soft×i CAD - List of Manufacturers, Suppliers, Companies and Products

soft Product List

31～45 item / All 56 items

Displayed results
[Case Study of 3D CAD Software for Mechanical Design] ShinMaywa Industries, Ltd.

[Case Study of 3D CAD Software for Mechanical Design] ShinMaywa Industries, Ltd.

[Free Case Study Available] Seamlessly Utilize 3D/2D! Aiming for a 30% Reduction in Development Time through Advanced Analysis

We would like to introduce a case study of the implementation of "iCAD SX" at ShinMaywa Industries, Ltd., which comprehensively covers the lifecycle of parking. Within multi-story parking structures, there are some designs that only require flat layout planning and arrangement, such as decks, rails, and columns. They were looking for a 3D CAD that could seamlessly utilize both 3D and 2D. After implementation, they successfully utilized analysis from the conceptual stage, optimized steel structural members, reduced rework during the prototype stage, and alleviated the workload for adjustment tasks at the assembly site. 【Case Overview】 ■ Reasons for Selection - Ease of assembly design - Drawing functions. Manufacturing drawings (2D drawings) are essential. - Ability to handle 3D/2D seamlessly in one file - Good support. The developer is domestic, allowing for quick responses and reliable support. ■ Implementation Effects - In new designs, they successfully reduced rework during the prototype stage by utilizing analysis. This enabled the downsizing of the motor for the lift through the lightweighting of pallets. - The effectiveness was also demonstrated in modification designs that required short-term construction. They could immediately renew designs by reading 2D drawings and engage with the client and DR. *For more details, please refer to the PDF document or feel free to contact us.

  • Drawing, tracing, CAD

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[Case Study of 3D CAD Software for Mechanical Design] Toshiba Electronic Engineering Co., Ltd.

[Case Study of 3D CAD Software for Mechanical Design] Toshiba Electronic Engineering Co., Ltd.

[Free Case Study] Conceptual design of electronic component manufacturing equipment accelerated by the use of 3D CAD!

We would like to introduce a case study of the implementation of "iCAD SX" at Toshiba Electronic Engineering Corporation's Equipment Technology Center. The company has chosen to apply high-end CAD to electronic components and mold design, utilizing 3D design only in areas where it is effective for equipment design, while adhering to 2D design where 2D data suffices. After the implementation, they were able to significantly speed up the conceptual design process of manufacturing equipment, drafting work after detailed design, and the creation of technical documents such as instruction manuals, which often involve design changes. [Case Overview] ■ Reasons for Adoption - Ability to apply 3D in conceptual design - Smooth handover of drawings to external partner companies responsible for manufacturing ■ Results - Easy-to-understand 3D images enhance communication with overseas manufacturers *For more details, please refer to the PDF document or feel free to contact us.

  • Drawing, tracing, CAD

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[Case Study of 3D CAD Software for Mechanical Design] Toyo Eitech Co., Ltd.

[Case Study of 3D CAD Software for Mechanical Design] Toyo Eitech Co., Ltd.

Free distribution of case studies: Promoting reform in the design process through the use of 3D CAD!

To Toyo Eitec Co., Ltd., a manufacturer of working machines, we would like to introduce a case study of the implementation of "iCAD SX." At the company, it was necessary to fundamentally reform and improve design quality to realize "technologies that can only be achieved by Toyo Eitec" with shorter delivery times and lower costs. After the introduction of the product, they have seen results in speeding up design, knowledge transfer, and enhancing proposal capabilities. 【Case Overview】 ■Challenges - 3D design is essential to meet the demand for shorter delivery times - High-end CAD systems have heavy data and are expensive ■Reasons for Adoption - Compatibility with the top-down design of our product - Short training period (usable in practical work within 3 days) - High system stability ■Results - Ability to utilize 3D models at client sites for presentations and specification decisions - Achieved consistent 3D top-down design from concept to detailed design - Enhanced young designers' skills through knowledge sharing using 3D *For more details, please refer to the PDF document or feel free to contact us.*

  • Drawing, tracing, CAD

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[Case Study of 3D CAD Software for Mechanical Design] Mimaki Engineering Co., Ltd.

[Case Study of 3D CAD Software for Mechanical Design] Mimaki Engineering Co., Ltd.

[Free Case Study Provided] A case where assembly support software accelerated production startup!

To Mimaki Engineering Co., Ltd., which maintains high performance, we would like to introduce a case study of the implementation of "iCAD SX." The company was exploring ways to shorten the processes from design to the construction of production equipment and mass production in order to extend their lead time and seize business opportunities ahead of competitors. After implementation, it became possible to share 3D data between the design department and production technology. Furthermore, by centralizing 3D data from design to production technology and manufacturing sites, the company is enhancing its competitiveness. 【Case Overview】 ■Challenges - Shortening the processes from design to the construction of production equipment and mass production ■Results - Smooth internal reviews due to high processing performance and good operability - Direct connection between the design department and production technology department through 3D data *For more details, please refer to the PDF document or feel free to contact us.

  • Drawing, tracing, CAD

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[Case Study of 3D CAD Software for Mechanical Design] Sumitomo Heavy Industries Environment

[Case Study of 3D CAD Software for Mechanical Design] Sumitomo Heavy Industries Environment

[Free Case Study Available] Smoothly convert existing 2D data to 3D, reducing design time by 22%!

We would like to introduce a case study on the implementation of "iCAD SX" at Sumitomo Heavy Industries Environment, a water treatment engineering company with top-class domestic market share. At the company, the core components are conceptualized and basic specifications are determined according to the required dimensions of the order drawings. After checking for interferences and optimizing the operator's workflow, partner manufacturers begin detailed design and manufacturing. "iCAD SX" was introduced to improve the accuracy and efficiency of this design work. After the implementation, the front-loading of design processes was achieved, resulting in a 22% reduction in design lead time. Although there was a problem with a decreasing number of veteran designers, the use of 3D CAD has made spatial design considerations easier, leading to an improvement in the skills of existing designers. [Case Overview] ■Challenges - There is a decreasing number of veteran designers who can create 2D drawings while envisioning 3D shapes. ■Results - Achieved a 22% reduction in design time. - Unique utilization of "synchronous motion" alleviated concerns during the delivery process. *For more details, please refer to the PDF document or feel free to contact us.

  • Drawing, tracing, CAD

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[Case Study of 3D CAD Software for Mechanical Design] AI Mecatech Co., Ltd.

[Case Study of 3D CAD Software for Mechanical Design] AI Mecatech Co., Ltd.

[Free Provision of Case Studies] Introduction, dissemination, and utilization of a 3D design environment that emphasizes the individuality and creativity of designers!

We would like to introduce a case study of the implementation of "iCAD SX" at AI Mecatech Co., Ltd., which produces high-precision manufacturing equipment such as flat panels. The company had been using 3D CAD since before 2006, but they found that the CAD data was heavy and the response was slow, making it difficult to use in practical operations. iCAD SX is a non-history CAD system without constraints, allowing for flexible creation and editing of 3D models, which suited the company’s needs for an interface that enables free expression of design ideas. 【Case Overview】 ■ Challenges - Heavy CAD data and slow response made practical use difficult. ■ Results - Faster response. - Flexibility to freely create and edit 3D models. - Ability to freely express design ideas. *For more details, please refer to the PDF document or feel free to contact us.

  • Drawing, tracing, CAD

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[Case Study of 3D CAD Software for Mechanical Design] Araki Manufacturing Co., Ltd.

[Case Study of 3D CAD Software for Mechanical Design] Araki Manufacturing Co., Ltd.

[Free Case Study Available] Applying 3D design to the increasingly complex work receiving section reduces design errors by 80%!

We would like to introduce a case study of the implementation of "iCAD SX" at Araki Manufacturing Co., Ltd., which is making strides in the development and manufacturing of various automatic transport devices and energy-saving devices. The company was struggling with an increase in design errors and interference omissions due to the complexity and size of the workpieces. As a result of the implementation, they successfully reduced design errors to one-fifth and achieved a 20% reduction in lead time. Additionally, they experienced ripple effects such as leveling the design workload and compacting the robot devices. 【Case Overview】 ■Challenges - Increasing design errors and interference omissions due to the complexity and size of workpieces ■Results - Reduced design errors to one-fifth and shortened lead time by 20% - Leveling of design workload and compacting of robot devices *For more details, please refer to the PDF document or feel free to contact us.

  • Drawing, tracing, CAD

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[Case Study of 3D CAD Software for Mechanical Design] Izumi Food Machinery Co., Ltd.

[Case Study of 3D CAD Software for Mechanical Design] Izumi Food Machinery Co., Ltd.

[Free Case Studies] Enhance product value through the challenge of 3D design tailored to your own design requirements!

We would like to introduce a case study of the implementation of "iCAD SX" at Izumi Food Machinery Co., Ltd., a manufacturer of various equipment for food and beverage production. The company has taken on the challenge of creating added value for its products in the increasingly competitive food manufacturing machinery market by working on 3D design, specifically tackling the difficult task of 3D designing the sterilization equipment, which is the heart of food manufacturing plants. With the introduction of this product, they were able to achieve effects that contribute to increased customer satisfaction, such as compacting the product and improving maintenance. [Case Overview] ■ Challenges - 3D design of the sterilization equipment, which is the heart of food manufacturing plants ■ Results - Product compactness - Improved maintenance *For more details, please refer to the PDF document or feel free to contact us.

  • Drawing, tracing, CAD

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[Case Study of 3D CAD Software for Mechanical Design] Toyama Co., Ltd.

[Case Study of 3D CAD Software for Mechanical Design] Toyama Co., Ltd.

[Free Case Study Provided] Promoting design efficiency by thoroughly integrating 3D CAD into the design environment through detailed in-house training!

We would like to introduce a case study of the implementation of "iCAD SX" at Toyama Co., Ltd., a manufacturer of experimental equipment used in research and development. At the company, designing complex mechanisms that cannot be handled by 2D CAD was necessary to achieve the compactization of products that were in high demand. Initially, the introduction of 3D CAD did not penetrate well on-site, but by closely understanding the proficiency levels of individuals and implementing in-house training that also focused on maintaining motivation, we successfully enabled all designers to master 3D design. [Case Summary] ■ Challenges - Need for designing complex mechanisms that cannot be handled by 2D CAD ■ Results - Successfully enabled all designers to master 3D design through in-house training that closely understood individual proficiency levels and focused on maintaining motivation. *For more details, please refer to the PDF document or feel free to contact us.

  • Drawing, tracing, CAD

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[Case Study of 3D CAD Software for Mechanical Design] Nishijima Co., Ltd.

[Case Study of 3D CAD Software for Mechanical Design] Nishijima Co., Ltd.

[Free Case Study Provided] Efforts in 3D Design for In-House Integrated Production System and Multi-Skilled Worker Development!

We would like to introduce a case study of the implementation of "iCAD SX" at Nishijima Co., Ltd., which specializes in the design and development of dedicated machinery for automobile manufacturers. The company began partial implementation of mid-range 3D CAD around the year 2000, but faced challenges due to slow processing speeds. With the introduction of our product, they achieved significant improvements in processing speed, leading to enhanced efficiency in design operations. Additionally, they can manage both 2D and 3D data within a single file and utilize various 3D verification functions, allowing them to focus on upstream development. [Case Overview] ■ Challenges - Slow processing speeds of existing mid-range 3D CAD ■ Results - Enhanced efficiency in design operations due to significant improvements in processing speed *For more details, please refer to the PDF document or feel free to contact us.

  • Drawing, tracing, CAD

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[3D CAD Software Case Study for Mechanical Design] Toray Engineering Co., Ltd.

[3D CAD Software Case Study for Mechanical Design] Toray Engineering Co., Ltd.

[Free Case Studies Available] Establish a method to utilize 3D CAD and achieve results in collaboration with partner companies!

We would like to introduce a case study of the implementation of "iCAD SX" at Toray Engineering Co., Ltd., which develops, manufactures, and maintains production equipment and devices for Toray. The company faced challenges due to sporadic rework and parts ordering mistakes caused by interference and misalignment during equipment assembly, resulting in persistent losses. A promotion organization, including practical personnel from the design department, established a system and methods utilizing 3D CAD, leading to increased usage in the design field. 【Case Overview】 ■Challenges - Sporadic rework and parts ordering mistakes due to interference and misalignment during equipment assembly, resulting in persistent losses. ■Results - Established a system and methods utilizing 3D CAD, leading to increased usage in the design field. *For more details, please refer to the PDF document or feel free to contact us.

  • Drawing, tracing, CAD

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[Case Study of 3D CAD Software for Mechanical Design] N.P.C. Co., Ltd.

[Case Study of 3D CAD Software for Mechanical Design] N.P.C. Co., Ltd.

[Free Case Study Available] Achieve complete integration of 3D CAD with highly autonomous implementation and operation!

We would like to introduce a case study of the implementation of "iCAD SX" for N.P.C. Co., Ltd., which provides solar cell manufacturing equipment to countries around the world. The company was concerned about design errors such as discrepancies between assembly drawings and parts drawings, as well as interference between parts, and ordering mistakes due to misreading of three-view drawings. They recognized the need to improve design accuracy. To address this, they introduced 3D CAD. Prioritizing the principle that "designers should choose the tools they use," they found that the product could be operated in a way that felt like an extension of 2D CAD, with quick response times and a fast operational feel, which was the deciding factor in their choice. [Case Overview] ■ Challenges - Design and ordering mistakes occurring in a design environment using 2D drawings - Although various efforts had been made to reduce mistakes, progress had plateaued ■ Results - Achieved complete 3D CAD conversion for new designs with all 20 designers, including veterans - Significantly reduced design and ordering mistakes *For more details, please refer to the PDF document or feel free to contact us.

  • Drawing, tracing, CAD

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[Case Study of 3D CAD Software for Mechanical Design] Shirai Tech Co., Ltd.

[Case Study of 3D CAD Software for Mechanical Design] Shirai Tech Co., Ltd.

[Free Case Study Provided] Streamlining the design of glass processing machines through the full implementation of 3D CAD!

We would like to introduce a case study of the implementation of "iCAD SX" at Shirai Tech Co., Ltd., a professional company boasting advanced technical skills in glass processing machines for electronic circuit boards. The product was introduced to enhance and streamline design operations. Not only was the design lead time shortened, but by verifying potential interferences between devices, which often arise due to the complexity of mechanisms, we significantly reduced the number of returns from the manufacturing site. This initiative is promoting efficiency across the entire company, including the sales and procurement departments. 【Case Overview】 ■Challenges - There was anxiety among design personnel regarding 3D design. ■Results - Information for title fields and parts procurement lists, which were previously entered manually, is now automatically generated from 3D models. - The workload related to drafting has been significantly reduced. - Interference checks from the design stage have greatly decreased feedback and returns from the manufacturing site. *For more details, please refer to the PDF document or feel free to contact us.

  • Drawing, tracing, CAD

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[Case Study of 3D CAD Software for Mechanical Design] Yushin Seiki Co., Ltd.

[Case Study of 3D CAD Software for Mechanical Design] Yushin Seiki Co., Ltd.

[Free Case Studies Available] Evolving extraction robot technology by utilizing 3D data for optimal design!

We would like to introduce a case where "iCAD SX" was implemented at Yushin Seiki Co., Ltd., which boasts advanced technology in robots for extracting plastic injection molded products. Our product, which is fast, highly compatible with past 2D drawing data, and capable of quickly performing interference checks, weight, and center of gravity calculations, was introduced. We have achieved efficiency not only in design operations but also in assembly processes and communication with customers, thanks to a design system that responds swiftly to short delivery orders and a high level of design accuracy. 【Case Overview】 ■Challenges - Balancing strength that withstands lightweight and high-speed operation ■Results - Improved efficiency in design operations - Enhanced design accuracy - Advanced utilization of 3D data *For more details, please refer to the PDF document or feel free to contact us.

  • Drawing, tracing, CAD

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[Case Study of 3D CAD Software for Mechanical Design] Yamaoka Manufacturing Co., Ltd.

[Case Study of 3D CAD Software for Mechanical Design] Yamaoka Manufacturing Co., Ltd.

[Free Case Study Provided] Significant reduction in rework due to increased number of parts! Total man-hours compressed to two-thirds.

To Yamaoka Manufacturing Co., Ltd., a manufacturer of precision mold press machines related to semiconductors and electronic components, we would like to introduce a case study of the implementation of "iCAD SX." The company faced challenges such as an increase in rework due to the rising number of parts and increased costs of components resulting from a low reuse design rate. As a result, the goal of reducing design man-hours by a total of 26% within three years was achieved in two and a half years. The manufacturing awareness in the design and assembly fields has significantly improved. [Case Overview] ■ Challenges - Increase in rework due to the rising number of parts - Increased costs of components resulting from a low reuse design rate ■ Results - Significant reduction in mistakes and oversights during the design phase - A definite improvement in manufacturing levels, along with a better order environment *For more details, please refer to the PDF document or feel free to contact us.

  • Drawing, tracing, CAD

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Search Keywords Related to soft

COPYRIGHT © 2001-2025 IPROS CORPORATION ALL RIGHTS RESERVED.