Last Updated： Aggregation Period:Jul 30, 2025～Aug 26, 2025
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Jul 30, 2025～Aug 26, 2025
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Jul 30, 2025～Aug 26, 2025
This ranking is based on the number of page views on our site.
931～945 item / All 1151 items
警戒のセット・解除が制御できる 磁気カード式のリモートスイッチ
■特定のセンサーだけを部分的にセット・解除可能 CSW-530-2はカードスイッチ側から特定のセンサーだけを部分的にセット・解除できます。また、リモートスイッチ側からコントローラの警戒のセット/リセットが可能です。(2路用リモートスイッチ) ■防滴構造 軒下など直接雨水がかからない半屋外に設置可能です。また、露出設置時にはオプションの防滴底ケース(CSB-515)を用いれば完璧です。 ■システム破壊やいたずらにも安心できるタンパー機能 本体を取り外そうとするとアラーム信号を発するタンパー機能が付いていますので、破壊やいたずらにも安心です。 ■インターロック機構 カバーは専用カードでないと開けられないインターロック機構を採用し、内部を保護しています。 ■抜群のマスター収容能力 カードのマスター収容能力は抜群で、一枚のカードで40億通りもの個別キーをマスターすることができます。
Adoption of a key cylinder that is difficult to pick and a special key that is hard to duplicate.
■ Key switch with a special key cylinder It features a key cylinder that is difficult to pick and a special key that is hard to duplicate. Included keys: 6 keys per set. ■ Key switch adopting a 3-way method convenient for remote operation It employs a 3-way method that allows for setting/resetting the alarm from both the key switch side and the controller side, making remote operation convenient. ■ Loop indicator light and buzzer for checking the presence of abnormalities Equipped with a loop indicator light and buzzer that can confirm whether there are any abnormalities through loop input. It also has a spare light input, allowing for use according to the system. ■ Wiring distance capability The wiring distance between the key switch main unit and our controller is as follows: ● Wire size used ● Wiring length 0.33mm² (φ0.65mm) Up to 500m 0.64mm² (φ0.9mm) Up to 900m 1.13mm² (φ1.2mm) Up to 1,500m ■ Tamper function to counteract vandalism and destruction It has a tamper function that emits an alarm signal when someone attempts to remove the main unit, providing peace of mind against vandalism and destruction.
A control unit integrated keypad switch with 2 outputs that corresponds to a PIN code, capable of setting 4 operation modes.
■Dual System Output It has a built-in dual system output and operates by verifying individual PIN codes, allowing a single unit to perform two types of control, such as setting/resetting mechanical security and opening/closing electric locks. ● Output 1: Output mode can be set ● Output 2: One-shot output ■ Four Output Modes Depending on the connected devices, four types of output modes can be set. ○ Latch Mode A mode where the contacts reverse with each PIN code verification. ○ One-shot Mode A mode that outputs contacts for approximately one second during PIN code verification. ○ Key Switch Mode A mode for remotely operating our controller. ○ Simultaneous Dual Output Mode A mode where both outputs are activated simultaneously during PIN code verification. In cases where unlocking is requested under duress, it will activate the unlocking output while also sending an alarm to the security panel, etc. * When using in Key Switch Mode, please set the remote switch LED setting on the controller side to "light up when unlocked." Alarm Buzzer If an incorrect PIN code is entered four times in a row, the built-in buzzer will sound, deterring tampering or unauthorized intruders.
No large-scale construction required! A non-contact, remote switch that contributes to energy management.
The "Smart Lighting Switch" is a non-contact, remote switch that can be built by simply replacing your existing switch while keeping your current lighting fixtures as they are. It can be combined with various IoT devices such as stamping machines. For conference rooms, it allows for flexible linking and separation between switches for both connected and individual use, and it can group and operate different buildings in factories as well. You can operate it remotely using your smartphone, tablet, or computer. Please feel free to consult us if you have any requests. 【Features】 ■ Non-contact & remote switch ■ Energy management originating from "Hayabusa" ■ Manual shared switches can remain ■ Linking/unlinking is completely flexible ■ Can be customized with your favorite patterns using stickers *For more details, please download the PDF or feel free to contact us.
We use CR material with a hardness of 40! Introducing the automotive door switch.
We would like to introduce our "Door Switch" that we handle. The material used is CR (for door switches) with a hardness of 40. It has average properties such as weather resistance, ozone resistance, heat resistance, and chemical resistance, making it suitable for general industrial products. Our company offers high-quality rubber products with advanced technology. Please feel free to contact us when you need assistance. 【Specifications】 ■ Material used: CR (for door switches) ■ Hardness: 40 *For more details, please refer to the PDF document or feel free to contact us.
Detectable even in substances other than fingers! A sensor switch with fewer malfunctions compared to other methods.
The "CT1000_SW_M_4755A" is a sensor switch equipped with a capacitive non-contact sensor LSI. It has directional sensitivity, limiting sensitivity to lateral approaches. The operating distance is restricted to a pre-set range of 0 to several centimeters, resulting in fewer malfunctions compared to other methods. It allows for the installation of transparent or opaque custom font panels on the sensing surface within a wide sensing area. 【Features】 ■ Fewer malfunctions compared to other methods ■ Sensitivity can be limited ■ Wide sensing area ■ Not dependent on skin color or optical & mechanical reflectivity ■ Capable of detecting substances other than fingers *For more details, please refer to the PDF document or feel free to contact us.
Improvement of accuracy and reproducibility! An ideal sensor to replace mechanical vibration switches.
The "5477B" is a vibration switch equipped with reliability as a two-wire connection and solid-state device. By separating the initial start-up and monitoring delays, it prevents unnecessary control. It features an all-weather, explosion-proof aluminum housing with a removable vibration electronic module built inside. 【Features】 ■ Speed measurement compatible with acceleration ■ Single contact ■ Separation of start-up and monitoring trip delays ■ Adjustable external contact ■ LCD display available (optional) *For more details, please refer to the PDF document or feel free to contact us.
Reduction of spare parts and complexity of operation! Equipped with dust resistance, moisture resistance, and rust prevention.
The "PRO" series has almost the same functionality, differing only in the shape of the housing and the size of the connections for the vibration switches. It includes three models: "PRO440," "PRO450," and "PRO6000." They can be installed on or near equipment in general industrial plant explosion-proof areas or under environmental conditions. 【Features】 ■ Designed to be mounted in a position that is easy to see and operate ■ Equipped with dust-proof, moisture-proof, and rust-proof features ■ Compatible with signals from converters for vibration, shock, temperature, water level, and flow rate ■ Vibration switches support upper limit alarm settings *For more details, please refer to the PDF materials or feel free to contact us.
Advanced security and IT management features! Enables real-time deterministic network operations.
The IDS-710 is a 10-port managed Ethernet switch. It operates in industrial environments and provides high performance. It enables real-time deterministic network operations. Using eight 10/100/1000-Base-T Ethernet ports, it can network gigabit and fast Ethernet devices. Two SFP slots support 10/100/1000 over copper or 1G/2.5G over fiber, and this flexibility allows for easy adaptation to network growth and changes. 【Features】 ■ Simple deployment ■ Secure ■ Rugged design for harsh environments ■ Reliable operation *For more details, please feel free to contact us.
Supports a comprehensive set of management features! Additionally, the switch can be managed with an IPv6 address.
The "IDS-509-SFP" is a 9-port managed Ethernet switch that operates in industrial environments, providing advanced performance and enabling real-time deterministic network operations. To meet environmental needs, you can choose any combination of 10/100/1000-Base-T Ethernet copper ports and 100/1000Base-X SFP fiber ports. The SFP slots allow for flexible network configurations using SFP transceivers provided by Perle, Cisco, or other MSA-compliant manufacturers, making it easier to utilize fiber in environments such as industrial plants where high levels of electromagnetic interference are common. 【Features】 ■ Simple deployment ■ Secure ■ Support for industrial Ethernet protocols ■ Rugged design for harsh environments ■ Reliable operation *For more details, please feel free to contact us.
Provides excellent reliability at -10 to 60℃! Managed industrial PoE+ switch with gigabit fiber.
The IDS-509GPP is a 9-port managed PoE+ switch. It operates in industrial environments and provides high performance, enabling real-time deterministic network operations. It supports a comprehensive set of management features, including MRP (IEC62439-2), PROFINET, Modbus TCP, and managed VLANs, and the switch can be managed with IPv6 addresses. 【Features】 ■ Simple deployment ■ PD power reset ■ Safe ■ Rugged design for harsh environments ■ Reliable operation *For more details, please feel free to contact us.
No setup is required; it works immediately when powered on! Industrial Gigabit PoE switch.
The "IDS-105GPP" is an industrial gigabit Ethernet switch with 5 to 7 ports. It provides advanced performance that enables real-time deterministic network operations. No configuration is required; it operates immediately upon power-up. It is reinforced to provide excellent reliability in harsh extended operating temperatures of 0 to 60°C or -40 to 75°C, and there are various models available with five copper ports, five copper ports and one fiber port, or five copper ports and two fiber ports. 【Features】 ■ Rugged design for harsh environments ■ Reliable operation ■ PoE and PoE+ (4 ports) ■ Jumbo frame support ■ Energy Efficient Ethernet (EEE) *For more details, please feel free to contact us.
Global Market for Emergency Stop Switches 2022-2031: Industry Analysis, Size, Share, Growth, Trends, Forecast
Transparency Market Research's market research report projects that the global emergency stop switch market, which was valued at $1.7 billion in 2022, will reach $3.1 billion by 2031, growing at an average annual rate of 6.4% during the forecast period. This report examines the global market for emergency stop switches and includes sections on introduction, assumptions, research methodology, executive summary, market overview, analysis by type (pull release, turn release, key release), analysis by application (CNC machines, elevators, medical testing equipment, machinery and equipment, others), analysis by industry (commercial, industrial), analysis by distribution channel (offline, online), regional analysis (North America, Europe, Asia-Pacific, Middle East & Africa, South America), competitive landscape, and key findings.
Global Market for Enterprise Network Equipment (2023-2028): Switches, Routers, WLAN, Network Security, and Others
Mordor Intelligence's report predicts that the global enterprise network equipment market will grow at a CAGR of 7.85% during the forecast period. This report provides a multifaceted analysis of the global enterprise network equipment market, including an introduction, research methodology, executive summary, market trends, analysis by type (switches, routers, WLAN, network security, and others), analysis by region (North America, Europe, Asia-Pacific, the United States, Canada, the United Kingdom, Germany, France, China, India, Japan), competitive landscape, market opportunities, and future trends.
World Market for Data Center Switches (2023-2028): Core Switches, Distribution Switches, Access Switches
According to the research report by Mordor Intelligence, the global data center switch market size, which was $14.4 billion in 2021, is projected to reach $19.8 billion by 2027, growing at a CAGR of 5.4% during the forecast period (2022-2027). This report provides a multifaceted analysis of the global data center switch market, including an introduction, research methodology, executive summary, market trends, analysis by switch type (core switches, distribution switches, access switches), regional analysis (North America, Europe, Asia-Pacific, United States, Canada, United Kingdom, Germany, France, China, Japan, India, South Korea), competitive landscape, market opportunities, and future trends.
