Chemical resistance: Shows excellent resistance to various chemicals ■ Hydrolysis resistance: Demonstrates resistance to water and steam under high temperature and high pressure ■ Impact resistance: Exhibits high strength even in harsh environments ■ Flame retardancy: Has UL V-0 flame retardancy *For more details, please refer to the PDF document or feel free to contact us.

  • Subsidiary materials
  • Reinforcement and repair materials
  • others
  • tube

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Hottipolymer ultra-fine polyimide tube

Hottipolymer ultra-fine polyimide tube

Super engineering plastic tube with excellent heat resistance.

The "Ultra-Fine Polyimide Tube" is a tube extruded from polyimide resin (TPI) that has excellent heat resistance. Thermoplastic polyimide (TPI) excels in heat resistance, sliding properties, and environmental characteristics, with a glass transition temperature of approximately 250°C, which provides superior properties compared to other thermoplastic super engineering plastics. 【Features】 ■ Heat Resistance: Usable up to 240°C ■ Sliding Properties: Low dynamic friction coefficient and excellent wear resistance ■ Environmental Characteristics: Lower outgassing and metal impurities compared to other super engineering plastics, making it suitable for clean applications ■ Stability: Excellent plasma resistance, radiation resistance, and electrical properties *For more details, please refer to the PDF document or feel free to contact us.

  • Subsidiary materials
  • Reinforcement and repair materials
  • others
  • tube

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Hotti Polymer Ultra-Fine LM-ETFE Tube

Hotti Polymer Ultra-Fine LM-ETFE Tube

Fluororesin tube with excellent transparency and heat resistance.

LM-ETFE (ethylene-tetrafluoroethylene copolymer) resin is a thermoplastic fluoropolymer that possesses characteristics not found in conventional ETFE, such as low melting point and transparency. It has higher heat resistance than ETFE and can be used over a wide temperature range from -200 to 180°C. Additionally, compared to conventional ETFE, it excels in flexibility and mechanical strength, has high transparency from the visible to ultraviolet range, and features high surface smoothness, low wear, non-stick properties, and water and oil repellency, further enhancing its surface characteristics and reducing fluid resistance. It also exhibits excellent chemical resistance, electrical properties, and flame retardancy, allowing for the addition of characteristics that enhance the performance of conventional ETFE. *For more details, please refer to the PDF document or feel free to contact us.*

  • Subsidiary materials
  • Reinforcement and repair materials
  • others
  • tube

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Hottie Polymer Polybutadiene Tube

Hottie Polymer Polybutadiene Tube

Medical-grade PVC alternative tube

"Polybutadiene tube" is a lightweight, rubber-like tube that has non-slip properties. It has good gas permeability and transparency, and is an excellent flexible product. Due to its crystalline resin, it can reduce the adhesion of infusions to the inside of the tube compared to PVC tubes when used for infusion. Additionally, because it does not contain plasticizers, it is suitable for use in products for infants and pregnant women, and it is appropriate for medical use as it does not absorb APIs (active pharmaceutical ingredients). Furthermore, it complies with Ministry of Health, Labour and Welfare Notification No. 20 for food packaging applications. In terms of environmental impact, there are no harmful gases such as chlorine gas or nitrogen compounds generated when incinerated. *For more details, please refer to the PDF materials or feel free to contact us.*

  • Subsidiary materials
  • Reinforcement and repair materials
  • others
  • tube

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Tube "Polybutadiene Tube"

Tube "Polybutadiene Tube"

A medical-grade PVC alternative tube that combines the properties of plastic and rubber!

"Polybutadiene tube" is a thermoplastic elastomer tube that possesses the properties of both plastic and rubber. It is lightweight, rubber-like, and has non-slip properties, with good gas permeability, transparency, and excellent flexibility. Due to its crystalline resin, it can reduce the adhesion of infusions to the inside of the tube compared to PVC tubes when used for infusion. Additionally, since it does not contain plasticizers, it is suitable for use in products for infants and pregnant women, and it is appropriate for medical use as it does not absorb APIs (active pharmaceutical ingredients). 【Features】 ■ Excellent environmental properties ■ Good transparency ■ Compatibility for medical use ■ Flexibility *For more details, please refer to the catalog or feel free to contact us.

  • Subsidiary materials
  • Reinforcement and repair materials
  • others
  • tube

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Super Fine Super Engineering Plastic Tube Series

Super Fine Super Engineering Plastic Tube Series

Proposal based on various materials to meet your needs! Introduction of the Super Engineering Plastic Tube Series.

Our "Ultra-Fine Super Engineering Plastic Tube Series" offers a variety of materials based on your requirements. We have a lineup that includes super engineering plastics such as "PEEK," which excels in heat resistance and chemical resistance, as well as "TPI" and "PPS." The available sizes range from an outer diameter of approximately 0.3mm to 3.0mm. Please feel free to contact us as it varies depending on the wall thickness. 【Features (PEEK)】 ■ Usable in temperature environments up to 260°C ■ Exhibits outstanding wear resistance ■ Maintains high strength and toughness even in harsh environments ■ Demonstrates flame retardancy of UL V-O without the use of flame retardants *For more details, please refer to the PDF document or feel free to contact us.

  • others
  • tube

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

tubeに関連する検索キーワード

イプロス 関連サービス
COPYRIGHT © 2001-2026 IPROS CORPORATION ALL RIGHTS RESERVED.