Last Updated： Aggregation Period:Sep 17, 2025～Oct 14, 2025
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Sep 17, 2025～Oct 14, 2025
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Sep 17, 2025～Oct 14, 2025
This ranking is based on the number of page views on our site.
1246～1257 item / All 1257 items
High quality, metal case, built-in power supply.
-8-port PoE compatible - Metal case for good heat dissipation. - Uses a reliable built-in power supply.
Adoption of a key cylinder that is difficult to pick and a special key that is hard to duplicate.
Key switch with a special key cylinder It features a key cylinder that is difficult to pick and a special key that is hard to duplicate. Included keys: 3 keys per set Loop indicator and buzzer for abnormality confirmation Equipped with a loop indicator and buzzer that can confirm whether there are any abnormalities through loop input. It also has a spare lamp input, allowing for usage according to the system. Large contact type It has a non-voltage contact that can control output up to AC100V and 10A (resistive load), making it suitable for applications such as security lighting control and AC100V management ON/OFF switches. By supplying AC100V power, an indicator lamp that shows the ON/OFF status can be used. Wiring distance The wiring distance between the key switch main unit and our controller is as follows: ● Wire size used ● Wiring length 0.33mm² (φ0.65mm) Up to 500m 0.64mm² (φ0.9mm) Up to 900m 1.13mm² (φ1.2mm) Up to 1,500m *Please connect the contact output to the key switch input terminal of our controller.
Matt switch 500×700mm DMS-57
■Features ●Outer material: Special rubber ●Operating pressure: 200N/100cm² ●2-core lead ●Detection output: a contact AC/DC 30V 0.3A or less ●Lead wire length: 50cm ●Waterproof type ●Installation location: Indoor / semi-outdoor (places not directly exposed to rain)
Matt switch 700×1000mm DMS-710
■Features ●Outer material: Special rubber ●Operating pressure: 200N/100cm² ●2-core lead ●Detection output: a contact AC/DC 30V 0.3A or less ●Lead wire 50cm included ●Waterproof type ●Installation location: Indoor / semi-outdoor (places not directly exposed to rain)
It can be easily installed with a super compact controller and a detachable connection cable.
■Realization of compact controller This is a small controller with dimensions of W: 45mm H: 94mm D: 29mm, making it easy to install inside the door engine. ■Connection cables can be freely cut Depending on the installation conditions, both the light-emitting and light-receiving parts can have their connection cables freely cut. ●Cable length: 5m (for 6m DS-6N series, for 4m DS-4RN series) ●Cable length: 10m (for 10m DS-10N series) ■Slim sensor head can be installed with one touch The sensor head adopts a one-touch installation type that can be installed simply by pushing it into a pre-drilled hole (Φ12mm). Additionally, the diameter of the ring cover has been increased from the conventional 12mm to 15mm, improving workability. ■Equipped with sensitivity volume It features a sensitivity adjustment volume that can be adjusted to the optimal sensitivity according to the installation distance. ■User-friendly design ●High-reliability design that is hardly affected by external light disturbances such as sunlight ●Convenient operation indicator light for operation confirmation (Green LED: always on, turns off when detecting)
Adoption of a key cylinder that is difficult to pick and a special key that is hard to duplicate.
■ Key switch with a special key cylinder It features a key cylinder that is difficult to pick and a special key that is hard to duplicate. Included keys: 6 keys per set. ■ Key switch adopting a 3-way method convenient for remote operation It employs a 3-way method that allows for setting/resetting the alarm from both the key switch side and the controller side, making remote operation convenient. ■ Loop indicator light and buzzer for checking the presence of abnormalities Equipped with a loop indicator light and buzzer that can confirm whether there are any abnormalities through loop input. It also has a spare light input, allowing for use according to the system. ■ Wiring distance capability The wiring distance between the key switch main unit and our controller is as follows: ● Wire size used ● Wiring length 0.33mm² (φ0.65mm) Up to 500m 0.64mm² (φ0.9mm) Up to 900m 1.13mm² (φ1.2mm) Up to 1,500m ■ Tamper function to counteract vandalism and destruction It has a tamper function that emits an alarm signal when someone attempts to remove the main unit, providing peace of mind against vandalism and destruction.
A control unit integrated keypad switch with 2 outputs that corresponds to a PIN code, capable of setting 4 operation modes.
■Dual System Output It has a built-in dual system output and operates by verifying individual PIN codes, allowing a single unit to perform two types of control, such as setting/resetting mechanical security and opening/closing electric locks. ● Output 1: Output mode can be set ● Output 2: One-shot output ■ Four Output Modes Depending on the connected devices, four types of output modes can be set. ○ Latch Mode A mode where the contacts reverse with each PIN code verification. ○ One-shot Mode A mode that outputs contacts for approximately one second during PIN code verification. ○ Key Switch Mode A mode for remotely operating our controller. ○ Simultaneous Dual Output Mode A mode where both outputs are activated simultaneously during PIN code verification. In cases where unlocking is requested under duress, it will activate the unlocking output while also sending an alarm to the security panel, etc. * When using in Key Switch Mode, please set the remote switch LED setting on the controller side to "light up when unlocked." Alarm Buzzer If an incorrect PIN code is entered four times in a row, the built-in buzzer will sound, deterring tampering or unauthorized intruders.
Global Market for Emergency Stop Switches 2022-2031: Industry Analysis, Size, Share, Growth, Trends, Forecast
Transparency Market Research's market research report projects that the global emergency stop switch market, which was valued at $1.7 billion in 2022, will reach $3.1 billion by 2031, growing at an average annual rate of 6.4% during the forecast period. This report examines the global market for emergency stop switches and includes sections on introduction, assumptions, research methodology, executive summary, market overview, analysis by type (pull release, turn release, key release), analysis by application (CNC machines, elevators, medical testing equipment, machinery and equipment, others), analysis by industry (commercial, industrial), analysis by distribution channel (offline, online), regional analysis (North America, Europe, Asia-Pacific, Middle East & Africa, South America), competitive landscape, and key findings.
No setup required! DALI switch ready to use Minimum configuration (1) DALI BUS (2) DALI-2 switch 3 (3) DALI-2 lighting fixture
Multi-Master DALI-2 Built-in Application Controller 【Features】 ■ Smooth dimming and color adjustment from 0.1% easily! ■ Master RAPIX modular switch connects to the DALI signal line. Slave RAPIX switch connects to the master. ■ DALI current consumption 4mA ■ Configurable white LED IEC 62386–332 (Feedback) ■ Various settings possible with the built-in application controller for On/Off/Dimming, color adjustment, RGB/Timer start/stop/ Scene recall/Continuous playback of multiple scenes, etc. ■ Built-in memory in the controller 8 zones/8 scenes/2 flags/8 User Memory/8 Timer ■ Settings can be made using DALI-2 software or RAPIX software ■ DALI-2 certified, multi-master. Certified in accordance with IEC 62386-101 (System Components) IEC 62386–103 (Input Devices) IEC 62386–301 (Push-button) IEC 62386–302 (Digital/Analogue Input) IEC 62386–332 (Feedback)
