nozzle(3mm) - List of Manufacturers, Suppliers, Companies and Products

nozzle Product List

46～60 item / All 67 items

Displayed results
Three-group standard fan-shaped nozzle "Yamagata distribution nozzle (disassemblable) V"

Three-group standard fan-shaped nozzle "Yamagata distribution nozzle (disassemblable) V"

Ceramic three-group shape! Disassemblable serrated distribution nozzle that generates a fan-shaped spray.

The "Yamagata Distribution Nozzle V" can generate a fan-shaped spray with a Y-shaped flow distribution that is strong in the center and gradually weakens towards both ends. When overlapping the patterns at both ends during multiple nozzle arrangements, the flow distribution becomes uniform across the entire width. This nozzle consists of three parts: a spray chip, a cap, and an adapter, and only the worn spray chip can be replaced. 【Features】 ○ Disassemblable Yamagata distribution nozzle ○ Ceramic used in the spray chip nozzle section ○ Strainer is standard on small flow products and can be removed ○ The cell team consists of ceramic and resin spray chips → The ceramic nozzle is molded with a robust engineering plastic For more details, please contact us or download the catalog.

  • Aggregates and crushed stone
  • Water and sewerage pipe fittings
  • Roof and gutter construction

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
2-fluid nozzle "Hollow Cone Nozzle (Low Flow Spray) CBIMK"

2-fluid nozzle "Hollow Cone Nozzle (Low Flow Spray) CBIMK"

Compact type! Hollow cone nozzle that generates fine mist with an average particle diameter of 100μm or less.

The "Hollow Cone Nozzle (Low Volume Spray) CBIMK" is a two-fluid hollow cone nozzle that generates a fine mist with an average particle diameter of less than 100μm in an annular spray pattern. It consists of four components: nozzle tip, core, cap, and adapter, and is a liquid pressurized type that sprays at a pressure of approximately 0.1 to 0.3 MPa. It has a wide flow adjustment range with a spray angle of 60°. This is an internal mixing type that atomizes by mixing compressed air and liquid inside the nozzle. 【Features】 ○ Two-fluid hollow cone nozzle that generates a fine mist with an average particle diameter of less than 100μm ○ Liquid pressurized type that sprays at a pressure of approximately 0.1 to 0.3 MPa ○ Annular spray pattern ○ Wide range of spray flow adjustment ○ Structure that is resistant to clogging For more details, please contact us or download the catalog.

  • Water and sewerage pipe fittings

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Self-cleaning fan-shaped nozzle "Yamagata distribution nozzle (with self-cleaning mechanism) MOMOJet"

Self-cleaning fan-shaped nozzle "Yamagata distribution nozzle (with self-cleaning mechanism) MOMOJet"

Fan-shaped spray with Yamagata flow distribution! A fan-shaped nozzle with a cleaning mechanism in the nozzle body.

The "Yamagata Distribution Nozzle (with Self-Cleaning Mechanism) MOMOJet" can generate a fan-shaped spray with a Yamagata flow distribution, where the center is strong and gradually weakens towards both ends. The nozzle body has a cleaning mechanism that allows for self-cleaning when foreign objects clog the nozzle, enabling normal spraying. By reducing the spray pressure to 0.03 MPa, the nozzle opening enlarges, expelling foreign objects. The design aligns the axis of the nozzle body with the axis of the spray, making multiple arrangements easy. 【Features】 ○ Generates a fan-shaped spray with Yamagata flow distribution ○ Spray pattern that is strong in the center and gradually weakens towards both ends ○ Structure that opens the nozzle when spray pressure is lowered, expelling foreign objects ○ Design that aligns the axis of the nozzle body with the axis of the spray ○ Easy to arrange multiple nozzles For more details, please contact us or download the catalog.

  • Water Treatment
  • Water and sewerage pipe fittings

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
2-fluid nozzle "Full Cone Nozzle JOKIJet"

2-fluid nozzle "Full Cone Nozzle JOKIJet"

Low running costs! Two-fluid filling cone nozzle using steam instead of compressed air.

The "JOKIJet Conical Nozzle" is a two-fluid conical nozzle composed of multiple parts such as the nozzle body, adapter, O-ring, and flange, using steam instead of compressed air. It features external mixing, where compressed air and liquid are mixed outside the nozzle for atomization. It is a liquid pressurization type that supplies pressurized liquid to the two-fluid nozzle. Due to its steam specification, it can be used at low running costs in factories with boiler facilities. 【Features】 ○ Steam-driven nozzle ○ Two-fluid conical nozzle ○ Available at low running costs ○ External mixing type ○ Liquid pressurization type For more details, please contact us or download the catalog.

  • Water and sewerage pipe fittings

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Integrated standard fan-shaped nozzle "Yamagata distribution nozzle VVP"

Integrated standard fan-shaped nozzle "Yamagata distribution nozzle VVP"

All-metal or all-plastic! A simple integrated nozzle that generates a fan-shaped spray.

The "Yamagata Distribution Nozzle VVP" can generate a fan-shaped spray with a Y-shaped flow distribution that is strong in the center and gradually weakens towards both ends. When using multiple nozzles in an array, overlapping the patterns at both ends results in an even flow distribution across the entire width. It is a simple integrated nozzle made of all metal or all resin, which is directly screwed into the pipe. A strainer (available only for metal body products) is standard equipment for small flow products and can also be removed. 【Features】 ○ Yamagata distribution nozzle ○ Simple integrated nozzle ○ Made of all metal or all resin ○ Even flow distribution across the entire width ○ Strainer is standard equipment for small flow products For more details, please contact us or download the catalog.

  • Aggregates and crushed stone
  • Water and sewerage pipe fittings
  • Roof and gutter construction

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
2-fluid nozzle "Fan-shaped nozzle VVP+AS"

2-fluid nozzle "Fan-shaped nozzle VVP+AS"

Built-in check valve on the air side! Mist fan-shaped nozzle usable for both 1 and 2 fluid specifications.

The "Fan-Shaped Nozzle VVP+AS" is a fog fan-shaped nozzle composed of multiple parts including the nozzle body, adapter, air socket, and check valve, and can be used in both single-fluid and dual-fluid configurations. It features an internal mixing design that atomizes by mixing compressed air and liquid inside the nozzle. A check valve is built into the air side, allowing it to be used as a single-fluid nozzle in the medium to high water flow range and as a dual-fluid nozzle in the low water flow range. It is a liquid pressurization type that supplies liquid to the dual-fluid nozzle. 【Features】 - Usable in both single-fluid and dual-fluid configurations - Single-fluid in medium to high water flow range, dual-fluid in low water flow range - Wide turn-down ratio (throttle ratio) of 1:20 - Suitable for use in environments with minimal variation in flow distribution and spray angle - Built-in check valve on the air side For more details, please contact us or download the catalog.

  • Water and sewerage pipe fittings

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
2-fluid nozzle "Fan-shaped nozzle DDRP+AS"

2-fluid nozzle "Fan-shaped nozzle DDRP+AS"

Compatible with multi-variety production! Mist fan-shaped nozzle usable with both 1st and 2nd fluid specifications.

The "Fan-Shaped Nozzle DDRP+AS" is a fog fan-shaped nozzle composed of multiple parts including the nozzle body, adapter, air socket, and check valve, and can be used in both single-fluid and dual-fluid configurations. It features an internal mixing design that atomizes by mixing compressed air and liquid inside the nozzle. A check valve is built into the air side, allowing it to be used as a single-fluid nozzle in medium to high water flow ranges and as a dual-fluid nozzle in low water flow ranges. It is a liquid pressurization type that supplies liquid to the dual-fluid nozzle. 【Features】 - Usable in both single-fluid and dual-fluid configurations - Single-fluid in medium to high water flow ranges, dual-fluid in low water flow ranges - Wide turn-down ratio (throttle ratio) of 1:20 - Suitable for use in environments with minimal variation in flow distribution and spray angle - Spray pattern thickness angle of 60°, allowing for surface cooling For more details, please contact us or download the catalog.

  • Water and sewerage pipe fittings

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Conical nozzle "Uniform distribution nozzle / Standard alumina type JUXP-AL92"

Conical nozzle "Uniform distribution nozzle / Standard alumina type JUXP-AL92"

Standard alumina type! Circular spray pattern with uniform flow distribution conical nozzle.

The "Uniform Distribution Nozzle / Standard Alumina Type JUXP-AL92" is a conical nozzle with a circular spray pattern and uniform flow distribution. It is a nozzle with a body and whirler that are sintered as a single unit, using an X-shaped whirler for the spinner. It has a large foreign object passage diameter, making it less prone to clogging. The section from the whirler to the tip is made of high-purity alumina ceramic, providing excellent wear resistance. It is available in medium to large spray volumes. 【Features】 ○ Circular spray pattern with uniform flow distribution ○ Excellent wear resistance ○ Structure that is less prone to clogging ○ Made of alumina ceramic ○ Available in medium to large spray volumes For more details, please contact us or download the catalog.

  • Water and sewerage pipe fittings

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Integrated standard fan-shaped nozzle "Yamagata distribution nozzle UVVP"

Integrated standard fan-shaped nozzle "Yamagata distribution nozzle UVVP"

Achieving long lifespan! A simple integrated nozzle that is directly screwed into the pipe body.

The "Yamagata Distribution Nozzle UVVP" can generate a fan-shaped spray with a Yamagata flow distribution that is strong in the center and gradually weakens towards both ends. It uses ultra-high molecular weight polyethylene material, which has excellent wear resistance. Its unique structure ensures a long lifespan, providing stable performance as a spray polishing nozzle for extended periods. This is a simple integrated nozzle that is directly screwed into the pipe body, making it ideal for use in industries such as machinery and electrical electronics. 【Features】 ○ Yamagata distribution nozzle ○ Simple integrated nozzle ○ Made of ultra-high molecular weight polyethylene ○ Long lifespan achieved through unique structure ○ Stable performance as a spray polishing nozzle For more details, please contact us or download the catalog.

  • Water and sewerage pipe fittings

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Coin-shaped standard fan nozzle "Yamagata distribution nozzle (thin type) CVVP"

Coin-shaped standard fan nozzle "Yamagata distribution nozzle (thin type) CVVP"

A nozzle with a mountain-shaped distribution pattern of spray that is strong in the center and gradually weakens towards both ends.

The "Wedge-Shaped Distribution Nozzle (Thin Type) CVVP" can generate a fan-shaped spray with a wedge-shaped flow distribution that is strong in the center and gradually weakens towards both ends. The material is S303 or S316. It has a fully threaded outer circumference for embedding into wall surfaces as a one-piece structure. The nozzle is designed to be extremely thin in thickness, resembling a coin. Even when screwed into a shower pipe, it does not protrude from the outer surface of the pipe, making nozzle arrangement in tight spaces easy. 【Features】 ○ Wedge-shaped distribution nozzle (thin type) ○ Spray pattern that is strong in the center and gradually weakens towards both ends ○ Coin-shaped with an extremely thin nozzle thickness ○ Easy nozzle arrangement in tight spaces ○ One-piece structure that can be embedded into wall surfaces For more details, please contact us or download the catalog.

  • Water and sewerage pipe fittings

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Sector Nozzle "Uniform Distribution Nozzle (High Turn Down) VVEP-HL"

Sector Nozzle "Uniform Distribution Nozzle (High Turn Down) VVEP-HL"

Maintains minimal spray angle variation and uniform spraying! High turndown 1 fluid uniform fan-shaped nozzle.

The "Uniform Distribution Nozzle (High Turn Down) VVEP-HL" is a high turn down single fluid uniform fan nozzle that maintains a consistent spray even with changes in pressure, resulting in minimal variation in spray angle. It is particularly effective for applications requiring precise control at low flow rates. With a large adjustment range for flow rate (turn down ratio), it is ideal for applications where the flow rate needs to be increased or decreased based on the target. It features a spray pattern with uniform flow distribution across the entire area and is designed to be controllable at low flow rates. 【Features】 - High turn down single fluid uniform fan nozzle - Spray pattern with uniform flow distribution across the entire area - Minimal variation in spray angle when changing spray pressure - Structure that allows control at low flow rates - Suitable for applications that require adjustment of spray flow rate For more details, please contact us or download the catalog.

  • Water and sewerage pipe fittings

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Hollow Cone Nozzle "Uniform Distribution Nozzle (Low Flow Spray / Disassemblable) K"

Hollow Cone Nozzle "Uniform Distribution Nozzle (Low Flow Spray / Disassemblable) K"

Capable of generating fine mist! Spray pattern with a circular small flow rate conical nozzle.

The "Uniform Distribution Nozzle (Low Flow Spray / Disassemblable) K" is a small flow conical nozzle capable of generating fine mist with a ring-shaped spray pattern. It uses ceramic for the spray tip and closer, and the entire section from the swirl chamber to the nozzle is made of ceramic, providing excellent wear resistance. All models come standard with a strainer, making it ideal for use in industries such as pollution control, machinery, electrical and electronics, paper, pulp, printing, and food. 【Features】 ○ Small flow conical nozzle ○ Ring-shaped spray pattern ○ Ceramic formation from the swirl chamber to the nozzle ○ Excellent wear resistance ○ Capable of generating fine mist For more details, please contact us or download the catalog.

  • Water and sewerage pipe fittings
  • Unit and other construction

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Hollow Cone Nozzle "Uniform Distribution Nozzle (Medium Spray Alumina Type) AP-AL92"

Hollow Cone Nozzle "Uniform Distribution Nozzle (Medium Spray Alumina Type) AP-AL92"

Hard to clog! The entire nozzle is made of alumina ceramic with a hollow conical shape.

The "Uniform Distribution Nozzle (Medium Spray Volume Alumina Type) AP-AL92" is a hollow cone nozzle that can generate a hollow cone spray with a relatively fine particle diameter in an annular spray pattern. The entire nozzle is made of alumina ceramic and is an angle-type hollow cone nozzle that sprays at a right angle to the direction of flow. The spray is stable regardless of liquid pressure, and both the inlet and outlet have a structure that is less prone to clogging with a single hole. 【Features】 ○ The entire nozzle is made of alumina ceramic hollow cone nozzle ○ Stable spraying regardless of liquid pressure ○ Generates a hollow cone spray with a relatively fine particle diameter in an annular spray pattern ○ Less prone to clogging with a single hole at both the inlet and outlet ○ Sprays at a right angle to the direction of flow For more details, please contact us or download the catalog.

  • Water and sewerage pipe fittings
  • Roof and gutter construction

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
1 Fluid Nozzle (Straight) "Straight Nozzle (with Control Mechanism) SO-CM"

1 Fluid Nozzle (Straight) "Straight Nozzle (with Control Mechanism) SO-CM"

Difficult to drop the ball! A straight nozzle that generates a strong hitting power with ultra-thin rod flow.

The "Straight Nozzle (with Control Mechanism) SO-CM" is a straight nozzle that generates a strong impact with a fine, straight spray pattern. It is designed to minimize droplet fall and allows for responsive control. The internal piston moves up and down with controlled air, enabling the ON/OFF function of the spray. It is ideal for applications such as trimming paper and asbestos slate, cutting wood and food, localized cleaning of precision machine parts, liquid injection, deburring, and seasoning. 【Features】 - Fine, straight spray pattern - Generates a strong impact with a fine straight flow - ON/OFF spray control with controlled air - High responsiveness in spray control - Minimizes droplet fall For more details, please contact us or download the catalog.

  • Water and sewerage pipe fittings
  • stone

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
1 Fluid Nozzle (Straight) "Straight Nozzle (Self-Cleaning Type) MOMOJet 'C'"

1 Fluid Nozzle (Straight) "Straight Nozzle (Self-Cleaning Type) MOMOJet 'C'"

Equipped with an automatic cleaning mechanism! A straight nozzle with a built-in spring that generates a strong impact flow.

The "Straight Nozzle (Self-Cleaning) MOMOJet 'C'" is a straight nozzle that generates a strong impact stream with a narrow, straight spray pattern. It has a cleaning mechanism built into the nozzle body, allowing for self-cleaning and normal spraying when foreign objects clog the nozzle tip. By reducing the spray pressure to 0.03 MPa, the nozzle tip opens widely to expel foreign objects. The design aligns the axis of the nozzle body with the axis of the spray, making it easy to arrange multiple nozzles. 【Features】 ○ Narrow, straight spray pattern ○ Straight nozzle that generates a strong impact stream ○ Cleaning mechanism built into the nozzle body ○ When spray pressure is reduced, the nozzle tip automatically opens to expel foreign objects ○ Built-in spring For more details, please contact us or download the catalog.

  • Water Treatment
  • Water and sewerage pipe fittings

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Search Keywords Related to nozzle

COPYRIGHT © 2001-2025 IPROS CORPORATION ALL RIGHTS RESERVED.