Last Updated： Aggregation Period:Oct 08, 2025～Nov 04, 2025
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Oct 08, 2025～Nov 04, 2025
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Oct 08, 2025～Nov 04, 2025
This ranking is based on the number of page views on our site.
526～540 item / All 1259 items
Matt switch 500×600mm DMS-56
■Features ●Outer material: Special rubber ●Operating pressure: 200N/100cm² ●2-core lead ●Detection output: a contact AC/DC 30V 0.3A or less ●Lead wire 50cm included ●Waterproof type ●Installation location: Indoor / semi-outdoor (places not directly exposed to rain)
The text in the room appears large and in green. Brightness is adjustable.
■Main Features ● When the switch is pressed, the occupancy lamp lights up, and it outputs 2 contact points accordingly. Pressing it again turns it off and reverses the 2 contact point output. It can be incorporated into a living safety notification system for use. ● Brightness can be switched between 2 levels. ● Original design with a color that is easy for elderly individuals with glaucoma to see (when lit). ● You can freely write on the nameplate (e.g., "Lights on when occupied," "Press," etc.). ● Suitable for a single switch box.
A human detection switch that performs direction detection for the human body and vehicles. The industry's first one-body type. Can be installed indoors and outdoors!
■ One-body type direction detection switch Unlike existing direction detection systems, this is a one-body type that performs direction detection and output operation with a single unit. It enables direction detection with one unit through two detection zones. ■ Capable of detecting pedestrians and slow-moving vehicles It can detect pedestrians and slow-moving vehicles, making it suitable for the following applications: ● Access control at entrances and exits ● Gate management for parking lots and various facilities ● Security and safety at construction sites ● Notification for restricted areas *Note: Detection may not occur for certain vehicles. ■ Activation switch for lighting, rotating lights, and alarms With a high-capacity contact output, it can be used as an activation switch for lighting, rotating lights, alarms, or cameras. ■ All-weather switch With a rainproof structure, it can be installed not only indoors but also outdoors and semi-outdoors. Additionally, it can be mounted on ceilings, walls, poles, etc., allowing for flexible installation locations. ■ User-friendly design ● The output operation time can be adjusted between approximately 5 seconds and approximately 5 minutes. ● The detection direction can be switched using the switch.
This is an infrared beam switch with a pressure-resistant explosion-proof structure that can be used in hazardous locations of Class 1 and Class 2.
■High explosion-proof performance It can be used in places handling hazardous materials such as chemical plants, filling machine manufacturers, and explosives factories. ■Adoption of a robust aluminum case This is a newly designed aluminum case tailored to the product. Additionally, it complies with waterproof grade IP65. ■High-performance specifications The power supply voltage can accommodate AC/DC 24-240V. The output is c contact at AC250V・1A/DC30V・1A (resistive load), with a detection range of up to 30m for long-distance detection. ■Operation indication The sensor's operation indication can be confirmed from the front. Receiver: Power indicator light - red; Unstable indicator light - green Emitter: Power indicator light - red ■Cable gland compliant with 2008 guidelines We use a pressure-resistant explosion-proof structure packing type cable gland for cable wiring work, making installation, maintenance, and repairs easier compared to conventional metal conduit wiring. ■Sealed interior The structure is highly airtight and manufactured in a specified indoor environment, ensuring that the interior does not fog up.
It can be easily installed with a super compact controller and a detachable connection cable.
■Realization of compact controller It is a small controller with dimensions of W: 45mm H: 94mm D: 29mm, making it easy to install inside the door engine. ■Connection cables can be freely cut Depending on the installation conditions, both the light-emitting and light-receiving parts can have their connection cables freely cut. ● Cable length: 5m (for 6m DS-6N series, for 4m DS-4RN series) ● Cable length: 10m (for 10m DS-10N series) ■Slim sensor head can be installed with one touch The sensor head adopts a one-touch installation type that can be installed simply by pushing it into a pre-drilled hole (Φ12mm). Moreover, the diameter of the ring cover has been increased from the conventional 12mm to 15mm, improving workability. ■Built-in sensitivity volume It has a built-in sensitivity adjustment volume that can be adjusted to the optimal sensitivity according to the installation distance. ■User-friendly design ● High-reliability design that is hardly affected by external light disturbances such as sunlight ● Convenient operation indicator light for operation confirmation (Green LED: always on, turns off when detecting)
The controller section has been miniaturized. The wire can be freely cut, and installation is easy with connector wiring.
■Two Power Sources for Different Uses You can choose between two types of power sources, 100V and 200V, depending on the installation conditions of the electric shutter. It is compatible with all types of electric shutters using a near-infrared one-beam opposing type. ■Connection Cables Can Be Cut Freely Depending on the installation conditions, both the emitter and receiver can have their connection cables cut freely. Additionally, the connection cables are joined by connectors, making wiring easier. ■Response Speed Switching Function In addition to normal real-time operation, it is also possible to switch to an on-delay timer operation (a function that prevents light-blocking operation by the edge of the electric shutter). ■Slim Sensor Head Can Be Installed with One Touch The sensor head for 10m detection adopts a one-touch installation type that can be installed simply by drilling a hole and pushing it in, improving workability. ■Built-in Sensitivity Volume It has a built-in sensitivity adjustment volume that can be adjusted to the optimal sensitivity according to the installation distance. ■User-Friendly Design ● High-reliability design that is hardly affected by external light disturbances such as sunlight ● Equipped with an operation indicator light that is convenient for operation confirmation (Red LED: Always on, turns off when detecting)
The controller unit has been miniaturized. The wire can be cut freely, and installation is easy with connector wiring.
■Two Power Sources for Different Uses You can choose between two types of power sources, 100V and 200V, depending on the installation conditions of the electric shutter. It is compatible with all types of electric shutters using a near-infrared one-beam opposing type. ■Connection Cables Can Be Cut Freely Depending on the installation conditions, both the light-emitting and light-receiving parts can have their connection cables cut freely. Additionally, the connection cables are joined by connectors, making wiring easier. ■Response Speed Switching Function In addition to normal real-time operation, it is also possible to switch to an on-delay timer operation (a function that prevents light-blocking operation by the edge of the electric shutter). ■Slim Sensor Head Can Be Installed with One Touch The sensor head for 10m detection adopts a one-touch installation type that can be installed simply by drilling a hole and pushing it in, improving workability. ■Built-in Sensitivity Volume It has a built-in sensitivity adjustment volume that can be adjusted to the optimal sensitivity according to the installation distance. ■User-Friendly Design ● High-reliability design that is hardly affected by external light disturbances such as sunlight ● Operation indicator light for convenient operation confirmation (Red LED: always on, turns off when detecting)
A sensor head with a built-in heater reduces malfunctions caused by condensation, freezing, and snow accumulation.
■Features ● Reduces malfunctions caused by "condensation or fogging in low-temperature warehouses or freezing warehouses" or "freezing or snow accumulation in cold regions." ● The sensor head is waterproof, allowing installation in places prone to condensation, such as low-temperature warehouses, freezing warehouses, or semi-outdoor areas. ● The design minimizes heat transfer from the heater to the sensor mounting plate. ● Detection distance of up to 10 meters. ● High-reliability design that is minimally affected by external light disturbances such as sunlight. ● Convenient operation indicator light for operation confirmation (green LED: always on, turns off during detection). ● With dimensions of W: 45mm H: 94mm D: 29mm, it is a compact controller that is easy to install inside door engines. ● The connection cables for both the light-emitting and light-receiving parts can be freely cut according to installation conditions. ● It has a built-in sensitivity adjustment volume that can be adjusted to the optimal sensitivity according to the installation distance.
Beam switch compatible with noren! You can freely adjust the angle of the beam.
■Operating Principle Pulsed modulated infrared light is continuously emitted from the light-emitting sensor, and the light-receiving sensor captures the weak infrared light that reflects off objects. The controller amplifies this input signal and performs synchronous detection to monitor the presence of reflective objects. ■Main Features ● The angle of the sensor body can be adjusted arbitrarily, allowing for a preferred reflection area. ● The door remains open while receiving reflected infrared light, ensuring safety. ● The light-emitting and light-receiving sensors are integrated, making wiring simple. ● It operates stably without being affected by external disturbances such as sunlight or lighting.
It's hygienic because you don't touch the switch directly! In addition to being adjustable to face forward and downward, the beam switch can also be adjusted left and right.
■Features ● It outputs a signal by waving your hand without touching the main unit, making it ideal for hygienic environments such as food and pharmaceutical factories and hospitals. ● The angle of the beam switch can be adjusted not only to face forward and downward but also to the left and right. ● The main unit is white, giving it a clean appearance, and the arrow mark clearly indicates where to wave your hand. ● The IP55 design ensures waterproof and dustproof construction. ● It can be installed on a single switch box (pitch 72.5–83.5mm). ■ Three patterns for the angle of the beam switch: front, downward, and left/right The position of the traditionally fixed beam switch can be changed. ■ White color enhances cleanliness The main unit is white, enhancing cleanliness and blending well in any environment. ■ The area to wave your hand is prominent The arrow mark makes it easy to identify where to wave your hand.
Non-contact switch, exposed type, PF-R1
■Features ● The door opens by waving your hand without touching the main unit, making it ideal for places where hygiene is a concern, such as food processing facilities and hospitals. ● Compatible with single-unit recessed switch boxes.
3D area stationary detection type safety switch for automatic doors
■Features ●This safety sensor is ideal for ensuring safety for circular doors, as it has a three-dimensional area. ●With initial settings, the microcontroller automatically assesses the surrounding environment and the sensor installation height to establish a stable area. ●Radio waves, wind, external noise, and temperature changes are all continuously controlled by the microcontroller for optimal operation. *Please note that it cannot be used as a security sensor or an automatic door activation sensor, as monitoring operation starts with an external activation input (voltage-free contact). *If there are uneven walls in the surrounding installation environment, reflections from the walls may occur, potentially reducing sensitivity.
Three-dimensional area stationary detection type safety switch for automatic doors.
■Features ● This safety sensor is ideal for ensuring safety around circular doors due to its three-dimensional area. ● The microcontroller automatically assesses the surrounding environment and the height at which the sensor is installed during initial setup, establishing a stable area. ● Radio waves, wind, and external noise are all automatically controlled by the microcontroller to eliminate false triggers. ● Temperature changes are also automatically corrected by the microcontroller, ensuring optimal operation at all times. * Please note that the monitoring operation starts with an external activation input (voltage-free contact), so it cannot be used as a security sensor or an automatic door activation sensor. * If there are uneven walls or similar features in the surrounding installation environment, reflections from the walls may occur, potentially reducing sensitivity, so please be cautious of the environment.
The automatic door sheet shutter is opened and closed with a rope switch. (Ideal for factory gates, etc.)
■Features ●Water-resistant type ●Cord length: 3m ●No-voltage relay contact (a contact) AC/DC 30V, 0.5A or less ●Installation location: Indoor / Semi-outdoor
![Wireless Remote Control Switch [2CH x 3 Point Type] DR-243R](https://image.www.ipros.com/public/product/image/00b/2000733845/IPROS90458525813683161390.jpeg?w=280&h=280)
Wireless Remote Control Switch [2CH x 3 Point Type] DR-243R
■2CH3 Point System The transmitter is a 2CH 3-point system. The transmitter allows you to select the display of "Open, Stop, Close" and "1, 2, 3" using the included sheet. By using them individually, control of up to 6 locations is possible. ■Reliable Reach Distance Maximum reach distance of approximately 40m with specific low power. ■Output Switching Function By changing the settings of the receiver, it can be switched between one-shot output and latch output. ■Number of Registrable Units The receiver can register up to 100 IDs. ■Easy Installation The receiver has a compact design and comes with an antenna with a 4m cable, allowing for flexible installation locations.
