nozzle(10mm) - List of Manufacturers, Suppliers, Companies and Products

Last Updated： Aggregation Period:Sep 17, 2025～Oct 14, 2025
This ranking is based on the number of page views on our site.

nozzle Product List

16～30 item / All 95 items

Displayed results
Cultivation System "Gaia Tomato K"

Cultivation System "Gaia Tomato K"

Easier and more reliable management of tomato cultivation! High yields suitable for large-scale facility horticulture can be expected.

"Gaia Tomato K" is a system that can be expected to achieve high yields suitable for large-scale facility horticulture through the introduction of high-wire cultivation and rail-type carts. It works in conjunction with the greenhouse nutrient control panel "Ultra Ace K," which is equipped with irrigation control and monitoring functions, enabling the cultivation of high-quality tomatoes. Additionally, the easy-to-install beds shorten the construction period and help keep costs down. [Features] ■ Irrigation history is visible ■ Can be introduced at a low cost ■ Waste-free nutrient supply with solar radiation proportional control ■ Growing medium is rock wool ■ Foam beds *For more details, please refer to the PDF materials or feel free to contact us.

  • Automatic Control Equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Resin Spray Nozzle "King Nozzle" TYPE-CD Series

Resin Spray Nozzle "King Nozzle" TYPE-CD Series

Full cone spray type, spraying up to a maximum of 49.0 L/min at a pressure of 0.5 MPa.

The 【TYPE-CD】 is a full cone spray nozzle made of PP (polypropylene). It was developed as an enlarged version of our "TYPE-AS." The spray angle is relatively small, and the mist particles are coarser and larger compared to the hollow cone type, making it ideal for cleaning, cooling, watering, and defoaming. Additionally, since it is made of resin (polypropylene: PP), it is resistant to acids and alkalis, making it suitable for surface cleaning before painting or plating.

  • Water Treatment
  • Water and sewerage pipe fittings
  • Sweeping vehicles, grass cutting vehicles, road surface regeneration machines, snow removal machines

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Air Nozzle Air Blaster Compact Type AB-C7P Model

Air Nozzle Air Blaster Compact Type AB-C7P Model

The air nozzle has become approximately 67% more compact compared to our standard model. It is perfect for use in tight spaces!

A compact type has been introduced in the Air Blaster series! This flat-type air nozzle has been developed with the concept of being "the most compact" to meet our customers' space-saving design needs. 【Features】 - Compact design with dimensions of 25mm in length, 30mm in width, and 10mm in thickness, weighing 5g, making it ideal for use in tight spaces. - Saves space during equipment design. - Made of PPS resin, which has excellent heat resistance and chemical resistance (heat resistance temperature: 130°C). 【Applications】 - For draining water and oil from products and parts, blowing away during sorting, removing foreign substances, and cleaning. - For cooling and drying plates, films, cotton materials, pipes, cans, etc., as well as draining and drying surfaces and interiors, and removing dust. - For various applications such as blocking outside air, dust, insects, and foreign substances (air curtain).

  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Stainless steel piping for mist nozzles (fine mist cooling) ≪Commonly known as: Easy Pipe≫

Stainless steel piping for mist nozzles (fine mist cooling) ≪Commonly known as: Easy Pipe≫

The mist nozzle (fine mist cooling nozzle) is here with three advantages: easy installation, time-saving, and durability!

Although I purchased a mist nozzle (fine mist cooling), it's quite difficult to install and position it with the tube... This Easy Pipe solves that problem. <<Maximum Features>> - No risk of cap falling off due to knurled finish! - Just turn it by hand! It greatly contributes to countermeasures against the scorching heat in summer and dryness in winter. It is often used for temperature and humidity management in plant cultivation and livestock facilities. Additionally, it is used not only in the agricultural market but also in the industrial market (food, semiconductors, paper manufacturing) for temperature and humidity control. A significant feature of the fine mist spray is that it can regulate temperature and humidity without wetting crops, livestock, or products. Isn't it quite a hassle to connect such an important nozzle with piping? With the Easy Pipe, connections are easy! It's sturdier than a tube and can be attached and detached easily.

  • Mist Generator

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Hollow cone nozzle "Spillback Nozzle GSPB"

Hollow cone nozzle "Spillback Nozzle GSPB"

High flow type! Liquid high-pressure return nozzle for circulating fluidized bed gas desulfurization system.

The "Spillback Nozzle GSPB" is a high-flow type of SPB nozzle, designed for a circulating fluidized bed gas desulfurization system, featuring a single liquid high-pressure air cone nozzle (return nozzle). It supplies liquid (water) to the nozzle at a constant pressure and adjusts the spray volume by opening and closing the discharge valve. The turn-down ratio (throttling ratio) of the spray volume is 1:10. It is an optimal spray nozzle for gas cooling with minimal particle size variation. 【Features】 ○ Annular spray pattern ○ Variable spray flow rate ○ High-flow type of SPB nozzle (return nozzle) ○ Turn-down ratio (throttling ratio) of spray volume is 1:10 ○ Minimal particle size variation For more details, please contact us or download the catalog.

  • Water and sewerage pipe fittings

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
2-fluid nozzle "Full Cone Nozzle JOKIJet"

2-fluid nozzle "Full Cone Nozzle JOKIJet"

Low running costs! Two-fluid filling cone nozzle using steam instead of compressed air.

The "JOKIJet Conical Nozzle" is a two-fluid conical nozzle composed of multiple parts such as the nozzle body, adapter, O-ring, and flange, using steam instead of compressed air. It features external mixing, where compressed air and liquid are mixed outside the nozzle for atomization. It is a liquid pressurization type that supplies pressurized liquid to the two-fluid nozzle. Due to its steam specification, it can be used at low running costs in factories with boiler facilities. 【Features】 ○ Steam-driven nozzle ○ Two-fluid conical nozzle ○ Available at low running costs ○ External mixing type ○ Liquid pressurization type For more details, please contact us or download the catalog.

  • Water and sewerage pipe fittings

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Air nozzle, air jet nozzle, KSV type, KBV type, KAV type.

Air nozzle, air jet nozzle, KSV type, KBV type, KAV type.

With a high straight-line performance and high flow rate air nozzle, it demonstrates great power in spot blowing.

The orifice has a circular cross-section, and after the gas is constricted in the throat section, it passes through an exit designed in a flared shape, jetting at a flow velocity greater than the speed of sound at an injection angle of approximately 16°, achieving effective spot spraying. 【Features】 - High jet velocity can be achieved. - Excellent straightness.

  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Air Nozzle Air Jet Nozzle Blower Type AJ-B190A

Air Nozzle Air Jet Nozzle Blower Type AJ-B190A

A dedicated spot nozzle for blowers, which is a labor-saving tool for factory air.

It concentrates the spray in a conical shape, providing a high impact. This nozzle is ideal for draining, drying, dust removal, and cooling of products and workpieces. 【Features】 - Energy-saving design using a blower. - High impact. 【Applications】 Draining, drying, cooling, dust removal, foreign object removal, cleaning of products and workpieces. *For more details, please contact us or download the catalog to view.

  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Hollow Cone Nozzle "Spillback Nozzle SPB"

Hollow Cone Nozzle "Spillback Nozzle SPB"

Massive generation of fine mist! Extremely low particle size variation air cone nozzle.

The "Spillback Nozzle SPB" is a variable flow conical nozzle (return nozzle) that produces a large amount of fine mist in a circular spray pattern. The spray flow rate can be adjusted by opening and closing the discharge valve while maintaining a constant supply water pressure, with the maximum spray flow rate at fully closed and the minimum at fully open. The turndown ratio of the spray flow rate (throttling ratio) is 1:10. The change in particle size between maximum and minimum spray flow rates is small, making it ideal for vapor cooling when the inlet gas temperature varies. 【Features】 ○ Circular spray pattern ○ Variable spray flow rate ○ Turndown ratio of 1:10 ○ Minimal change in particle size ○ Suitable for gas cooling with variations in flow rate and temperature For more details, please contact us or download the catalog.

  • Water and sewerage pipe fittings

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Ultra Fine Bubble Generation Nozzle UFB DUAL Product Specifications for Each Size

Ultra Fine Bubble Generation Nozzle UFB DUAL Product Specifications for Each Size

Just connect to the water supply! The UFB DUAL generates ultra-fine bubbles (nano bubbles) using only water pressure.

The "UFB DUAL" is a product certified with the JET mark. It is a nozzle that can be directly connected to a water supply pipe, capable of generating ultra-fine bubbles from some of the air components contained in water without introducing outside air. There are no changes to water quality, purity, or pH. The UFB DUAL generates ultra-fine bubbles solely through water flow, so no pump or power supply is required. Since it connects directly to the water supply pipe, there is no need to secure a separate installation space. Additionally, Lives Co., Ltd. extends the warranty period even after the manufacturer's warranty has expired, providing a total warranty of 10 years. *Under conditions of use with potable water. 【Features】 ■ Can be directly connected to water supply piping. No need to choose an installation location. ■ Generates ultra-fine bubbles using only the water pressure from tap water. No pump is needed. ■ Supports large flow rates of 40A or more. Suitable for large facilities. ■ Other fluids besides water can also be used. (Custom-made production of materials is possible. Please consult us.) *For more details, please refer to the PDF document or feel free to contact us.

  • Bathroom, shower, washbasin and toilet equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[Sonic] Water Drainage Drying Case Studies: Issues with Bottle Labeling

[Sonic] Water Drainage Drying Case Studies: Issues with Bottle Labeling

There was no need for additional construction, and it fit into the existing production line.

Sonic Corporation decided to operate the Sonic150 with 25 horsepower and two air knives, and to circulate air to raise the temperature coming from the air knives. The concept behind Sonic Corporation's revolutionary VT (patent pending) design is to utilize the pressure heat from the blower by partially circulating air. The exit temperature from the air knife will be approximately 45°C to 50°C. This method does not require an external thermal system. The air knife is installed about 10mm away from the bottle, allowing the bottle to pass through at a wind speed of approximately 9,300m/min. The high-speed air and heated exit temperature melt the ice and turn the remaining moisture into mist. As a result, the bottles can be completely dried. [Content] [Issues] ○ Moisture and cold air leave water droplets on the glass, resulting in the reformation of droplets before labeling. ○ Labels cannot be applied until the bottles are dried. ○ The injection and labeling of bottles can only occur after the empty bottles are stacked in a warmed warehouse and heated. For more details, please contact us or download the catalog.

  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Air nozzle "Multi-hole fan-shaped nozzle (disassemblable) HF"

Air nozzle "Multi-hole fan-shaped nozzle (disassemblable) HF"

Compact design! Air nozzle that evenly sprays air from multiple injection holes.

The "Multi-porous Fan-shaped Nozzle (Disassemblable) HF" is a three-part air nozzle composed of multiple injection holes that evenly spray air. It features a compact design with a total length of 47mm. Made of stainless steel, it is resistant to heat and impact, and the injection holes can be cleaned by disassembling the nozzle. Compared to single-hole air nozzles, it reduces the injection noise by more than 10 dB(A). It is used in industries such as steel, machinery, electrical and electronics, paper, pulp and printing, food, and transportation. 【Features】 ○ Excellent uniformity and quietness ○ Even air spraying from multiple injection holes ○ Compact design with a total length of 47mm ○ Injection holes can be cleaned by disassembling ○ Made of stainless steel, resistant to heat and impact For more details, please contact us or download the catalog.

  • Water and sewerage pipe fittings

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Resin Spray Nozzle "King Nozzle" TYPE-CDH Series

Resin Spray Nozzle "King Nozzle" TYPE-CDH Series

High flow hollow cone type spray nozzle

The 【TYPE-NF】 is a PP (polypropylene) spray nozzle of the hollow cone spray type. It was developed as an enlarged version of the TYPE-NF. Compared to other hollow cone types, the particles are larger, and the flow rate is higher, making it ideal for large-volume cooling, humidification, and defoaming. It is also suitable for air cleaning and washing in large-volume air washers and scrubbers, as well as for irrigation in large-scale agriculture and livestock, and for defoaming in wastewater treatment plants. Being made of resin, it is resistant to acids and alkalis, making it suitable for surface cleaning before painting or plating.

  • Water Treatment
  • Water and sewerage pipe fittings
  • Sweeping vehicles, grass cutting vehicles, road surface regeneration machines, snow removal machines

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
High-pressure spray humidifier "Clean Mist"

High-pressure spray humidifier "Clean Mist"

Effectively humidify indoor spaces! It is effective for preventing influenza infections and addressing dryness during the winter months.

"Clean Mist" is a fine water mist spraying device specialized for indoor humidification, utilizing the capabilities of Eco Mist. By evaporating the finely misted water, it humidifies the indoor environment. It is capable of providing sufficient humidity even in large spaces such as halls, which was previously difficult with just one unit. Please feel free to contact us when you need assistance. 【Features】 ■ Indoor humidification specification ■ Stepless air volume adjustment ■ Passes leaching performance tests compliant with the Water Supply Act (excluding SIH-60S5) ■ Equipped with humidity sensor for ON-OFF control ■ Intermittent operation timer function *For more details, please refer to the PDF materials or feel free to contact us.

  • クリーンミスト事例_1.jpg
  • クリーンミスト事例_2.jpg
  • クリーンミスト事例_3.jpg
  • クリーンミスト事例_4.jpg
  • イプロス登録画像(レンタルパートナー ).png
  • 無料トライアル実施中.png
  • Mist Generator

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
2-fluid nozzle "Full Cone Nozzle (Small Spray) CBIMJ"

2-fluid nozzle "Full Cone Nozzle (Small Spray) CBIMJ"

Wide range of flow adjustment! A full cone nozzle that generates a fine mist with an average particle diameter of 100μm or less.

The "Full Cone Nozzle (Low Volume Spray) CBIMJ" is a two-fluid full cone nozzle that generates a fine mist with an average particle diameter of 100μm or less, featuring a circular spray pattern with an even flow distribution. It consists of four components: nozzle tip, core, cap, and adapter, and is a liquid pressurized type that supplies liquid to the two-fluid nozzle under pressure. The spray angle is 20°. It is an internal mixing type that atomizes by mixing compressed air and liquid inside the nozzle. 【Features】 ○ Circular spray pattern with even flow distribution ○ Wide range of spray flow adjustment ○ Minimum spray flow in two-fluid operation ○ Compact type ○ Structure resistant to clogging For more details, please contact us or download the catalog.

  • Water and sewerage pipe fittings

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Search Keywords Related to nozzle

COPYRIGHT © 2001-2025 IPROS CORPORATION ALL RIGHTS RESERVED.