nozzle(1mm) - メーカー・企業と製品の一覧

nozzleの製品一覧

46～60 件を表示 ／ 全 83 件

表示件数
Hollow Cone Nozzle "Uniform Distribution Nozzle (Medium Spray) AAP"

Hollow Cone Nozzle "Uniform Distribution Nozzle (Medium Spray) AAP"

Clog-resistant! Spray pattern with a circular medium flow type hollow cone nozzle.

The "Uniform Distribution Nozzle (Medium Spray) AAP" is a hollow cone nozzle that can generate a hollow cone spray with a relatively fine particle diameter in an annular spray pattern. It can spray stably regardless of liquid pressure. The nozzle consists of two parts: the main body and the orifice cap, both designed with a single hole structure that is resistant to clogging at the inlet and outlet. The orifice cap is screw-on and removable. It is an angle type that sprays at a right angle to the direction of flow. 【Features】 ○ Medium flow rate hollow cone nozzle ○ Stable spraying regardless of liquid pressure ○ Annular spray pattern ○ Clog-resistant structure ○ Angle type that sprays at a right angle to the direction of flow For more details, please contact us or download the catalog.

  • Water and sewerage pipe fittings
  • Roof and gutter construction

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Hollow Cone Nozzle "Uniform Distribution Nozzle (Large Flow Flange Type) TAA"

Hollow Cone Nozzle "Uniform Distribution Nozzle (Large Flow Flange Type) TAA"

Flange type for large spray! Lightweight conical nozzle with annular spray pattern.

The "Uniform Distribution Nozzle (High Flow Flange Type) TAA" is a hollow conical nozzle that generates an annular hollow conical spray with a stable spray pattern even at low pressure, thanks to its ideal swirl chamber design in an involute shape. It uses SiC (silicon carbide bonded silicon nitride) which has excellent wear resistance. The connection to the piping is made via flange fastening. Being made entirely of ceramic, it is lightweight (less than half that of metal). It is ideal for use in flue gas desulfurization absorption towers and for spraying slurry liquids. 【Features】 ○ Stable spraying possible even at low pressure with an involute shape ○ Generates an annular hollow conical spray pattern ○ Uses SiC with excellent wear resistance ○ Lightweight due to being made entirely of ceramic ○ Angle type that sprays at a right angle to the inflow direction For more details, please contact us or download the catalog.

  • Water and sewerage pipe fittings

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Uniform Distribution Nozzle (Standard Type) JJXP

Uniform Distribution Nozzle (Standard Type) JJXP

Difficult to clog! A conical nozzle with a circular spray pattern for uniform flow distribution.

The "Uniform Distribution Nozzle (Standard Type) JJXP" is a full cone nozzle with a circular spray pattern and uniform flow distribution. It consists of two parts: the nozzle body and an X-shaped whirler, forming an integrated nozzle with the whirler press-fitted into the body. The use of an X-shaped whirler in the swirler allows for a larger foreign object passage diameter, making it less prone to clogging. It is available in a series ranging from low to medium flow rates, with many variations in materials. 【Features】 - Circular spray pattern with uniform flow distribution - Structure that is less prone to clogging - Series available from low to medium flow rates - Many variations in materials available - X-shaped whirler used in the swirler For more details, please contact us or download the catalog.

  • Water Treatment
  • Aggregates and crushed stone
  • Water and sewerage pipe fittings

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
1 Fluid Nozzle (Others) "In-liquid Injection Nozzle (for Liquid Agitation) EJX High Flow Rate"

1 Fluid Nozzle (Others) "In-liquid Injection Nozzle (for Liquid Agitation) EJX High Flow Rate"

Simple structure! A high-speed nozzle with approximately 1.5 to 2 times the striking power of EJX.

The "Liquid Injection Nozzle (for Liquid Agitation) EJX High Flow Rate" is a nozzle that creates a negative pressure inside when liquid is injected, drawing in surrounding liquid and discharging 3 to 4 times the amount of supplied liquid. It is a high flow rate type with approximately 1.5 to 2 times the impact force (flow rate) of the EJX (Liquid Injection Nozzle). It features a simple structure and a compact, lightweight design. The standard pressure is 0.1 MPa. It is ideal for applications such as preventing sedimentation, resolving concentration differences, liquid agitation, in-liquid cleaning, in-liquid etching, and promoting plating. 【Features】 ○ Used in liquid ○ Draws in surrounding liquid and discharges 3 to 4 times the amount of supplied liquid ○ Simple and compact shape ○ Compact and lightweight design ○ High flow rate type with approximately 1.5 to 2 times the impact force of EJX For more details, please contact us or download the catalog.

  • Water and sewerage pipe fittings

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Hollow Cone Nozzle "Spillback Nozzle SPB"

Hollow Cone Nozzle "Spillback Nozzle SPB"

Massive generation of fine mist! Extremely low particle size variation air cone nozzle.

The "Spillback Nozzle SPB" is a variable flow conical nozzle (return nozzle) that produces a large amount of fine mist in a circular spray pattern. The spray flow rate can be adjusted by opening and closing the discharge valve while maintaining a constant supply water pressure, with the maximum spray flow rate at fully closed and the minimum at fully open. The turndown ratio of the spray flow rate (throttling ratio) is 1:10. The change in particle size between maximum and minimum spray flow rates is small, making it ideal for vapor cooling when the inlet gas temperature varies. 【Features】 ○ Circular spray pattern ○ Variable spray flow rate ○ Turndown ratio of 1:10 ○ Minimal change in particle size ○ Suitable for gas cooling with variations in flow rate and temperature For more details, please contact us or download the catalog.

  • Water and sewerage pipe fittings

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
2-fluid nozzle "Fan-shaped nozzle DOVVA-G"

2-fluid nozzle "Fan-shaped nozzle DOVVA-G"

Fine mist and medium mist generated! A two-fluid fan nozzle with a simple structure and excellent maintenance characteristics.

The "Fan-Shaped Nozzle DOVVA-G" is a high-flow two-fluid fan-shaped nozzle composed of multiple parts such as the nozzle body, pipe, and flange, capable of generating fine mist with an average particle diameter of 80μm or more. It features an internal mixing design that atomizes by mixing compressed air and liquid inside the nozzle. It is a liquid pressurization type that supplies pressurized liquid to the two-fluid nozzle. Its simple structure allows for easy maintenance. 【Features】 ○ High-flow two-fluid fan-shaped nozzle ○ Generates fine mist with an average particle diameter of 80μm or more ○ Excellent maintenance due to its simple structure ○ Large foreign object passage diameter, making it resistant to clogging ○ Suitable for applications such as wastewater and sewage spraying For more details, please contact us or download the catalog.

  • Water and sewerage pipe fittings

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Integrated standard fan-shaped nozzle "Yamagata distribution nozzle VP"

Integrated standard fan-shaped nozzle "Yamagata distribution nozzle VP"

Ceramic nozzle! A simple integrated nozzle that generates a fan-shaped spray.

The "Yamagata Distribution Nozzle VP" can generate a fan-shaped spray with a Y-shaped flow distribution that is strong in the center and gradually weakens towards both ends. When using multiple nozzles in an array, overlapping the patterns at both ends results in an even flow distribution across the entire width. The nozzle body features a ceramic nozzle tip and is a simple integrated nozzle that is directly screwed into the pipe body. A strainer (available only for metal body products) is standard equipment for small flow models and can also be removed. 【Features】 ○ Ceramic is used in the nozzle body’s tip ○ Simple integrated nozzle ○ Strainer is standard equipment for small flow models and can be removed ○ The spray tip is made of ceramic and resin → The ceramic nozzle is molded with a durable engineering plastic For more details, please contact us or download the catalog.

  • Aggregates and crushed stone
  • Water and sewerage pipe fittings
  • Roof and gutter construction

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Air suction type fan-shaped nozzle "Uniform Distribution Nozzle (Air Suction Type) EJVV"

Air suction type fan-shaped nozzle "Uniform Distribution Nozzle (Air Suction Type) EJVV"

Standard pressure 0.3 MPa! Air suction type fan-shaped nozzle with a large spread in the spray thickness direction.

The "Uniform Distribution Nozzle (Air Suction Type) EJVV" is an air suction type fan-shaped nozzle that provides a uniform spray pattern with a wide flow distribution across its entire area. Compared to standard fan-shaped nozzles, it has a greater spread in the direction of spray thickness, with a width-to-thickness ratio of 3 to 4:1. The foreign object passage diameter and average particle diameter are slightly larger than those of standard fan-shaped nozzles, and when multiple nozzles are arranged, overlapping the patterns at both ends results in an even flow distribution across the entire width. 【Features】 ○ Uniform spray pattern with a wide flow distribution across the entire area ○ Width-to-thickness ratio of the spray pattern is 3 to 4:1 ○ Greater spread in the direction of spray thickness compared to standard fan-shaped nozzles ○ Slightly larger foreign object passage diameter and average particle diameter compared to standard fan-shaped nozzles ○ Composed of three parts: spray tip, cap, and adapter For more details, please contact us or download the catalog.

  • Water and sewerage pipe fittings

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Conical nozzle "Uniform distribution nozzle / Standard alumina type JUXP-AL92"

Conical nozzle "Uniform distribution nozzle / Standard alumina type JUXP-AL92"

Standard alumina type! Circular spray pattern with uniform flow distribution conical nozzle.

The "Uniform Distribution Nozzle / Standard Alumina Type JUXP-AL92" is a conical nozzle with a circular spray pattern and uniform flow distribution. It is a nozzle with a body and whirler that are sintered as a single unit, using an X-shaped whirler for the spinner. It has a large foreign object passage diameter, making it less prone to clogging. The section from the whirler to the tip is made of high-purity alumina ceramic, providing excellent wear resistance. It is available in medium to large spray volumes. 【Features】 ○ Circular spray pattern with uniform flow distribution ○ Excellent wear resistance ○ Structure that is less prone to clogging ○ Made of alumina ceramic ○ Available in medium to large spray volumes For more details, please contact us or download the catalog.

  • Water and sewerage pipe fittings

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Uniform Distribution Nozzle (Large Spray) JJHP

Uniform Distribution Nozzle (Large Spray) JJHP

Low pressure, high flow rate! A circular spray pattern with uniform flow distribution conical nozzle.

The "Uniform Distribution Nozzle (Large Spray) JJHP" is a conical nozzle with a circular spray pattern and uniform flow distribution. It maintains a uniform flow distribution even at low pressure and allows for large spray volumes. Even at a low pressure spray of 0.05 MPa, it achieves uniform and equal distribution. Despite its large flow rate, it has a compact size (approximately 13% reduction in total nozzle length compared to conventional products and a weight reduction of about 1 kg), enabling miniaturization and lightweight design of equipment. 【Features】 - Circular spray pattern with uniform flow distribution - Stable and uniform spraying even at low pressure - Compact type - Enables miniaturization and lightweight design of equipment - Two-body nozzle consisting of the main body and a whirler For more details, please contact us or download the catalog.

  • Water and sewerage pipe fittings

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Integrated standard fan-shaped nozzle "Yamagata distribution nozzle VVP"

Integrated standard fan-shaped nozzle "Yamagata distribution nozzle VVP"

All-metal or all-plastic! A simple integrated nozzle that generates a fan-shaped spray.

The "Yamagata Distribution Nozzle VVP" can generate a fan-shaped spray with a Y-shaped flow distribution that is strong in the center and gradually weakens towards both ends. When using multiple nozzles in an array, overlapping the patterns at both ends results in an even flow distribution across the entire width. It is a simple integrated nozzle made of all metal or all resin, which is directly screwed into the pipe. A strainer (available only for metal body products) is standard equipment for small flow products and can also be removed. 【Features】 ○ Yamagata distribution nozzle ○ Simple integrated nozzle ○ Made of all metal or all resin ○ Even flow distribution across the entire width ○ Strainer is standard equipment for small flow products For more details, please contact us or download the catalog.

  • Aggregates and crushed stone
  • Water and sewerage pipe fittings
  • Roof and gutter construction

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Uniform Sector Nozzle "Uniform Distribution Nozzle VEP"

Uniform Sector Nozzle "Uniform Distribution Nozzle VEP"

Ceramic integrated nozzle! Sector nozzle with uniform flow distribution spray pattern.

The "Uniform Distribution Nozzle VEP" is a uniform fan-shaped nozzle that generates a fan spray with an even flow distribution across the entire spray pattern. The impact force per unit area is uniform. It is an integrated nozzle that uses ceramic in the spray tip. The Seltim is a ceramic-resin spray tip molded from a robust engineering plastic. It is ideal for use in industries such as steel, machinery, electrical and electronics, printing, food, and vehicles and transportation. 【Features】 ○ Generates a fan spray with uniform flow distribution ○ Spray pattern with uniform flow distribution across the entire area ○ Integrated nozzle that uses ceramic in the nozzle tip ○ Uniform impact force per unit area ○ Seltim is a ceramic-resin spray tip For more details, please contact us or download the catalog.

  • Aggregates and crushed stone
  • Water and sewerage pipe fittings
  • Roof and gutter construction

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
2-fluid nozzle "Fan-shaped nozzle VVEA"

2-fluid nozzle "Fan-shaped nozzle VVEA"

Fine mist and medium mist generated! A two-fluid fan-shaped nozzle capable of thin spraying in the thickness direction with strong impact force.

The "Fan-Shaped Nozzle VVEA" is a two-fluid nozzle composed of multiple parts including a nozzle tip, cap, mixing adapter, and liquid socket. It features internal mixing, where compressed air and liquid are mixed inside the nozzle for atomization. (It is a pre-mix type that mixes liquid and compressed air within the nozzle adapter.) The liquid is pressurized and supplied to the two-fluid nozzle, spraying at a pressure of approximately 0.2 to 0.7 MPa. 【Features】 ○ A nozzle that sprays fine mist with a thin thickness and uniform distribution. ○ A two-fluid fan-shaped nozzle that generates fine mist with an average particle diameter of over 50 μm. ○ Capable of spraying with a thin thickness in the thickness direction and strong impact force. ○ A liquid pressurization type that sprays at a pressure of approximately 0.2 to 0.7 MPa. ○ It has a wide flow adjustment range with minimal variation in spray angle. For more details, please contact us or download the catalog.

  • Water and sewerage pipe fittings

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
2-fluid nozzle "Fan-shaped nozzle BAVV"

2-fluid nozzle "Fan-shaped nozzle BAVV"

The foreign object passage diameter is large, making it difficult to clog! Ultra-low pressure method mist generation two-fluid fan-shaped nozzle.

The "Fan-Shaped Nozzle BAVV" consists of three components: a nozzle, an adapter, and a liquid socket, and it is a high-flow two-fluid fan-shaped nozzle that generates a fine mist with an average particle diameter of 40μm or more. It features an internal mixing design that atomizes by mixing compressed air and liquid inside the nozzle. (Compressed air flows in the center of the nozzle, while liquid flows around the outer perimeter in an internal mixing air type.) It has a large foreign object passage diameter, making it less prone to clogging. It is a liquid pressurization type that supplies liquid under pressure to the two-fluid nozzle. 【Features】 ○ Generates a fine mist with an average particle diameter of 40μm or more ○ High-flow two-fluid fan-shaped nozzle ○ Low running costs due to blower air specifications ○ Large foreign object passage diameter, making it less prone to clogging ○ Liquid pressurization type that supplies liquid under pressure to the two-fluid nozzle For more details, please contact us or download the catalog.

  • Water and sewerage pipe fittings

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Ultra-low pressure fan-shaped nozzle "Wide Angle Uniform Distribution Nozzle (Ultra-low Pressure Specification) LYYP"

Ultra-low pressure fan-shaped nozzle "Wide Angle Uniform Distribution Nozzle (Ultra-low Pressure Specification) LYYP"

All products are oil-free processed! Ultra-wide-angle fan-shaped nozzle that achieves uniform flow distribution at ultra-low pressure.

The "Wide Angle Uniform Distribution Nozzle (Ultra Low Pressure Specification) LYYP" is a wide-angle fan-shaped nozzle that achieves a wide angle and uniform flow distribution at ultra-low liquid pressure (0.015 MPa). It is a low flow type with a soft impact that does not create spray bubbles, and all products undergo oil-free treatment. It is ideal for applications such as spraying developer solutions in semiconductor manufacturing equipment, micro-spraying in chemical manufacturing processes, and spraying chemical solutions onto surface-treated steel plates. The material is PVC, and it is an all-plastic integrated nozzle. 【Features】 - Generates wide-angle and uniform fan-shaped spray at ultra-low liquid pressure - Low flow type with a soft impact that does not create spray bubbles - All products undergo oil-free treatment - All-plastic integrated nozzle For more details, please contact us or download the catalog.

  • Water and sewerage pipe fittings

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

nozzleに関連する検索キーワード

COPYRIGHT © 2001-2025 IPROS CORPORATION ALL RIGHTS RESERVED.