更新日： 集計期間:Jun 03, 2026～Jun 30, 2026
※当サイトの各ページの閲覧回数を元に算出したランキングです。
更新日： 集計期間:Jun 03, 2026～Jun 30, 2026
※当サイトの各ページの閲覧回数を元に算出したランキングです。
更新日： 集計期間:Jun 03, 2026～Jun 30, 2026
※当サイトの各ページの閲覧回数を元に算出したランキングです。
121～150 件を表示 ／ 全 236 件
【2×4 membrane fire-resistant】 Ideal for insulation measures between concrete and lumber, and for leveling adjustments!
The industry's first medium to large-scale wooden building foundation packing. It insulates concrete from lumber and prevents moisture from contacting the wooden components. The foundation's unevenness can be adjusted up to 20mm.
Simplification of airtight housing construction
You can easily and reliably perform waterproofing and airtight processing around pipes using stretch-processed polyethylene material. It is easy to cut with steps and markings, accommodating various pipe diameters. Since tape processing is not required for the parts in contact with the pipes, anyone can easily install it, and the construction level on-site can be standardized. 【Features】 ■ No tape processing required for the parts in contact with the pipes ■ Compatible with a wide range of pipe diameters ■ Standardizes the construction level ↓ For more details, please download the catalog or contact us.
It is a non-combustible, insulating, and sound-absorbing material that is easy to install on complex curved surfaces due to the strength of the hexagonal wire mesh.
The rock wool non-combustible material, insulation, and sound-absorbing material "Roxeram Wired Blanket" is a JIS A 9504 artificial mineral fiber insulation material and JIS A 6301 sound-absorbing material that allows for easy installation on complex curved surfaces due to the strength of the hexagonal wire mesh. It is used for thermal insulation in industrial facilities such as power plants and incinerators, as well as for insulation and heat retention in various tanks, round ducts, and large-diameter pipes, and for the insulation of pulp flanges. Orders can be placed without the hexagonal wire mesh. For more details, please download the catalog.
Combines airtightness, waterproofness, and dustproof functionality.
It can be easily installed just by sandwiching it between a metal plate or a resin plate. Also, since no adhesive is used, temporary fixing is not necessary, allowing for simplification.
Easy to install without adhesive!
The "Silicone Trim" is a packing primarily used in medical devices, testing equipment, and inspection instruments. This product, which protects edges and has a sealing part, combines airtightness, waterproofness, and dustproof functions. Additionally, it achieves the creation of a trim with high heat resistance, high chemical resistance, and long lifespan due to the properties of silicone rubber. Although silicone rubber has lower adhesive properties compared to other synthetic rubbers, its core structure allows for easy installation without the use of adhesives, making it easy to remove as well, thus providing excellent maintainability. It can be widely used according to the intended purpose. 【Features】 ■ Chemical resistance ■ Easy installation ■ Good maintenance ■ Colorability *For more details, please refer to the catalog or feel free to contact us.
It can bend freely, making it easy to install in corner areas! It uses metal in the framework, providing high strength.
The "Trim Series" is a metal composite structure packing that protects edges and features a sealing part, combining airtightness, waterproofness, and dustproof functionality. It can be easily installed by simply sandwiching it between steel plates or resin boards. Since no adhesive is used, temporary fixing is unnecessary, simplifying the process. Additionally, because it uses resin and rubber materials, it can be selected based on the usage environment, and the use of metal in the framework provides high strength. 【Features】 ■ High strength due to the use of metal in the framework ■ No adhesives used at all ■ Removable for easy maintenance ■ Flexible for easy installation in corner areas ■ Resin materials can be colored (consultation required) *For more details, please refer to the PDF document or feel free to contact us.
We are producing "door stop molds" with approximately 100 types of molds prepared for trains, buses, and other door packings.
<Details of Production Examples> ■Supported Materials: Soft PVC, TPO, and others ■Supported Sizes: Customized according to your requests We can discuss materials and shapes according to the location and purpose. Please feel free to consult with us. *For more details, please contact us or download the catalog.
A foundation airtight packing that can maintain airtightness long-term with simple installation!
"Rail" is a foundation airtight packing made using EPDM rubber foam, which is adopted in high-end cars around the world, and JISA-6930 residential plastic moisture-proof film. It maintains airtightness for a long time with simple installation, ensuring high and stable housing performance. Additionally, it is environmentally friendly as it does not contain asphalt, achieving easy installation by simply placing it. 【Features】 ■ Houses with airtightness levels below 0.0 are being completed one after another. ■ Foundation packing for external insulation and foundation insulation. ■ A combined product of EPDM rubber foam and JIS A-6930 compliant materials, along with a 0.2mm polyethylene film. ■ Integrated moisture-proof sheet and foundation airtight packing material. *For more details, please download the PDF or feel free to contact us.
The rubber has good elasticity and adheres well to CD pipes and PF pipes! It is also excellent in weather resistance due to EPDM rubber.
NEW HIKARI is the original brand of Shimizu Corporation. We offer a wide range of construction hardware, fittings, and equipment for professional craftsmen and specialized contractors. We have been appreciated for our reliable quality across various fields for many years. The 'Gom Packing CD/PF' is designed to fit pipe diameters φ14 to 28 and is a product that can block gaps around CD pipes and PF pipes. Additionally, it is made of EPDM rubber, which excels in weather resistance, has good elasticity, and adheres well to CD pipes and PF pipes. 【Features】 ■ Blocks gaps around CD pipes and PF pipes ■ Good elasticity of rubber, adheres well to CD pipes and PF pipes ■ Fits pipe diameters φ14 to 28 ■ Excellent weather resistance with EPDM rubber ■ Comes in a pack of 2 *For more details, please download the PDF or feel free to contact us.
For screw assembly, we will improve the water-tight performance of screw fastening.
For screw assembly, it improves the water-tight performance of screw fastening. *For details, please download the catalog or feel free to contact us.*
We will improve the sealing performance of screws for screw assembly.
We will improve the sealing performance of screws for screw assembly. *For details, please download the catalog or feel free to contact us.
![[Molding and Processing Examples] Strainer Packing](https://image.www.ipros.com/public/product/image/0df/2000817051/IPROS92567909683360875894.png?w=280&h=280)
By using insert molding, it enables measures against peeling at the seal part and automates assembly!
We would like to introduce the rubber products we are involved with. By insert molding the Strena packing, we can address the peeling issues at the sealing part and enable automation of the assembly process. Our company also provides support from the material selection and design stages, so please feel free to consult us regarding rubber molding and processing. 【Overview】 ■Product Name: Strena Packing *For more details, please refer to the PDF document or feel free to contact us.
These are gaskets made of fluororesin. We offer three types: for flanges, for ferrules, and L-shaped. *Compliant with the Food Sanitation Act and FDA standards.
◆ For Flanges Specially molded PTFE, making it a soft and flexible material. Sealing is possible with low tightening force. ◆ For Hoses The NR2115 type uses a special PTFE material that has hardness but reacts to X-ray detection devices, metal detectors, and magnetic detectors. The NR2116 type has a surface made of rubber (EPDM) that retains elasticity, with only the liquid-contacting part covered in PTFE. ◆ Sanitary L-Type The NR2117 type has a surface made of rubber (EPDM) that retains elasticity, with only the liquid-contacting part covered in PTFE.
Minister of Land, Infrastructure, Transport and Tourism certified product! It is an inorganic high-fill synthetic rubber-based foam sponge.
The Active Gasket AG-04 is an inorganic high-filled rubber foam gasket primarily made of nitrile rubber. It is optimal for use as a gasket for the joint of common plate flanges in general air conditioning ducts. It is a non-combustible material certified by the Minister of Land, Infrastructure, Transport and Tourism. It has excellent weather resistance and does not undergo powdering due to aging or deterioration. Additionally, it is compliant with sick house syndrome regulations and does not use toluene in its adhesive materials. Asbestos is also completely excluded. 【Features】 - Synthetic rubber sponge primarily made of nitrile - Also has oil resistance (for plant and animal oils) - Passed heat resistance tests with a heat resistance temperature of below 100°C - Compliant with sick house syndrome regulations - Asbestos-free For more details, please contact us or download the catalog.
We will create from one piece based on the drawings and actual items! Introduction to rubber and packing technology.
We would like to introduce the technology of "Rubber and Packing" from Takahashi Belt Co., Ltd., a comprehensive trading company for industrial supplies. Our company is capable of producing items from one piece based on drawings or actual products. Additionally, packing processing can be provided quickly and reasonably using CAD. 【Features】 ■ Production possible from one piece ■ Production using customer-supplied materials is also possible ■ Packing processing uses CAD ■ Quick and reasonable provision possible *For more details, please download the PDF or feel free to contact us.
Auxiliary fixing member for glass and U-shaped components!
We would like to introduce the 【Joint Packing】 that we handle. A packing material that assists in fixing glass and U-shaped components. - Simply insert it into the U-shaped component against the glass. * This is a supplementary component for fixing. Please feel free to contact us when you need assistance. * For more details, please refer to the PDF document or feel free to contact us.
These are mechanical components used in OA machines, medical devices, measuring instruments, machine tools, and communication equipment.
It is a dustproof rubber available in a variety of sizes.
These are mechanical components used in OA machines, medical devices, measuring instruments, machine tools, and communication equipment.
(1) It has excellent weather resistance, cold and heat resistance, and chemical resistance (acid and alkali). ★ (2) Since the compressive load (stress) is small, it does not deform the structure after filling the joints. ★ (3) It can be easily compressed. ★ (4) It adapts to gaps with rough surfaces and the expansion and contraction of structures with temperature differences, providing good water tightness. ★ (5) During heating or compression, no components leach out from the foam. ★ (6) It is lightweight (specific gravity 0.15) and does not fuse with other foams, making installation and storage easy.
![Friction Dampening Packing "UFO-E" [No Damage from the Kumamoto Earthquake]](https://image.www.ipros.com/public/product/image/f59/2000287804/IPROS46160899370818707871.png?w=280&h=280)
Simply replacing the base packing is effective for large earthquake measures! It uses the same insulation method as seismic isolation structures, yet the cost is only 1/10 of that of seismic isolation structures!
Simply replacing the conventional foundation packing with the "Friction Damping Device UFO-E" is effective for large earthquake countermeasures. It is low-cost, easy to install, and eliminates all anxiety factors related to earthquakes. 【Points of UFO-E】 ■ High performance "insulation method" for large earthquakes It slides before seismic forces enter the building, reducing acceleration from 300 to 800 gal through friction resistance (braking). ■ Countermeasures against furniture tipping and resonance due to first-floor shaking! The insulation method separates the foundation from the base, effectively reducing first-floor shaking and the risk of resonance! ■ Cost-effective! Although it uses the same insulation method as seismic isolation structures, the cost is one-tenth that of seismic isolation structures. ■ Easy to install! It can be simply inserted into anchor bolts by carpenters. *For details, please request materials or view the PDF data from the download section. *You can watch experimental videos and more on the UFO-E special page: https://ufo-e.com/
[For Factories] Cost reduction with total services from construction to maintenance!
IEST Corporation flexibly responds to the requests of those in the plant industry, such as "I want a low-cost solution." We provide high-quality and reasonably priced gaskets for heat exchangers needed in plants (with a warranty period). Additionally, we perform detailed cleaning and maintenance on behalf of busy managers. 【Products and Services for Plants】 ■ Consumable Parts: Reasonable prices and prompt responses ■ Cleaning Agents: Incredible cleaning power that reduces cleaning time ■ Maintenance: Strong support from a professional perspective ■ Fuel Reforming Equipment: FENIC, with 20 years of experience in the automotive industry! *For more details, please refer to the PDF materials or feel free to contact us.
Rapid and stable supply of plates and gaskets from all manufacturers! Numerous achievements overseas with high-quality inspection and maintenance.
In fields such as food, chemicals, steelmaking, electricity, shipping, and air conditioning systems, our company supplies and sells plate heat exchanger plates and gaskets to a wide range of customers, and we also provide inspection and maintenance services. In addition to our own manufactured heat exchangers, we can quickly supply parts such as gaskets and plates compatible with heat exchangers from various manufacturers. We can propose solutions tailored to the situation, such as scale removal and improvement of thermal efficiency, contributing to the reduction of maintenance costs. ★ With the cooperation of our group companies, we have numerous maintenance achievements overseas! You can view materials introducing user voices from the "PDF Download" section. 【Support Content】 ■ OEM gasket supply ■ Emergency troubleshooting ■ Reconditioning ■ CIP services
Perfectly, neatly, safely! Nomura Kasei's original magnet packing.
The "Magnet Packing" is our original product that closes doors using the magnetic force of the built-in magnet. Custom orders are possible from just one unit, and due to its cushioning properties, it closes perfectly without gaps, eliminating the need for a locking mechanism. We offer three types: the "Snap Type," which does not require screws; the "Screw Type," which uses a strong magnet; and the "Bar Type (Flat)," which can be used by threading through rails, etc. 【Features】 ■ Custom orders available from just one unit ■ Closes without gaps due to cushioning properties ■ Built-in magnet eliminates the need for a locking mechanism ■ Can be opened from the inside ■ Made of resin for durability *For more details, please refer to the PDF document or feel free to contact us.
A wide range of products including "roof drains" and other net and sheet materials is featured!
This catalog introduces the products handled by Kenzo Trading Co., Ltd., which sells construction machinery components and building materials. We feature items such as the "Roof Drain," a fitting designed to guide rainwater into drainage pipes while removing debris like fallen leaves, as well as "Floor Hatches" and "Suspension Rings/Suspension Fittings." [Featured Items (Partial)] ■ Roof Drain ■ Floor Hatch ■ Suspension Ring/Suspension Fitting ■ Tread ■ Rooftop Canopy ■ Amenity Step ■ No-Bren Lofty Step *For more details, please refer to the PDF document or feel free to contact us.
A packing and gap prevention tape that can be widely used for pest control in the kitchen and to prevent finger pinching.
We would like to introduce our insect-proof edge tape, "Bouchu Edge," which we handle. It can be widely used for pest prevention in kitchens, soundproofing during door openings and closings, preventing finger pinching, and sealing gaps. We offer a lineup that includes single packings, tape packings, and cushion tapes. 【Lineup】 ■ Single Packing - BE-1135 - BE-0876 - BE-1080 - PLA-11128 *For more details, please refer to the PDF document or feel free to contact us.
[Metal Slider 600] Simultaneous processing of dross and burrs with a double grinding method! Solving the issues of "difficult-to-remove dross" and "wanting to efficiently remove dross."
The "Metal Slider 600" is a product that enables consistent finishing from dross removal to edge R finishing using a double polishing method. It comes standard with a plate thickness detection sensor and a belt cleaning mechanism. Settings can be easily configured via a touch panel. Additionally, there is a larger model, the "Metal Slider 1000 (adopting a 2x2 double polishing method)." ▼ Solutions for the following problems! - Difficult to remove dross with conventional deburring machines - Burrs can be removed, but dross is hard to take off - Want to efficiently remove dross 【Features】 ■ Simultaneous processing of dross and burrs with a double polishing method ■ Standard equipped with plate thickness detection sensor and belt cleaning mechanism ■ Easy settings via touch panel ■ A larger model, the "Metal Slider 1000 (adopting a 2x2 double polishing method)," is also available 【Products tailored to your needs!】 ■ For deburring, use "Metal Esthe" ■ For dross removal + deburring + finishing, use "Metal Esthe Premium" ■ For stubborn dross removal, use "Grind Esthe" ■ For compact sizes, use "Metal Hands - Metal Touch" ■ For easy processing of hairlines, use "Metal Lines" *For more details, please refer to the PDF document.
Abundant materials that can cater to all departments!
Yoshikawa Kogyo Co., Ltd. is a company engaged in the processing, sales, and shipbuilding-related construction of thermal insulation materials, sealing materials, sound-absorbing and soundproofing materials, and related products. In terms of sealing materials, we mainly handle gland packing, joint sheets, gaskets, and mechanical seals. Gland packing has good compatibility with shafts and is a packing that experiences minimal shaft wear, making it suitable for a wide range of conditions including water, oil, weak acids, and stern tube shafts. We respond promptly to the needs of various industries such as shipbuilding, power, steel, chemicals, vehicles, and construction, offering a wide range of reliable products. 【Main Processing Methods】 ■ Punching processing ■ Adhesive processing ■ Sewing processing ■ Cutting processing *For more details, please download the PDF or feel free to contact us.
No need for paste! High-performance non-asbestos heat-resistant joint sheet packing.
"#4635" is a high-performance non-asbestos heat-resistant joint sheet packing. With an improved heat resistance due to a special heat-resistant binder, it achieves a top-class usage temperature of "350℃" for joint sheet flange packing. Thanks to a tough material with a carefully formulated composition, it can withstand rapid changes in temperature and pressure, as well as excessive tightening. 【Features】 ■ Domestic joint sheets processed in Japan ■ No paste required ■ Capable of rapid temperature and pressure changes ■ Sufficient compression characteristics ■ High sealing performance under high pressure ■ Resistant to sticking *For more details, please refer to the PDF document or feel free to contact us.
For all kinds of packing, piping materials, and plumbing work, leave it to us!
Okayama Packing Co., Ltd. manufactures and provides a wide variety of products, from sealing products such as packings and gaskets to various products that apply those technologies. We procure with optimal quality and cost to meet the needs of all plant equipment in accordance with delivery schedules. We respond to user needs and create safety and comfort with reliable technology. 【Products Offered】 ■ Sealing products ■ Piping materials ■ Various sealing materials, adhesives, and others ■ Maintenance supplies ■ Environmental conservation equipment and systems, caregiving tools *For more details, please download the PDF or feel free to contact us.
![[Thomson Processing Case] Packing for Industrial Equipment 2](https://image.www.ipros.com/public/product/image/aaf/2000467574/IPROS49381912699522478180.jpeg?w=280&h=280)
Introducing examples of Thomson processing for gaskets (rubber and sponge) used in industrial equipment!
**Introduction to Thomson Processing Case Studies** Material: Rubber and Sponge Application: Gaskets for Industrial Equipment **Features of Seiei's Thomson Processing** - Press processing can accommodate shapes and materials up to approximately MAX 1000 x 2000. - Flexible support for mass production with multiple cutouts and cleanroom processing. - Materials that can be cut with cutters or scissors can be processed. - Thomson processing or half-thomson processing is possible after applying double-sided tape to the material. - We can work with supplied materials or handle material procurement; both options are available. - Proven track record with automotive manufacturers, electronics manufacturers, industrial equipment manufacturers, etc. *For more details, please feel free to contact us.*
