nozzle(20) - List of Manufacturers, Suppliers, Companies and Products

nozzle Product List

46～60 item / All 61 items

Displayed results
2-fluid nozzle "Charging Cone Nozzle JJA"

2-fluid nozzle "Charging Cone Nozzle JJA"

Fine mist and medium mist generated! A two-fluid spray cone nozzle with a simple structure that is easy to maintain.

The "Charging Cone Nozzle JJA" consists of multiple components including the nozzle body, mixing adapter, liquid pipe, and flange, and is a large flow two-fluid charging cone nozzle that generates fine mist and medium mist with an average particle diameter of 130μm or more. It features an internal mixing design that atomizes by mixing compressed air and liquid inside the nozzle. (It is a pre-mixing type that mixes liquid and compressed air within the nozzle adapter.) It is a liquid pressurization type that supplies pressurized liquid to the two-fluid nozzle. 【Features】 ○ Uniform particle diameter across the entire range ○ Wide adjustment range for spray flow rate ○ Large foreign object passage diameter, making it less prone to clogging ○ Wastewater combustion in waste incineration plants ○ Easy maintenance due to its simple structure For more details, please contact us or download the catalog.

  • Water and sewerage pipe fittings

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Hollow Cone Nozzle "Uniform Distribution Nozzle (Medium Spray) AAP"

Hollow Cone Nozzle "Uniform Distribution Nozzle (Medium Spray) AAP"

Clog-resistant! Spray pattern with a circular medium flow type hollow cone nozzle.

The "Uniform Distribution Nozzle (Medium Spray) AAP" is a hollow cone nozzle that can generate a hollow cone spray with a relatively fine particle diameter in an annular spray pattern. It can spray stably regardless of liquid pressure. The nozzle consists of two parts: the main body and the orifice cap, both designed with a single hole structure that is resistant to clogging at the inlet and outlet. The orifice cap is screw-on and removable. It is an angle type that sprays at a right angle to the direction of flow. 【Features】 ○ Medium flow rate hollow cone nozzle ○ Stable spraying regardless of liquid pressure ○ Annular spray pattern ○ Clog-resistant structure ○ Angle type that sprays at a right angle to the direction of flow For more details, please contact us or download the catalog.

  • Water and sewerage pipe fittings
  • Roof and gutter construction

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Uniform Distribution Nozzle (Small Amount Spray) J

Uniform Distribution Nozzle (Small Amount Spray) J

Minimum spray flow rate! Full cone nozzle with uniform flow distribution in a circular spray pattern.

The "Uniform Distribution Nozzle (Small Amount Spray) J" is a full cone nozzle with a circular spray pattern and an even flow distribution. It has the smallest spray flow rate among full cone nozzles. This innovative full cone nozzle atomizes through collision inflow. All models come standard with a strainer, and all parts are disassemblable. The spray tip nozzle and closer are made of ceramic, providing excellent wear resistance. 【Features】 ○ Circular spray pattern with uniform flow distribution ○ Smallest spray flow rate among full cone nozzles ○ Atomization through collision inflow ○ Excellent wear resistance ○ Ceramic used in spray tip nozzle and closer For more details, please contact us or download the catalog.

  • Water and sewerage pipe fittings

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
1 Fluid Nozzle (Others) "In-liquid Injection Nozzle (for Liquid Agitation) EJX High Flow Rate"

1 Fluid Nozzle (Others) "In-liquid Injection Nozzle (for Liquid Agitation) EJX High Flow Rate"

Simple structure! A high-speed nozzle with approximately 1.5 to 2 times the striking power of EJX.

The "Liquid Injection Nozzle (for Liquid Agitation) EJX High Flow Rate" is a nozzle that creates a negative pressure inside when liquid is injected, drawing in surrounding liquid and discharging 3 to 4 times the amount of supplied liquid. It is a high flow rate type with approximately 1.5 to 2 times the impact force (flow rate) of the EJX (Liquid Injection Nozzle). It features a simple structure and a compact, lightweight design. The standard pressure is 0.1 MPa. It is ideal for applications such as preventing sedimentation, resolving concentration differences, liquid agitation, in-liquid cleaning, in-liquid etching, and promoting plating. 【Features】 ○ Used in liquid ○ Draws in surrounding liquid and discharges 3 to 4 times the amount of supplied liquid ○ Simple and compact shape ○ Compact and lightweight design ○ High flow rate type with approximately 1.5 to 2 times the impact force of EJX For more details, please contact us or download the catalog.

  • Water and sewerage pipe fittings

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Equal segment fan-shaped nozzle "Eccentric Equal Distribution Nozzle OVVEP"

Equal segment fan-shaped nozzle "Eccentric Equal Distribution Nozzle OVVEP"

Metal one-piece! A semi-fan nozzle that generates an eccentric fan-shaped spray from the nozzle axis.

The "Eccentric Uniform Distribution Nozzle OVVEP" generates an eccentric fan-shaped spray from the nozzle axis, allowing for an even flow distribution across the entire spray pattern. It eliminates spray liquid accumulation when multiple nozzles are arranged. This integrated type does not require diagonal mounting of the nozzle. The material is S303 or B (brass), and it is a fully metal integrated nozzle. It is ideal for use in industries such as steel, electronics, paper, pulp, printing, food, and agriculture, forestry, and fisheries. 【Features】 - Eccentric from the nozzle axis, with a spray pattern that provides uniform flow distribution across the entire area - Eliminates spray liquid accumulation when multiple nozzles are arranged - Integrated type that does not require diagonal mounting of the nozzle - Fully metal integrated nozzle - Material is S303 or B (brass) For more details, please contact us or download the catalog.

  • Water and sewerage pipe fittings

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Hollow Cone Nozzle "Uniform Distribution Nozzle (Low Flow Spray / Disassemblable) KD"

Hollow Cone Nozzle "Uniform Distribution Nozzle (Low Flow Spray / Disassemblable) KD"

Capable of generating fine mist! Spray pattern with three sets of small volume annular conical nozzles.

The "Uniform Distribution Nozzle (Low Flow Spray / Disassemblable) KD" is a small flow three-set hollow conical nozzle capable of generating fine mist with an annular spray pattern. It features a compact design that minimizes the overall length of the spray tip. The spray tip nozzle and closer are made of ceramic, and the entire section from the swirl chamber to the nozzle is formed from ceramic, providing excellent wear resistance. The strainer is standard equipment for low flow models and can be removed. 【Features】 ○ Hollow conical nozzle, low flow type ○ Small flow three-set hollow conical nozzle with an annular spray pattern ○ Capable of generating fine mist ○ Compact design ○ Excellent wear resistance For more details, please contact us or download the catalog.

  • Water and sewerage pipe fittings

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Air Nozzle "Straight Nozzle TAIFUJet TF-F24"

Air Nozzle "Straight Nozzle TAIFUJet TF-F24"

24mm wide type! A compact air nozzle that excels in impact resistance and quietness.

The "Straight Nozzle TAIFUJet TF-F24" is a compact air nozzle with a spray width of 24mm. It features a width of 24mm, an overall length of 30mm, and a hole diameter of φ1.0mm, excelling in impact force and quietness. It can be installed in narrow spaces where conventional nozzles could not be mounted, allowing for air blowing in every corner. It is ideal for applications such as removing chips, removing paint dust, blowing away defective products, and pinpoint cooling of resin molded products. 【Features】 ○ Spray width of 24mm ○ Excellent impact force ○ Excellent quietness ○ Compact air nozzle ○ Compact flat nozzle For more details, please contact us or download the catalog.

  • Water and sewerage pipe fittings

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Air nozzle with amplification function "EJA Series"

Air nozzle with amplification function "EJA Series"

For air blow powder transport and more! Demonstrates strong air blowing power with a small amount of air.

The "EJA Series" is an air nozzle that boasts strong air blowing power with a small amount of air, thanks to its air amplification feature. It comes with a scale for air volume adjustment, allowing for the regulation of the injected air flow and suction amount. It is made entirely of stainless steel, considering durability. 【Features】 ■ Draws in surrounding air and amplifies it tenfold for injection (1/4FEJA300) ■ Flow adjustment is possible with the air volume adjustment scale ■ Made of all stainless steel *For more details, please refer to the catalog or feel free to contact us.

  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Three-group standard fan-shaped nozzle "Yamagata distribution nozzle (disassemblable) VV"

Three-group standard fan-shaped nozzle "Yamagata distribution nozzle (disassemblable) VV"

All-metal three-piece design! Disassemblable serrated distribution nozzle that generates a fan-shaped spray.

The "Yamagata Distribution Nozzle VV" can generate a fan-shaped spray with a flow distribution that is strong in the center and gradually weakens towards both ends. When overlapping the patterns at both ends during multiple nozzle arrangements, the flow distribution becomes uniform across the entire width. It is a fully metallic three-part nozzle consisting of a spray tip, cap, and adapter, allowing only the worn spray tip to be replaced. The strainer is standard equipment for small spray products and is also removable. 【Features】 ○ Yamagata distribution nozzle ○ Disassemblable ○ Fully metallic three-part design ○ Uniform flow distribution across the entire width ○ Strainer is standard equipment for small spray products For more details, please contact us or download the catalog.

  • Aggregates and crushed stone
  • Water and sewerage pipe fittings
  • Roof and gutter construction

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Self-cleaning fan-shaped nozzle "Yamagata distribution nozzle (with self-cleaning mechanism) MOMOJet"

Self-cleaning fan-shaped nozzle "Yamagata distribution nozzle (with self-cleaning mechanism) MOMOJet"

Fan-shaped spray with Yamagata flow distribution! A fan-shaped nozzle with a cleaning mechanism in the nozzle body.

The "Yamagata Distribution Nozzle (with Self-Cleaning Mechanism) MOMOJet" can generate a fan-shaped spray with a Yamagata flow distribution, where the center is strong and gradually weakens towards both ends. The nozzle body has a cleaning mechanism that allows for self-cleaning when foreign objects clog the nozzle, enabling normal spraying. By reducing the spray pressure to 0.03 MPa, the nozzle opening enlarges, expelling foreign objects. The design aligns the axis of the nozzle body with the axis of the spray, making multiple arrangements easy. 【Features】 ○ Generates a fan-shaped spray with Yamagata flow distribution ○ Spray pattern that is strong in the center and gradually weakens towards both ends ○ Structure that opens the nozzle when spray pressure is lowered, expelling foreign objects ○ Design that aligns the axis of the nozzle body with the axis of the spray ○ Easy to arrange multiple nozzles For more details, please contact us or download the catalog.

  • Water Treatment
  • Water and sewerage pipe fittings

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Uniform Distribution Nozzle (Low Volume Spray) JJRP

Uniform Distribution Nozzle (Low Volume Spray) JJRP

Excellent chemical resistance! Full cone nozzle with a circular spray pattern for uniform flow distribution.

The "Uniform Distribution Nozzle (Small Spray) JJRP" is a small spray conical nozzle made of PTFE (polytetrafluoroethylene) with excellent chemical resistance, and the injection-molded part is made of PVDF (polyvinylidene fluoride). The PTFE nozzle consists of two parts: the nozzle body and an X-shaped wobbler, while the PVDF nozzle consists of the injection-molded nozzle body and an X-shaped wobbler. It is a one-piece nozzle with the wobbler press-fitted into the body. By adopting a specially shaped wobbler, it achieves a small spray volume and excellent flow distribution. 【Features】 ○ Small spray conical nozzle ○ Adoption of a specially shaped wobbler ○ Achieves small spray volume and excellent flow distribution ○ Made of PTFE (polytetrafluoroethylene) with excellent chemical resistance ○ Injection-molded part made of PVDF (polyvinylidene fluoride) For more details, please contact us or download the catalog.

  • Water and sewerage pipe fittings

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
First-class fluid nozzle "Charging Angle Cone Nozzle SSXP"

First-class fluid nozzle "Charging Angle Cone Nozzle SSXP"

Hard to clog! A right square spray pattern nozzle with uniform flow distribution.

The "Charging Cone Nozzle SSXP" features a square spray pattern and provides an even flow distribution. With a wide spray angle of 90° to 100°, it covers a large area. It resolves the "gap" issue that occurs when multiple rows of circular spray pattern charging cone nozzles are arranged. The nozzle consists of two parts: the nozzle body and an X-shaped wobbler, forming an integrated nozzle with the wobbler press-fitted into the body. The use of an X-shaped wobbler in the rotary element allows for a large foreign object passage diameter, making it less prone to clogging. 【Features】 ○ Even flow distribution with a square spray pattern ○ Wide spray angle of 90° to 100° ○ Structure with a large foreign object passage diameter, resistant to clogging ○ Composed of two parts: the nozzle body and the X-shaped wobbler ○ Integrated nozzle with the wobbler press-fitted into the body For more details, please contact us or download the catalog.

  • Water Treatment
  • Aggregates and crushed stone
  • Water and sewerage pipe fittings

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Uniform Distribution Nozzle (Clogging Prevention Type) AJP

Uniform Distribution Nozzle (Clogging Prevention Type) AJP

Clogging prevention! A full cone nozzle with a circular spray pattern for uniform flow distribution.

The "Uniform Distribution Nozzle (Clogging Prevention Type) AJP" is a conical nozzle with a circular spray pattern and uniform flow distribution. It is a new concept product that atomizes without using a swirler. Because there is no swirler, the structure has a very large foreign object passage diameter, making it difficult to clog. It sprays at a right angle to the inflow direction. We offer injection-molded products made of polyphenylene sulfide (PPS) suitable for spraying chemical solutions such as hydrochloric acid. 【Features】 ○ Circular spray pattern with uniform flow distribution ○ Structure with a large foreign object passage diameter, making it difficult to clog ○ Angle type that sprays at a right angle to the inflow direction ○ Composed of two parts: the main body and the cap ○ The orifice cap is screw-in type For more details, please contact us or download the catalog.

  • Water and sewerage pipe fittings

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Integrated standard fan-shaped nozzle "Yamagata distribution nozzle VVP"

Integrated standard fan-shaped nozzle "Yamagata distribution nozzle VVP"

All-metal or all-plastic! A simple integrated nozzle that generates a fan-shaped spray.

The "Yamagata Distribution Nozzle VVP" can generate a fan-shaped spray with a Y-shaped flow distribution that is strong in the center and gradually weakens towards both ends. When using multiple nozzles in an array, overlapping the patterns at both ends results in an even flow distribution across the entire width. It is a simple integrated nozzle made of all metal or all resin, which is directly screwed into the pipe. A strainer (available only for metal body products) is standard equipment for small flow products and can also be removed. 【Features】 ○ Yamagata distribution nozzle ○ Simple integrated nozzle ○ Made of all metal or all resin ○ Even flow distribution across the entire width ○ Strainer is standard equipment for small flow products For more details, please contact us or download the catalog.

  • Aggregates and crushed stone
  • Water and sewerage pipe fittings
  • Roof and gutter construction

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Air Nozzle "Fan-Shaped Nozzle (Disassemblable) VZ"

Air Nozzle "Fan-Shaped Nozzle (Disassemblable) VZ"

Steam injection is also possible! An air nozzle that accommodates various injection amounts with chip replacement.

The "Fan-Shaped Nozzle (Disassemblable) VZ" is an air nozzle composed of three parts: a spray tip, a cap, and an adapter. Only the worn spray tip can be replaced, while the cap and adapter are compatible with standard fan-shaped nozzles (for liquids) in three sets. It is capable of spraying not only air but also steam. It is used in industries such as steel, machinery, electronics, paper, pulp, printing, food, and transportation. 【Features】 ○ Compressor specification ○ Wide-angle spray (spray angle 90°) covers a large area ○ Various spray volumes can be accommodated by replacing the tip ○ Steam spraying is also possible ○ Disassemblable type, made of metal For more details, please contact us or download the catalog.

  • Water and sewerage pipe fittings

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Search Keywords Related to nozzle

COPYRIGHT © 2001-2025 IPROS CORPORATION ALL RIGHTS RESERVED.