soft×オートフォームジャパン - List of Manufacturers, Suppliers, Companies and Products

soft Product List

1～15 item / All 19 items

Displayed results
Software "AutoForm-TryoutAssistant"

Software "AutoForm-TryoutAssistant"

Direct communication is possible between the engineering department and the tryout department!

The "AutoForm-TryoutAssistant" is software that digitally supports actual tryouts. During tryouts, a draw-type modification loop is repeated until parts can be produced with the required quality. Modifications and corrective actions are inevitable, but each modification loop that can be avoided directly contributes to saving time and costs. 【Features】 ■ Digital support for mold factories ■ Direct communication between engineering and tryout departments ■ Fine-tuning of draw-type molds ■ Reduction of tryout loops and related costs 【Main Functions】 ■ Check process parameters and mold shapes before tryouts ■ Confirm the shape, dimensions, and relative positions of blanks ■ Record all vast data during the tryout process and each iteration ■ Comprehensive analysis of process parameters and corresponding shape modifications ■ Language selection options for the user interface *For more details, please refer to the external link page or feel free to contact us.

  • Scientific Calculation and Simulation Software
  • Cost management and cost estimation software
  • System kitchen equipment and accessories

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Software "AutoForm-HemPlanner"

Software "AutoForm-HemPlanner"

Software compatible with roll hemming and table top hemming.

"AutoForm-HemPlanner" is software that not only creates the die shapes necessary for simulation but also allows for easy definition and optimization of the hemming process. Since this process affects the appearance and quality of the surface, precision is extremely important. By using this product, you can streamline the definition of the hemming process. As a result, the design of the effective surface of the die no longer needs to rely on costly trial-and-error investigations based on experience. 【Features】 ■ Definition of the hemming process that meets quality and cost requirements ■ Consideration of feasibility in the early stages and final verification ■ Identification of typical hemming defects ■ Prediction of springback for the entire assembly after hemming 【Main Functions】 ■ Support for roll and table-top hemming ■ Evaluation of various hemming concepts in the early stages - Example of quick hemming ■ Final verification of hemming concepts - Example of advanced hemming ■ Definition of die shapes and die movements *For more details, please refer to the PDF materials or feel free to contact us.

  • Scientific Calculation and Simulation Software
  • Cost management and cost estimation software
  • System kitchen equipment and accessories

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Software "AutoForm-DieAdviser"

Software "AutoForm-DieAdviser"

Addressing challenges such as the introduction of new materials like ultra-high-strength steel, improvement of press and stroke rates, and reduction of lubricant consumption.

"AutoForm-DieAdviser" allows for the determination of optimal die designs and effective wear protection concepts based on the simulation results from AutoForm-FormingSolver. In this software, the durability of die materials, hardening, and die coatings is determined while considering production volume and press stroke rates. It enhances die design in the early stages of component development and enables high durability of dies along with cost reduction. 【Features】 ■ Definition of optimal die layouts (including die segments) ■ Cost-effective wear protection concepts based on production volume ■ Reduction in lubricant consumption ■ Improvement in die performance and durability 【Main Functions】 ■ Identification of areas with severe die wear ■ Distinction between sheet materials and component types ■ Wear protection concepts that combine appropriate die materials, hardening, and die coatings *For more details, please refer to the PDF document or feel free to contact us.

  • Scientific Calculation and Simulation Software
  • Cost management and cost estimation software
  • System kitchen equipment and accessories

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Software "Logopress"

Software "Logopress"

You can perform transport simulations and detect dynamic interfaces!

"Logopress" is software customized to meet the needs of progressive die manufacturers. It includes mold design software for the die industry, as well as software for predicting flattening and blanks, covering a wide range of functionalities that encompass the entire process characteristics of progressive die technology. By identifying potential issues early in the design stage, it is possible to avoid costly mold modifications in later stages. Utilizing the powerful options of each product enables smooth and efficient operations. 【Features】 ■ Customized to meet the needs of progressive die manufacturers ■ Design of molds, flattening, prediction of blank shapes, and nesting ■ Modeling of complex shapes in intermediate stages 【Lineup (excerpt)】 ■ Logopress3 Die Design ■ Logopress3 Strip Layout ■ Logopress3 Flattening ■ Logopress3 Progressive Blank Companion (optional add-on) ■ Logopress3 NESTING *For more details, please refer to the external link page or feel free to contact us.

  • Scientific Calculation and Simulation Software
  • Cost management and cost estimation software
  • System kitchen equipment and accessories

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Software "AutoForm-DieDesignerPlus"

Software "AutoForm-DieDesignerPlus"

Efficient creation and predictive correction of high-quality CAD surfaces for mold manufacturing.

"AutoForm-DieDesignerPlus" is a shape creation feature available through the AutoForm interface, designed to meet the needs of engineers responsible for creating CAD-quality surfaces. This software allows for the creation of high-quality CAD surfaces during the process design phase. The created surfaces can be used for accuracy prediction and correction, and can subsequently be exported for mold manufacturing. By utilizing AutoForm-DieDesignerPlus, you can significantly streamline the work during the process design phase. [Main Features] - Parametric die face shape modeling for press forming processes - High-quality correction of mold surfaces - A structured surface creation workflow tailored for press forming process design - Flexible and free modeling without restrictions on predefined styles or profiles - Automatic flange unfolding for created shapes

  • Scientific Calculation and Simulation Software
  • Cost management and cost estimation software

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
High-quality CAD surface creation and prediction correction software for mold making.

High-quality CAD surface creation and prediction correction software for mold making.

In the AutoForm Forming package, it is possible to create CAD-quality surfaces and perform predictive corrections, covering the entire process design.

"AutoForm-DieDesignerPlus" is a shape creation feature available through the AutoForm interface, designed to meet the needs of engineers responsible for creating CAD-quality surfaces. This software allows for the creation of high-quality CAD surfaces during the process design stage. The created surfaces can be used for accuracy prediction and correction, and can subsequently be exported for mold manufacturing. By utilizing AutoForm-DieDesignerPlus, you can significantly improve the efficiency of tasks during the process design stage. 【Main Features】 - Parametric modeling of die face shapes for press forming processes - High-quality correction of mold surfaces - A structured surface creation workflow tailored for press forming process design - Flexible and free modeling without restrictions on predetermined styles or profiles - Automatic flange unfolding for created shapes

  • Scientific Calculation and Simulation Software

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Software for quickly creating CAD-quality die faces.

Software for quickly creating CAD-quality die faces.

This is software that quickly creates CAD-quality die faces. It significantly reduces the time required to create CAD-quality die faces.

"AutoForm-ProcessDesigner for CATIA" is software that combines the expertise of press forming with the efficient design capabilities of CATIA V5. It standardizes process design at the corporate level and significantly reduces the time required to create CAD-quality die faces. With "AutoForm-ProcessDesigner for CATIA," you can create die layouts (including deep drawing and all processes after the second stage) while working within the CATIA environment. This software is designed to meet the needs of process designers. It consolidates various sketches and structural elements used in CATIA V5 into several very powerful features, enabling easy and rapid design of die faces. The comprehensive data structure simplifies the use of new features and improves collaboration between departments as well as between manufacturers and suppliers. The high-quality surfaces produced are characterized by a significant reduction in the number of control elements and appropriate continuity. For more details, please contact us or download the catalog.

  • Other Software
  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Hemming Process Optimization Software AutoForm-HemPlanner

Hemming Process Optimization Software AutoForm-HemPlanner

Software for easily defining and optimizing the hemming process.

With AutoForm-HemPlanner, you can easily define and optimize the hemming process. The software allows you to identify potential defects that may occur during the process, such as flange cracking, wrinkling, material overlap at corners, and material entrapment. By combining AutoForm-HemPlanner with AutoForm-Solverplus, you achieve an efficient process planning solution for hemming. For more details, please contact us.

  • Other Software
  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Software "AutoForm-StampingAdviser"

Software "AutoForm-StampingAdviser"

Initial evaluation of moldability based solely on the shape of the part, without considering the mold shape!

"AutoForm-StampingAdviser" is software that allows for the rapid and easy execution of feasibility evaluations for parts and processes, as well as considerations of blank shapes, material yield, and blank costs. It provides feedback on quality issues related to press forming, such as the risks of wrinkles, cracks, and excessive sheet thinning, as well as evaluations of blank unfolding shapes and material costs. 【Features】 ■ Feasibility evaluation of parts and processes ■ Feedback on quality issues related to press forming ■ Predictions of blank shapes and nesting 【Main Functions】 ■ Powerful and flexible configuration options ■ Quick modification of part shapes ■ Multiple blanking options ■ Use based on parts only or complete die shapes *For more details, please refer to the PDF materials or feel free to contact us.

  • Scientific Calculation and Simulation Software
  • Cost management and cost estimation software
  • System kitchen equipment and accessories

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Software "AutoForm-Explorer"

Software "AutoForm-Explorer"

It is possible to easily visualize defects on mold surfaces using digital stoning techniques!

"AutoForm-Explorer" is software that allows for easy and quick setup of simulations and evaluation of important result variables. For process planners and process engineers, it enables detailed definition and evaluation of the manufacturing processes for press forming die components. Additionally, the interpretation of results can be executed quickly and easily. 【Features】 ■ Efficient simulation setup ■ Identification and interpretation of defects ■ Verification of process feasibility ■ Rapid evaluation of results ■ Improvement of forming behavior of press forming die components 【Main Functions】 ■ Simple navigation concept based on workflows ■ Semi-automatic result evaluation ■ Application and management of corporate standards ■ Display of surface defects - digital stoning *For more details, please refer to the PDF materials or feel free to contact us.

  • Scientific Calculation and Simulation Software
  • Cost management and cost estimation software
  • System kitchen equipment and accessories

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Software "AutoForm-Sigma"

Software "AutoForm-Sigma"

It brings deep understanding and transparency to the molding process from the early engineering stages.

"AutoForm-Sigma" is software that enables the analysis of press-formed parts and processes, as well as improvements in robustness. It allows for the identification of which design parameters affect the quality of parts and to what extent. Additionally, it supports the identification of corrective actions when issues arise during trials and production. Furthermore, it can identify ineffective corrective actions and appropriate measures that lead to problem resolution. 【Features】 ■ Analytical process improvement ■ Stability and reliability of the forming process ■ Robust manufacturing processes ■ Minimization of defective formed parts ■ Minimization of correction loops and associated costs 【Main Functions】 ■ Automatic variation of design parameters ■ Verification of key design parameters ■ Assessment of noise and variation range of process parameters ■ Evaluation of process capability ■ Automatic execution of multiple simulations *For more details, please refer to the PDF materials or feel free to contact us.

  • Scientific Calculation and Simulation Software
  • Cost management and cost estimation software
  • System kitchen equipment and accessories

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Software "AutoForm-DieDesigner"

Software "AutoForm-DieDesigner"

You can proceed with the operation step by step for the entire project!

"AutoForm-DieDesigner" is software that allows for the rapid creation of alternative designs for die faces throughout the entire press forming process. Once a die face design is created, it can be used for process simulation with AutoForm-FormingSolver. The results can be evaluated with AutoForm-Explorer. By fully integrating die face design with simulation and result evaluation, it enables the quick assessment of multiple alternatives for process and mold concepts, as well as the selection of optimal concepts regarding formability, quality, and cost. 【Features】 ■ Creation of concept die faces ■ Evaluation of multiple process concept alternatives through direct integration with process simulation ■ Deep understanding and verification of the entire process design 【Main Functions】 ■ Creation of parameterized die face shapes for all processes ■ Creation of excess material based on customized profiles ■ Automatic unfolding of flanges on excess material surfaces ■ Modeling of shapes using morphing technology

  • Scientific Calculation and Simulation Software
  • Cost management and cost estimation software
  • System kitchen equipment and accessories

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Software "AutoForm-Compensator"

Software "AutoForm-Compensator"

Since multiple areas can be defined within the mold, the expected correction can be controlled analytically.

The "AutoForm-Compensator" is software that automatically adjusts the mold surface based on accurate springback calculations or measured springback data. When the user defines the expected correction area, that area is automatically corrected based on the springback calculation results. Using the expected correction shape, rapid and accurate mold verification can be performed. 【Features】 ■ Reliability in process planning and process engineering ■ Reduction of correction loops ■ No risk of corrections in subsequent processes due to springback 【Main Functions】 ■ User-defined expected correction areas ■ Support for free springback and clamped springback ■ Automatic adjustment of mold shapes *For more details, please refer to the PDF document or feel free to contact us.

  • Scientific Calculation and Simulation Software
  • Cost management and cost estimation software
  • System kitchen equipment and accessories

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Software "AutoForm-CostEstimator"

Software "AutoForm-CostEstimator"

An ideal method to replace traditional Excel-based worksheets and cumbersome manual calculations.

"AutoForm-CostEstimator" is designed for OEMs and mold manufacturers, allowing for quick calculation of mold costs during the process planning and cost estimation stages. This software automatically associates details of parts that affect mold costs with the production steps. With just a few clicks of the mouse, this product calculates mold costs based on the defined production sequence. This enables analytical evaluation of alternative production concepts and quickly identifies the most cost-effective concept. 【Features】 ■ Measurement of the impact of alternative pressing processes on mold costs ■ Calculation of mold costs based on CAD part data and pressing processes ■ Creation of reliable cost estimates in a short time 【Main Functions】 ■ Full graphic-based 3D approach using CAD part shapes ■ Automatic feature detection of part shapes ■ Intelligent cost calculation engine for pressing processes *For more details, please refer to the PDF materials or feel free to contact us.

  • Scientific Calculation and Simulation Software
  • Cost management and cost estimation software
  • System kitchen equipment and accessories

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Software "AutoForm-FormingSolver"

Software "AutoForm-FormingSolver"

We will conduct simulations of press molding using line, transfer type, or progressive type.

"AutoForm-FormingSolver" is software that simulates press forming using line, transfer, or progressive dies. It accurately and quickly simulates the entire press forming process, including the drawing process and springback and hemming from the second stage onward, allowing for verification. Once the simulation results are available, they can be displayed in AutoForm-Explorer to obtain detailed information about the forming process. 【Features】 ■ Simulation of line and progressive die press forming ■ Rapid and accurate simulation of deep drawing, re-strike, trimming, flanging, and hemming processes ■ Accurate simulation of springback ■ Deep understanding of the entire press forming process 【Other Features】 ■ Rapid verification of new process concepts to improve quality and reduce costs ■ Reduction of computation time utilizing SMP or MPP parallel processing technology ■ Enhanced options such as thermal effects, phase transformation, and tribology improvements *For more details, please refer to the PDF document or feel free to contact us.

  • Scientific Calculation and Simulation Software
  • Cost management and cost estimation software
  • System kitchen equipment and accessories

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Search Keywords Related to soft

COPYRIGHT © 2001-2025 IPROS CORPORATION ALL RIGHTS RESERVED.