nozzle(3m) - メーカー・企業と製品の一覧

nozzleの製品一覧

31～42 件を表示 ／ 全 42 件

表示件数
2-fluid nozzle "Fan-shaped nozzle VVP+AS"

2-fluid nozzle "Fan-shaped nozzle VVP+AS"

Built-in check valve on the air side! Mist fan-shaped nozzle usable for both 1 and 2 fluid specifications.

The "Fan-Shaped Nozzle VVP+AS" is a fog fan-shaped nozzle composed of multiple parts including the nozzle body, adapter, air socket, and check valve, and can be used in both single-fluid and dual-fluid configurations. It features an internal mixing design that atomizes by mixing compressed air and liquid inside the nozzle. A check valve is built into the air side, allowing it to be used as a single-fluid nozzle in the medium to high water flow range and as a dual-fluid nozzle in the low water flow range. It is a liquid pressurization type that supplies liquid to the dual-fluid nozzle. 【Features】 - Usable in both single-fluid and dual-fluid configurations - Single-fluid in medium to high water flow range, dual-fluid in low water flow range - Wide turn-down ratio (throttle ratio) of 1:20 - Suitable for use in environments with minimal variation in flow distribution and spray angle - Built-in check valve on the air side For more details, please contact us or download the catalog.

  • Water and sewerage pipe fittings

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
2-fluid nozzle "Fan-shaped nozzle DDRP+AS"

2-fluid nozzle "Fan-shaped nozzle DDRP+AS"

Compatible with multi-variety production! Mist fan-shaped nozzle usable with both 1st and 2nd fluid specifications.

The "Fan-Shaped Nozzle DDRP+AS" is a fog fan-shaped nozzle composed of multiple parts including the nozzle body, adapter, air socket, and check valve, and can be used in both single-fluid and dual-fluid configurations. It features an internal mixing design that atomizes by mixing compressed air and liquid inside the nozzle. A check valve is built into the air side, allowing it to be used as a single-fluid nozzle in medium to high water flow ranges and as a dual-fluid nozzle in low water flow ranges. It is a liquid pressurization type that supplies liquid to the dual-fluid nozzle. 【Features】 - Usable in both single-fluid and dual-fluid configurations - Single-fluid in medium to high water flow ranges, dual-fluid in low water flow ranges - Wide turn-down ratio (throttle ratio) of 1:20 - Suitable for use in environments with minimal variation in flow distribution and spray angle - Spray pattern thickness angle of 60°, allowing for surface cooling For more details, please contact us or download the catalog.

  • Water and sewerage pipe fittings

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Uniform Distribution Nozzle (Clogging Prevention Type) AJP

Uniform Distribution Nozzle (Clogging Prevention Type) AJP

Clogging prevention! A full cone nozzle with a circular spray pattern for uniform flow distribution.

The "Uniform Distribution Nozzle (Clogging Prevention Type) AJP" is a conical nozzle with a circular spray pattern and uniform flow distribution. It is a new concept product that atomizes without using a swirler. Because there is no swirler, the structure has a very large foreign object passage diameter, making it difficult to clog. It sprays at a right angle to the inflow direction. We offer injection-molded products made of polyphenylene sulfide (PPS) suitable for spraying chemical solutions such as hydrochloric acid. 【Features】 ○ Circular spray pattern with uniform flow distribution ○ Structure with a large foreign object passage diameter, making it difficult to clog ○ Angle type that sprays at a right angle to the inflow direction ○ Composed of two parts: the main body and the cap ○ The orifice cap is screw-in type For more details, please contact us or download the catalog.

  • Water and sewerage pipe fittings

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
2-fluid nozzle "Full cone nozzle (small spray / compact) SCBIMJ"

2-fluid nozzle "Full cone nozzle (small spray / compact) SCBIMJ"

Super compact type! A small spray conical nozzle with a wide flow adjustment range.

The "Charging Cone Nozzle (Small Amount Spray / Ultra Compact) SCBIMJ" consists of four parts: nozzle tip, core, cap, and adapter, and is a two-fluid charging cone nozzle that generates a fine mist with an average particle diameter of less than 100μm. It is an internal mixing type that atomizes by mixing compressed air and liquid inside the nozzle. (Compressed air flows in the center of the nozzle, while liquid flows around the outer perimeter in an internal mixing air type.) It is a liquid pressurization type that supplies liquid to the two-fluid nozzle under pressure. 【Features】 ○ Circular spray pattern with uniform flow distribution ○ Minimum spray flow rate among two fluids ○ Ultra-compact shape with a total length of about 42mm ○ ON-OFF control function included ○ Liquid pressurization type that sprays at a pressure of approximately 0.1 to 0.3 MPa For more details, please contact us or download the catalog.

  • Water and sewerage pipe fittings

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Integrated standard fan-shaped nozzle "Yamagata distribution nozzle VP"

Integrated standard fan-shaped nozzle "Yamagata distribution nozzle VP"

Ceramic nozzle! A simple integrated nozzle that generates a fan-shaped spray.

The "Yamagata Distribution Nozzle VP" can generate a fan-shaped spray with a Y-shaped flow distribution that is strong in the center and gradually weakens towards both ends. When using multiple nozzles in an array, overlapping the patterns at both ends results in an even flow distribution across the entire width. The nozzle body features a ceramic nozzle tip and is a simple integrated nozzle that is directly screwed into the pipe body. A strainer (available only for metal body products) is standard equipment for small flow models and can also be removed. 【Features】 ○ Ceramic is used in the nozzle body’s tip ○ Simple integrated nozzle ○ Strainer is standard equipment for small flow models and can be removed ○ The spray tip is made of ceramic and resin → The ceramic nozzle is molded with a durable engineering plastic For more details, please contact us or download the catalog.

  • Aggregates and crushed stone
  • Water and sewerage pipe fittings
  • Roof and gutter construction

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
2-fluid nozzle "Fan-shaped nozzle (small amount spray / ultra-compact) SCBIMV"

2-fluid nozzle "Fan-shaped nozzle (small amount spray / ultra-compact) SCBIMV"

Super compact type! A small spray fan nozzle with a wide flow adjustment range.

The "Fan-Shaped Nozzle (Small Amount Spray / Ultra Compact) SCBIMV" consists of four components: nozzle tip, core, cap, and adapter, and is a two-fluid fan-shaped nozzle that generates a fine mist with an average particle diameter of less than 100μm. It is an internal mixing type that atomizes by mixing compressed air and liquid inside the nozzle. (Compressed air flows in the center of the nozzle, while liquid flows around the outer circumference in an internal mixing air type.) It is a liquid pressurization type that supplies pressurized liquid to the two-fluid nozzle. 【Features】 ○ Switchable between two spray patterns: uniform & triangular distribution ○ Minimum spray flow rate among two-fluid systems ○ Wide flow adjustment range ○ Ultra compact type with a total length of approximately 42mm ○ Equipped with ON-OFF control function For more details, please contact us or download the catalog.

  • Water and sewerage pipe fittings

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Air Nozzle "Fan-Shaped Nozzle (Disassemblable) VZ"

Air Nozzle "Fan-Shaped Nozzle (Disassemblable) VZ"

Steam injection is also possible! An air nozzle that accommodates various injection amounts with chip replacement.

The "Fan-Shaped Nozzle (Disassemblable) VZ" is an air nozzle composed of three parts: a spray tip, a cap, and an adapter. Only the worn spray tip can be replaced, while the cap and adapter are compatible with standard fan-shaped nozzles (for liquids) in three sets. It is capable of spraying not only air but also steam. It is used in industries such as steel, machinery, electronics, paper, pulp, printing, food, and transportation. 【Features】 ○ Compressor specification ○ Wide-angle spray (spray angle 90°) covers a large area ○ Various spray volumes can be accommodated by replacing the tip ○ Steam spraying is also possible ○ Disassemblable type, made of metal For more details, please contact us or download the catalog.

  • Water and sewerage pipe fittings

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Three-group standard fan-shaped nozzle "Yamagata distribution nozzle (disassemblable) V"

Three-group standard fan-shaped nozzle "Yamagata distribution nozzle (disassemblable) V"

Ceramic three-group shape! Disassemblable serrated distribution nozzle that generates a fan-shaped spray.

The "Yamagata Distribution Nozzle V" can generate a fan-shaped spray with a Y-shaped flow distribution that is strong in the center and gradually weakens towards both ends. When overlapping the patterns at both ends during multiple nozzle arrangements, the flow distribution becomes uniform across the entire width. This nozzle consists of three parts: a spray chip, a cap, and an adapter, and only the worn spray chip can be replaced. 【Features】 ○ Disassemblable Yamagata distribution nozzle ○ Ceramic used in the spray chip nozzle section ○ Strainer is standard on small flow products and can be removed ○ The cell team consists of ceramic and resin spray chips → The ceramic nozzle is molded with a robust engineering plastic For more details, please contact us or download the catalog.

  • Aggregates and crushed stone
  • Water and sewerage pipe fittings
  • Roof and gutter construction

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Uniform Sector Nozzle "Uniform Distribution Nozzle VEP"

Uniform Sector Nozzle "Uniform Distribution Nozzle VEP"

Ceramic integrated nozzle! Sector nozzle with uniform flow distribution spray pattern.

The "Uniform Distribution Nozzle VEP" is a uniform fan-shaped nozzle that generates a fan spray with an even flow distribution across the entire spray pattern. The impact force per unit area is uniform. It is an integrated nozzle that uses ceramic in the spray tip. The Seltim is a ceramic-resin spray tip molded from a robust engineering plastic. It is ideal for use in industries such as steel, machinery, electrical and electronics, printing, food, and vehicles and transportation. 【Features】 ○ Generates a fan spray with uniform flow distribution ○ Spray pattern with uniform flow distribution across the entire area ○ Integrated nozzle that uses ceramic in the nozzle tip ○ Uniform impact force per unit area ○ Seltim is a ceramic-resin spray tip For more details, please contact us or download the catalog.

  • Aggregates and crushed stone
  • Water and sewerage pipe fittings
  • Roof and gutter construction

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
2-fluid nozzle "Fan-shaped nozzle (small amount spray) CBIMV"

2-fluid nozzle "Fan-shaped nozzle (small amount spray) CBIMV"

Small spray type! A two-fluid fan-shaped nozzle that generates a fine mist with an average particle diameter of 100μm or less.

The "Fan-Shaped Nozzle (Small Amount Spray) CBIMV" is a mist generation nozzle that can switch between two spray patterns: uniform and triangular distribution. It is a two-fluid fan-shaped nozzle that generates mist with an average particle diameter of less than 100μm. It is a liquid pressurization type that sprays at a pressure of approximately 0.1 to 0.3 MPa. It can produce two patterns: a uniform flow distribution across the entire area and a triangular distribution that is strong in the center and gradually weakens towards the ends, offering a wide range of flow adjustment. 【Features】 ○ Switchable between uniform and triangular distribution, two spray patterns ○ Minimum spray flow in two fluids ○ Compact type ○ Structure resistant to clogging ○ Spray angles of 45°, 80°, and 110° For more details, please contact us or download the catalog.

  • Water and sewerage pipe fittings

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
2-fluid nozzle "Fan-shaped nozzle (small amount spray) CBIMV.S"

2-fluid nozzle "Fan-shaped nozzle (small amount spray) CBIMV.S"

Small spray type! A two-fluid fan-shaped nozzle that generates a fine mist with an average particle diameter of 30μm or less.

The "Fan-Shaped Nozzle (Small Amount Spray) CBIMV.S" is a space-saving, high-performance nozzle designed compactly from the BIM series of mist generation nozzles. It is a two-fluid fan-shaped nozzle that generates a fine mist with an average particle diameter of 30μm or less. It is a suction type that does not require a liquid pressurization device, as it uses compressed air to draw up the liquid and spray it. The two-fluid nozzle consists of four parts: a nozzle tip, core, cap, and adapter, providing an even flow distribution across the entire area. 【Features】 ○ Two-fluid fan-shaped nozzle that generates a fine mist with an average particle diameter of 30μm or less ○ Even spray pattern with uniform flow across the entire area ○ No device required for liquid pressurization ○ Compact type ○ Spray angle of 80° For more details, please contact us or download the catalog.

  • Water and sewerage pipe fittings

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Uniform Sector Nozzle "Uniform Distribution Nozzle VE"

Uniform Sector Nozzle "Uniform Distribution Nozzle VE"

Replaceable nozzle! Sector-shaped nozzle that generates a uniform flow distribution in a fan-shaped spray.

The "Uniform Distribution Nozzle VE" is a uniform sector nozzle that generates a fan-shaped spray with an even flow distribution across the entire spray pattern. The impact force per unit area is uniform. It is a three-part nozzle that uses ceramic in the spray tip nozzle section. It consists of a spray tip, cap, and adapter, allowing for the replacement of only the worn spray tip. The strainer is standard equipment for small spray volume products and is removable. 【Features】 ○ Generates a fan-shaped spray with an even flow distribution ○ Spray pattern with uniform flow distribution across the entire area ○ Replaceable nozzle section when worn ○ Uniform impact force per unit area ○ Strainer is standard equipment for small spray volume products and is removable For more details, please contact us or download the catalog.

  • Aggregates and crushed stone
  • Water and sewerage pipe fittings
  • Roof and gutter construction

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

nozzleに関連する検索キーワード

COPYRIGHT © 2001-2025 IPROS CORPORATION ALL RIGHTS RESERVED.