Last Updated： Aggregation Period:Dec 24, 2025～Jan 20, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Dec 24, 2025～Jan 20, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Dec 24, 2025～Jan 20, 2026
This ranking is based on the number of page views on our site.
76～90 item / All 158 items
High voltage up to 100kV, high frequency of 100MHz, long cables up to 30m.
We can observe high-voltage, high-frequency waveforms from devices such as circuit breakers, transformers, and inverters, and we also provide long cables.
A compact residual magnetic measurement device ideal for measuring the residual magnetic flux density of magnetic materials.
The "Tesla Gauge GT-301" is a compact residual magnetic measurement device ideal for measuring the residual magnetic flux density of magnetic materials and for simple measurements of permanent magnets. It has three measurement ranges: 30mT, 300mT, and 1000mT. It features an auto-zero function, peak hold function, DC/AC function, and auto power-off function. The dimensions are W77×D27×H140mm, and the weight is approximately 300g (including the battery). 【Features】 ■ 4-digit display, 3 ranges ■ Auto-zero function, peak hold function ■ DC/AC function ■ Auto power-off function ■ Polarity indication For more details, please refer to the catalog or feel free to contact us.
Digital communication function included! Oil moisture meter probe.
● A sensor with excellent long-term stability and contamination resistance ● Easy-to-install structure ● Available with RS485 interface ● Display measurement data in conjunction with Sigma 05 ■ The MOP301 can accurately measure moisture contained in insulating oil, lubricating oil, diesel oil, and more. It is ideal for preventive maintenance of equipment machinery. In addition to accurate measurements of moisture activity [aw] and temperature [T], the MOP301 can calculate the absolute moisture content in oil in ppm units. This calculation is based on the oil's specific solubility parameters.
A probe that can measure even in harsh environments up to 20 bar and 120℃.
● Modbus RTU with RS485 ● Excellent long-term performance even in dusty and dirty environments ● Pressure resistance up to 20 bar ● Wide temperature range -40 to +120°C ■ The HTP501 can reliably measure relative humidity (RH) and temperature (T) in industrial process control applications in harsh environments up to 20 bar. In addition to measuring relative humidity (RH) and temperature (T), the HTP501 can calculate all humidity-related physical quantities such as dew point temperature (Td), absolute humidity (dv), and mixing ratio (r).
Long-term stability! Probe-type humidity and temperature sensor.
● High-precision humidity (RH) and temperature (T) measurement ● Plug-in and replaceable ● Excellent long-term stability ● Very low power consumption ● Digital output ■ The EE07 is suitable for general air conditioning management and OEM applications, utilizing the proven E+E HC105 humidity (RH) sensor. This sensor is available with a polycarbonate housing and a metal housing, as well as a probe for temperature (T).
Log collection, export NetFlow to any flow collector!
Are you having trouble finding a tool that can dump traffic within the LAN? 'nProbe' operates immediately as a NetFlow probe just by connecting to a mirror port or TAP. It collects logs for traffic analysis and exports NetFlow to any flow collector. 【Features】 ■ There is a risk of not being able to configure NetFlow → Generates NetFlow v5/v9 and IPFIX in probe mode ■ The protocols for export are not unified → Unifies to NetFlow v5/v9 and IPFIX, sending to any flow collector *For more details, please refer to the PDF document or feel free to contact us.
[Application Case] Introduction of the EMS (Immunity) Pre-evaluation System
Instead of bringing the Equipment Under Test (EUT) to the EMC test site and conducting immunity tests multiple times, a simplified interference wave test can be performed. By operating a dedicated program, the electric field strength of the radiated interference wave is set. Following the GUI screen instructions, the electric field probe measures the target area (up to 4 locations). To enhance testing accuracy, the probe's position is changed while automatically generating flexible calibration data. 【Solution】 An electric field probe is installed on the EUT placement stage inside the anechoic chamber. Calibration data is automatically generated by the test software according to the size of the EUT. (1) The electric field probe is placed at any position on the stage. (2) Align the EUT surface facing the antenna and measure the electric field strength (up to 4 locations). (3) Record calibration data for each position according to the target frequency range. (4) Incorporate the calibration data into the test software and start the EMS pre-test. *For more details, please refer to the PDF document or feel free to contact us.
A semi-custom UV sensor boasting over 1,730 combinations.
We respond to our customers' needs with high customizability and short delivery times. - We accommodate small production runs starting from just one piece. - High resistance to UV exposure → Long lifespan.
Rechargeable is already old! The 'Laser Power Supply Electric Field Probe' that doesn't require charging.
• Laser power supply – No charging required • Ultra-small size • High resolution, high speed, low noise • Frequency range: 10KHz-6GHz • Electric field strength 0.1V/m-10kV/m • Wide dynamic range • Continuous real-time data streaming • PC computer interface & software included
High-performance electric and magnetic field measurement probe 10Hz to 3KHz
【Features】 - Electric and magnetic field measurement - Isotropic and true effective value measurement - Measurements according to international standards IEC62110 & IEC61786
High-performance mobile phone probe for electric field measurement in 900/1800/2100 bands.
【Features】 - Specific mobile frequency probe - Isotropic & true effective value measurement - High sensitivity 0.04V/m - High interband attenuation
A compact electromagnetic field sensor with a size of only 3cm², capable of measuring both electric and magnetic fields with high precision. Spectrum analysis and FFT measurement are possible.
Complies with IEC/EN62233, IEC/EN62822, and IEC/EN62311 standards. Ideal for measurements where small size and spatial resolution are important. 【Main Features】 - High-precision measurement of electric and magnetic fields with a 3cm² electromagnetic field sensor - Isotropic & true RMS measurement - Spectrum analysis - Equipped with FFT mode - Complies with international standards IEC/EN62233, IEC/EN62822, and IEC/EN62311
High-performance isotropic electric field probe capable of measuring up to 40GHz!
【Features】 - High dynamic range 60dB - Isotropic & effective value measurement - Excellent attenuation - Compliance with international standards
Ideal for evaluating mobile phone base stations. Field strength measurements for 700-900, 1800-1900, 2100, and 2600 bands.
【Features】 - Mobile frequency probe - Isotropic & true effective value measurement - High sensitivity 0.04V/m - High inter-band attenuation - Electric field measurement
