nozzle(1mm) - List of Manufacturers, Suppliers, Companies and Products

Last Updated： Aggregation Period:Nov 05, 2025～Dec 02, 2025
This ranking is based on the number of page views on our site.

nozzle Product List

61～75 item / All 155 items

Displayed results
Multi-Channel Jet FL-600B (Air Nozzle)

Multi-Channel Jet FL-600B (Air Nozzle)

Best-selling Rehiller Co. air nozzle FL-600E's sister product, round type, offered in brass.

Rehira Multi-Channel Jet (Air Nozzle) Material: Brass Impact Force: 2.1N @ 0.2MPa Noise Level: 79 dB (A) @ 0.2MPa Flow Rate: 18N?/h @ 0.2MPa Maximum Operating Pressure: 1MPa Heat Resistance: 200℃ *Please refer to the catalog for mounting screws, dimensions, and spray width. = Features = - Quiet operation (compared to half-moon single-port nozzle (copper pipe and crushed): approximately 12 dB (A) reduction) - Low air consumption (approximately 30% reduction possible for the intended purpose) - Pressure loss within the air nozzle (approximately 6%) = Approval Standards = - OSHA (Occupational Safety and Health Administration [Noise])

  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Raku Trainer Side P-2(B)

Raku Trainer Side P-2(B)

The quality has significantly improved compared to the old strainer L-1! Available in four colors: Black (B), Matte Black (MB), Gray (G), and Light Gray (LG).

The aluminum die-cast produced by mold casting is lightweight and robust. By applying chemical treatment for surface preparation before painting and forming a skin, corrosion resistance and adhesion are improved. The acrylic baked coating offers excellent weather resistance and corrosion resistance. The lattice surface is designed with unevenness, making it difficult for foreign substances to adhere and allowing water to flow smoothly. The uniquely designed wave-shaped bottom provides excellent drainage. The reinforced plate spring is made of stainless steel SUS304, which is resistant to weather and corrosion. You can choose from four colors: Black (B), Matte Black (MB), Gray (G), and Light Gray (LG).

  • Waterproof tape, adhesive, drain, protective panel

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Raku Trainer Side P-2 (LG)

Raku Trainer Side P-2 (LG)

The quality has significantly improved compared to the old strainer L-1! Available in four colors: Black (B), Matte Black (MB), Gray (G), and Light Gray (LG).

The aluminum die-cast produced by mold casting is lightweight and robust. By applying chemical treatment for surface preparation before painting, corrosion resistance and adhesion are improved. The acrylic baked paint offers excellent weather resistance and corrosion resistance. The lattice surface is designed with unevenness, making it difficult for foreign substances to adhere and allowing water to flow smoothly. The uniquely designed wave-shaped bottom provides excellent drainage. The reinforced plate spring is made of stainless steel SUS304, which is resistant to weather and corrosion. Colors are available in four options: Black (B), Matte Black (MB), Gray (G), and Light Gray (LG).

  • Waterproof tape, adhesive, drain, protective panel

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Raku Trainer Side P-2(G)

Raku Trainer Side P-2(G)

The quality has significantly improved compared to the old strainer L-1! Available in four colors: Black (B), Matte Black (MB), Gray (G), and Light Gray (LG).

The aluminum die-cast produced by mold casting is lightweight and robust. By applying chemical treatment for surface preparation before painting, corrosion resistance and adhesion are improved. The acrylic baked paint offers excellent weather resistance and corrosion resistance. The lattice surface is designed with unevenness, making it difficult for foreign substances to adhere and allowing water to flow smoothly. The uniquely designed wave-shaped bottom provides excellent drainage. The reinforced plate spring is made of stainless steel SUS304, which is resistant to weather and corrosion. You can choose from four colors: Black (B), Matte Black (MB), Gray (G), and Light Gray (LG).

  • Waterproof tape, adhesive, drain, protective panel

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
1 Fluid Nozzle (Straight) "Porous Nozzle (2-Hole Type) 2CP"

1 Fluid Nozzle (Straight) "Porous Nozzle (2-Hole Type) 2CP"

Compact design! Multi-hole straight nozzle that generates multiple strong impact rod flows.

The "Multi-Hole Nozzle (2-Hole Type) 2CP" features a spray pattern where two narrow, straight streams generate multiple strong impact streams. It is a multi-hole straight nozzle with a compact design and an integrated nozzle made of ceramic at the nozzle tip. It is ideal for cleaning applications such as paper felts, screens, dandy rolls, machine parts, vehicles, bottles, and shipping boxes. It is used in industries such as paper, pulp, printing, food, and transportation. 【Features】 ○ Spray pattern with two narrow, straight streams ○ Straight nozzle that generates multiple strong impact streams ○ 2-hole type ○ Compact design ○ Integrated nozzle made of ceramic at the nozzle tip For more details, please contact us or download the catalog.

  • Water and sewerage pipe fittings

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
1 Fluid Nozzle (Straight) "Porous Nozzle (7 Hole Type) 7CP"

1 Fluid Nozzle (Straight) "Porous Nozzle (7 Hole Type) 7CP"

Compact design! A multi-hole straight nozzle that generates multiple strong impact rod flows.

The "Multi-Hole Nozzle (7-Hole Type) 7CP" is a multi-hole straight nozzle that generates multiple strong jet streams with a spray pattern where seven jet streams move straight and narrow. It features a compact design with an integrated nozzle made of ceramic at the nozzle tip. It is ideal for cleaning applications such as paper felts, screens, dandy rolls, machine parts, vehicles, bottles, and shipping boxes. It is used in industries such as paper, pulp, printing, food, and transportation. 【Features】 - Spray pattern with seven straight and narrow jet streams - Straight nozzle that generates multiple strong jet streams - 7-hole type - Compact design - Integrated nozzle made of ceramic at the nozzle tip For more details, please contact us or download the catalog.

  • Water and sewerage pipe fittings

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Stainless steel piping for mist nozzles (fine mist cooling) ≪Commonly known as: Easy Pipe≫

Stainless steel piping for mist nozzles (fine mist cooling) ≪Commonly known as: Easy Pipe≫

The mist nozzle (fine mist cooling nozzle) is here with three advantages: easy installation, time-saving, and durability!

Although I purchased a mist nozzle (fine mist cooling), it's quite difficult to install and position it with the tube... This Easy Pipe solves that problem. <<Maximum Features>> - No risk of cap falling off due to knurled finish! - Just turn it by hand! It greatly contributes to countermeasures against the scorching heat in summer and dryness in winter. It is often used for temperature and humidity management in plant cultivation and livestock facilities. Additionally, it is used not only in the agricultural market but also in the industrial market (food, semiconductors, paper manufacturing) for temperature and humidity control. A significant feature of the fine mist spray is that it can regulate temperature and humidity without wetting crops, livestock, or products. Isn't it quite a hassle to connect such an important nozzle with piping? With the Easy Pipe, connections are easy! It's sturdier than a tube and can be attached and detached easily.

  • Mist Generator

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Uniform Distribution Nozzle (Clogging Prevention Type) AJP

Uniform Distribution Nozzle (Clogging Prevention Type) AJP

Clogging prevention! A full cone nozzle with a circular spray pattern for uniform flow distribution.

The "Uniform Distribution Nozzle (Clogging Prevention Type) AJP" is a conical nozzle with a circular spray pattern and uniform flow distribution. It is a new concept product that atomizes without using a swirler. Because there is no swirler, the structure has a very large foreign object passage diameter, making it difficult to clog. It sprays at a right angle to the inflow direction. We offer injection-molded products made of polyphenylene sulfide (PPS) suitable for spraying chemical solutions such as hydrochloric acid. 【Features】 ○ Circular spray pattern with uniform flow distribution ○ Structure with a large foreign object passage diameter, making it difficult to clog ○ Angle type that sprays at a right angle to the inflow direction ○ Composed of two parts: the main body and the cap ○ The orifice cap is screw-in type For more details, please contact us or download the catalog.

  • Water and sewerage pipe fittings

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
2-fluid nozzle "Full Cone Nozzle (Large Spray) AKIJet(R)"

2-fluid nozzle "Full Cone Nozzle (Large Spray) AKIJet(R)"

Generates a homogeneous and ultra-fine mist! A two-fluid conical nozzle that produces fine mist and micro mist.

The "Full Cone Nozzle (Large Spray) AKIJet(R)" is a collision type nozzle that further collides atomized droplets created by internal mixing to achieve homogenization and atomization, generating fine mist and ultra-fine mist. It is a two-fluid full cone nozzle composed of multiple parts, including the nozzle body, adapter, and strainer. There are two types: a liquid pressurization type that supplies liquid to the two-fluid nozzle under pressure, and a suction type that draws liquid using compressed air to create a spray. 【Features】 - Generates ultra-fine mist through ultrasonic waves during collision - A two-fluid full cone nozzle that produces fine mist and ultra-fine mist - Capable of generating a homogeneous and fine mist - Suction type that does not require a pressurization device (can also be used with liquid pressurization) For more details, please contact us or download the catalog.

  • Water and sewerage pipe fittings

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
2-fluid nozzle "Fan-shaped nozzle DOVEA"

2-fluid nozzle "Fan-shaped nozzle DOVEA"

Fine mist and medium mist generated! A two-fluid fan-shaped nozzle with a large flow adjustment range and small spray angle variation.

The "Fan-Shaped Nozzle DOVEA" consists of four components: the nozzle body, pipe, mixing adapter, and liquid pipe. It is a high-flow two-fluid fan-shaped nozzle that generates fine mist with an average particle diameter of 50μm or more. It features internal mixing, where compressed air and liquid are mixed inside the nozzle for atomization (a pre-mix type that mixes liquid and compressed air within the nozzle adapter). The liquid is pressurized and supplied to the two-fluid nozzle, spraying at a pressure of approximately 0.07 to 0.7 MPa. 【Features】 ○ Uniform flow rate and particle size across the entire range ○ Wide adjustment range for spray flow rate with minimal spray angle variation ○ Large foreign object passage diameter, making it resistant to clogging ○ Uniform flow distribution, suitable for use in multiple arrangements ○ Spray angles of 55°, 70°, 95°, and 110° For more details, please contact us or download the catalog.

  • Water and sewerage pipe fittings

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
1 Fluid Nozzle (Straight) "Straight Nozzle (for Trimming) CMP-T"

1 Fluid Nozzle (Straight) "Straight Nozzle (for Trimming) CMP-T"

Ceramic nozzle! A trimming nozzle with striking power that pierces through!

The "Straight Nozzle (for Trimming) CMP-T" is a trimming nozzle that produces a narrow, straight spray pattern with strong impact and generates a clear, steady flow without turbulence. The nozzle, made with ceramic at the nozzle tip, consists of two parts: the nozzle and the strainer + adapter. Only the worn nozzle can be replaced. It can also be used for local cleaning of precision machine parts, chemical injection, deburring, and beer foaming. 【Features】 ○ Narrow, straight spray pattern ○ Ceramic nozzle tip ○ Strong impact that penetrates ○ Generates a clear, steady flow without turbulence ○ Only the worn nozzle can be replaced For more details, please contact us or download the catalog.

  • Water and sewerage pipe fittings

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Hollow Cone Nozzle "Uniform Distribution Nozzle (Large Spray / 2 Directions) TWAA"

Hollow Cone Nozzle "Uniform Distribution Nozzle (Large Spray / 2 Directions) TWAA"

A hollow cone nozzle that generates hollow cone spray patterns in two directions.

The "Uniform Distribution Nozzle (Large Spray / 2 Directions) TWAA" is a hollow cone nozzle capable of 2-directional (180° opposing) spraying, based on the TAA nozzle (slurry liquid spray nozzle). Since it sprays in two directions, it consolidates what used to require two nozzles into one, simplifying the equipment and saving maintenance time. Made entirely of ceramic, it is lightweight (less than half the weight of metal) and uses SiC (silicon carbide) which has excellent wear resistance. 【Features】 ○ Annular spray pattern ○ Structure resistant to clogging ○ Angle type that sprays perpendicular to the inflow direction ○ 2-directional spraying ○ Excellent wear resistance For more details, please contact us or download the catalog.

  • Water and sewerage pipe fittings

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
1 Fluid Nozzle (Straight) "Straight Nozzle (Standard) CCP"

1 Fluid Nozzle (Straight) "Straight Nozzle (Standard) CCP"

High spray flow! A straight nozzle that generates the strongest impact stream.

The "Straight Nozzle (Standard) CCP" is a straight nozzle that generates the strongest impact stream with a narrow, straight spray pattern. Its internal design minimizes liquid resistance, resulting in a spray flow rate that is significantly larger than other straight nozzles of the same nozzle diameter. It also features a structure that is less affected by internal turbulence. It is ideal for high-pressure cleaning of paper felts, screens, vehicles, chests, machinery, parts, and for trimming applications such as paper making and asbestos slate. 【Features】 ○ Narrow, straight spray pattern ○ Straight nozzle that generates the strongest impact stream ○ Internal design that minimizes liquid resistance ○ Achieves a very large spray flow rate ○ Structure resistant to internal turbulence For more details, please contact us or download the catalog.

  • Water and sewerage pipe fittings
  • stone

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
1 Fluid Nozzle (Straight) "Straight Nozzle (Standard) CP"

1 Fluid Nozzle (Straight) "Straight Nozzle (Standard) CP"

Excellent wear resistance! A straight nozzle that generates the strongest impact force stream.

The "Straight Nozzle (Standard) CP" is a straight nozzle that generates the strongest impact stream with a narrow, straight spray pattern. Its internal design minimizes liquid resistance, resulting in a spray flow rate that is significantly larger than other straight nozzles of the same nozzle diameter. It also has a structure that is less affected by internal turbulence. It is ideal for high-pressure cleaning of paper felts, screens, vehicles, chests, machinery, parts, and for trimming applications such as paper making and asbestos slate. 【Features】 ○ Excellent wear resistance ○ Generates the strongest impact stream with a straight nozzle ○ Internal design minimizes liquid resistance ○ Achieves a very large spray flow rate ○ Strong structure against internal turbulence For more details, please contact us or download the catalog.

  • Water and sewerage pipe fittings
  • stone

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
1 Fluid Nozzle (Straight) "Straight Nozzle (For Trimming) CM"

1 Fluid Nozzle (Straight) "Straight Nozzle (For Trimming) CM"

Ceramic nozzle! A trimming nozzle with an incredibly strong striking power.

The "Straight Nozzle (for Trimming) CM" is a trimming nozzle that generates a strong impact with a narrow, straight spray pattern, creating a clear, uninterrupted laminar flow. The nozzle, which has a sleeve (molded with high-purity ceramic nozzle and robust engineering plastic) pressed into the nozzle tip, consists of two parts: the nozzle and the strainer. It can also be used for local cleaning of precision machine parts, chemical injection, burr removal, and beer foaming. 【Features】 ○ Narrow, straight spray pattern ○ Ceramic nozzle tip ○ Strong impact that penetrates ○ Generates a clear, uninterrupted laminar flow ○ Composed of two parts: nozzle and strainer For more details, please contact us or download the catalog.

  • Water and sewerage pipe fittings

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Search Keywords Related to nozzle

COPYRIGHT © 2001-2025 IPROS CORPORATION ALL RIGHTS RESERVED.