Last Updated： Aggregation Period:Jul 30, 2025～Aug 26, 2025
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Jul 30, 2025～Aug 26, 2025
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Jul 30, 2025～Aug 26, 2025
This ranking is based on the number of page views on our site.
151～165 item / All 309 items
Fluororesin coil
We are cutting fluoropolymer PFA into short lengths. It has properties such as slip resistance, chemical resistance, heat resistance, and release properties. It can be used as a substitute for small diameter rolls or rollers. Please consider it for components with a large number of guides, etc.
Easy installation to streamline inspection and cleaning operations. Prevents damage to high-pressure hoses.
Easy Four is a multipurpose manhole roller that prevents damage to camera cables and high-pressure hoses, and enhances the efficiency of inspection and cleaning work with easy installation.
The low ink transfer, which has been a challenge in water-based flexo printing, has been achieved at 95-100%. Moreover, it allows for high-definition printing, savings on ink costs, and prevention of mottling effects.
A special powdered material for which CAE Corporation has obtained exclusive patent rights, enabling automatic processing in sync with ceramic processing. ■ Smooth and high hardness resembling black pearls ■ High-precision cell wall width structure ■ The occurrence rate of fine pores is less than 0.5%. ■ Ink transfer rate improvement (95-100%) allows for over 20% reduction in ink costs. ■ Flexible cell customization ■ Significantly improved cleaning efficiency, allowing for long-term storage of initial anilox specifications ■ Capable of ultra-high dimensional flexographic printing
Contributes to the longevity of rollers! There are numerous usage records at various steel mills, especially for billets.
"Silicoloy" has composite properties of heat resistance, corrosion resistance, wear resistance, and high-temperature oxidation resistance, contributing to a reduction in the frequency of roller replacements, maintenance, and overall cost reduction. "Silicoloy A2" is an all-round stainless steel that contains approximately 3.5% high silicon in its chemical composition. Silicon contributes to properties such as heat resistance, oxidation resistance, hardness, strength, and corrosion resistance. Rollers made of Silicoloy A2 are particularly used for top rollers (foot rollers) for billets and have a proven track record. 【Features of Silicoloy】 ■ Corrosion resistance: Relatively high corrosion resistance against water and strongly acidic powders. ■ Fracture toughness (heat check resistance): Minimal occurrence of heat cracks from repeated high temperature to rapid cooling, with excellent resistance to crack propagation. ■ High-temperature corrosion wear resistance: Superior overall performance, contributing to the longevity of rollers. *For more details, please refer to the PDF materials or feel free to contact us.
Powder ceramic coating roller with an environmentally friendly coating treatment.
◆ Since it is a dry method, it does not use any volatile organic solvents, making it an environmentally friendly coating roller. ◆ It has excellent wear resistance and durability. ◆ The grip can be adjusted by changing the particle size of the ceramic powder.
Lightweight roller with improved precision
As the demand for lightweight rollers using aluminum extrusions (such as Mitsuya pipes and Yotsuya pipes) and iron pipes is increasing, Toyo Techno is working on improving the precision of its rollers. For more details, please contact us or refer to our catalog.
Universal rubber roller of the Mirable type
At Toyo Techno, we handle rubber rollers mainly used in feeding systems, conveying systems, and discharging systems. We treat them as finished products, from processes such as rubber insertion and baking to grinding finishing. Additionally, in grinding processing, depending on the conditions, we can achieve rubber thicknesses of less than 1mm, and an outer diameter tolerance of up to 0.04 is possible. For more details, please contact us or refer to our catalog.
A lineup of five types of coating rollers: "urethane," "beads," "powder ceramic," "ceramic," and "silicone"!
It is possible to change the coating material depending on the intended use. Various properties such as wear resistance, durability, grip adjustment, precise feeding accuracy, and prevention of ink and paper dust adhesion can be modified for different purposes. It is suitable for feeding rollers and drive rotors of OA equipment such as printers, copiers, FAX machines, and plotters. ◇◆◆◇◆━━━━━━━━━━━━━━━━━━━━━━━━━ For more details, please download the catalog and take a look. Alternatively, feel free to contact us. ━━━━━━━━━━━━━━━━━━━━━━━━━◇◆◆◇◆
It is a coating roller that excels in abrasion resistance, durability, and is environmentally friendly.
Conventional ceramic coatings were processed using spraying and adhesion, but with powder, we can utilize the performance of traditional ceramic coating rollers while also providing an environmentally friendly coating treatment. Since it uses a dry method, it does not use any volatile organic solvents, making it an eco-friendly coating roller. It excels in wear resistance and durability. Additionally, by changing the particle size of the ceramic powder, the grip can be adjusted. For more details, please contact us or refer to the catalog.
Are you missing the dust stuck to your gloves? Thoroughly remove dirt and dust from your gloves! A sticky roller for gloves.
Conventional peel-off adhesive rollers have the problem of dust that has been picked up scattering when peeling the sheet, and the disposal of the sheets incurs costs. Hand rollers use water to wipe away dirt, so there is no scattering of dust, and they can be reused without generating waste. 【Key Points of the Hand Roller】 ■ Removes over 90% of dirt from gloves and clothing! Made from soft urethane gel material. It conforms to uneven surfaces and removes dirt that is not visible to the eye. ■ Contains "antibacterial and antifungal agents"! Safe to use even in food factories where the growth of bacteria and mold is a concern. ■ Does not use silicone in the materials. ■ No adhesive used! It removes dirt using the self-adhesive properties of urethane, so it does not transfer glue to clothing and does not feel sticky. ■ Washes off dirt with water! Can be fully washed! When dirty, washing with water restores the adhesive properties, allowing for repeated use. *For more details, please download and view the catalog.
Are you struggling with the running costs of adhesive rollers and the amount of waste they produce? Reusable with an over 90% removal rate! Contributes to SDGs too!
Conventional adhesive rollers that peel off use adhesive paper, which can generate waste when used and may transfer glue. The body roller, made of soft gel material, adheres closely to the contours of clothing and removes over 90% of hair and dust. It can be washed with water when dirty, producing no waste, making it a roller that contributes to the SDGs. ★Using a dedicated cleaner can also provide disinfection!★ 【Key Points of the Body Roller】 ■ Removes over 90% of dirt from gloves and clothing! Made from soft urethane gel material, it conforms to irregularities and removes dirt that is not visible to the eye. ■ Contains "antibacterial and antifungal agents"! Safe to use even in food factories where the growth of bacteria and mold is a concern. ■ Does not use silicone in its materials. ■ No adhesive materials used! Utilizes the self-adhesive properties of urethane to remove dirt, so there is no glue transfer to clothing, and it does not feel sticky. ■ Wash away dirt with water! Can be fully washed! When dirty, washing with water restores its stickiness, allowing for repeated use. The handle can also be easily detached for washing under running water. *For more details, please download and view the catalog.*
We remove micron-level foreign substances!
The principle is extremely simple: by bringing a clean roller made of special materials into contact with the target product, foreign substances on the product are removed, and the removed foreign substances are transferred to an adhesive film. There are also inline devices that adopt a two-stage system of cleaning rollers and adhesive rollers, which can maintain a constant foreign substance removal capability during operation. 【Features】 ■ It is capable of removing foreign substances at the micron level. ■ No chemicals are released from the roller side to the substrate side.
The width of the roll is 45±1.5mm! Introducing the tape pressure roller!
A testing machine for measuring the force required to peel off tape, known as peel force (adhesive force). Easy operation with a 5-inch touch panel. Crimping speed of 50 to 1200 mm/min. Up to 99 cycles can be programmed.
A diverse lineup for large diameter and curved applications! Extension rollers that do not damage cables.
The Fujii Electric's "5R-1010" features a unique 5-roller structure that allows for cable pulling without damaging the cable, whether in a straight line or around curved poles. We offer a lineup tailored to various applications, including large diameter, pipe-compatible, and curved options. 【Features】 ■ Pulling rollers ■ Does not damage cables in straight lines or around curved poles ■ Lineup tailored to applications *For more details, please refer to the PDF document or feel free to contact us.
