Last Updated： Aggregation Period:Nov 05, 2025～Dec 02, 2025
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Nov 05, 2025～Dec 02, 2025
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Nov 05, 2025～Dec 02, 2025
This ranking is based on the number of page views on our site.
151～165 item / All 253 items
We can carry out grouting work with uniform quality.
High fluidity non-separating mortar Filcon 300W has low suspension in seawater and river water, allowing for grouting work of uniform quality. It excels in pumpability and self-leveling properties. For more details, please contact us or refer to the catalog.
For the cross-sectional repair of defective concrete structures. Lightweight polymer cement mortar.
The ultra-fast hard lightweight sectional repair material, Lion GRLC-J, is primarily composed of a special inorganic material based on ultra-fast hard cement, and is a lightweight polymer cement mortar that includes high-performance special powdered resin and special short fibers pre-mixed. For more details, please contact us or refer to the catalog.
A polymer cement mortar with excellent pumpability and thick application properties.
Polymer cement-based spray material Refre G Shot is a polymer cement mortar that excels in pumpability and thickness application. By simply mixing it with the specified amount of water on-site, a stable polymer cement mortar can be produced. It has minimal rebound and sag during spraying, and can be applied in thicknesses of up to approximately 30mm at once on ceiling surfaces. For more details, please contact us or refer to the catalog.
Industry first! Low-carbon cement material that reduces CO2 emissions by 32% compared to conventional products.
The low-carbon Filcon TF is a non-shrink mortar that incorporates latent hydraulic materials with extremely low CO2 emissions during production into a portion of the raw cement, achieving a 32% reduction in overall CO2 emissions compared to conventional materials from our company. It can be proposed as a CO2 reduction measure in technical proposals for comprehensive evaluation systems, such as environmentally considerate design for structures (CASBEE). Our material technology is utilized, allowing for a reduction in CO2 emissions while maintaining nearly the same physical performance as conventional products.
New lightweight pre-mixed mortar for wooden buildings that can be applied with a brush and pumped.
The exterior base adjustment material, Fujimoru, is a new lightweight pre-mixed mortar for wooden structures that can be applied with a brush and pumped. It is ideally formulated with Portland cement, special lightweight aggregates, special fibers, and admixtures to exhibit excellent performance, while also allowing for the use of a wooden trowel, making it exceptionally workable. Compared to sand mortar, it reduces the occurrence of cracks. With about half the weight of sand mortar, it places less load on the substrate, making transportation and application easier. A thickness of 16mm can be applied in one day, which shortens construction time. Its thermal conductivity is extremely low compared to sand mortar, making it effective in preventing condensation. As a pre-mixed product produced in a controlled factory environment, it ensures stable quality and eliminates the need for mixing management on-site. It is certified for fire-resistant structures, with a 45-minute and 1-hour fire-resistance designation. For more details, please contact us or refer to the catalog.
This is an introduction to mortar for finishing the concrete foundation surface of general wooden buildings.
Mortar for finishing concrete foundation surfaces. Foundation mortar can be brushed on and reduces cracks. It also has good adhesion and workability. For wall surfaces, please use the fire-resistant and quasi-fire-resistant certified products Rasumoru and Fujimoru. Fujikawa Building Materials Industry Co., Ltd. is aware of its responsibility as a company that plays a role in the construction and civil engineering industries, and under strict self-discipline, we have been striving for product development that contributes to "creating work in the industry" based on the technical skills we have cultivated over many years. High quality and the trust of our customers are our pride. We also intend to actively cooperate with the activities of the Architectural Institute of Japan, the Japan Society of Architectural Finish, universities, and public research institutions, and contribute to the overall development of the industry. For more details, please contact us or refer to our catalog.
It can be used as filling material for steel plate roll-formed products and as filling material for PC board joint sections.
Civil engineering material LCC mortar for injection and pouring, TN-170J, uses special aggregates and is a lightweight type compared to conventional mortars. In addition to long-term strength (compressive and adhesive strength), its durability is reliable over the long term because it is based on cement. There are no phenomena such as floating water, shelf drop, or material separation. It has excellent non-shrink properties, making it optimal as a grout material. It has excellent fluidity, good filling properties, and can fill without any voids. Surface finishing with a trowel is also satisfactory. Since it is a pre-mixed mortar, there is no hassle of mixing on-site or risk of formulation errors. Just add water and mix, and the work can be completed easily and quickly. For more details, please contact us or refer to the catalog.
Less strain on the shoulders, maintaining pressure with the trowel for speed! Achieving excellent rapid hardening and workability.
Magical SP-3 is the ultimate labor-saving repair material that demonstrates excellent workability, which could not be achieved with a single material in plastering work, thanks to special viscosity adjustment that enhances trowel spread and release, as well as its lightweight nature. It places less burden on the shoulders, allowing for stable work quality with a single coat thickness of 5 to 30 mm while maintaining trowel pressure during ceiling and wall construction. It has excellent rapid hardening properties, reaching practical strength in a short time, and can secure over 30 minutes of usable time even in a 30°C environment. 【Features】 - Outstanding workability - Rapid hardening with a long usable time - Excellent various performances - Compliant with the NEXCO Construction Management Guidelines "Performance Verification Items for Section Repair Using Plastering Method" For more details, please contact us or download the catalog.
For repairing cold joints and construction joints! A special mortar suitable for multiple purposes.
The "TJ Attack Separomol Z-100" is a water-mixed type (premix) ultra non-shrink mortar that only requires mixing with water. It excels in early strength, demonstrating high durability due to its high strength and high density. The hardened material is non-shrink and has high adhesion, making it excellent in durability and water resistance (waterproofing). It has high thixotropic properties (resistance to sagging) on vertical surfaces, and the workability for trowel applications such as V-cut sections and bean board sections (with a single coat thickness of 50mm) is also good. 【Features】 ■ Premix type that only requires mixing with water ■ Excels in early strength, demonstrating high durability due to high strength and high density ■ The hardened material is non-shrink and has high adhesion, making it excellent in durability and water resistance (waterproofing) ■ After curing, the shrinkage over time is minimal, and almost no cracking occurs ■ Good workability for trowel applications such as V-cut sections and bean board sections (with a single coat thickness of 50mm) *For more details, please refer to the PDF document or feel free to contact us.
Non-polymer, non-fiber type
▼Features of S-T Non-Polymer, Non-Fiber Type Z Mortar S-T is a special cement-based corrosion and waterproofing material that does not contain polymer mixing liquids or fibers. It can be applied in facilities that have regulations for non-polymer and non-fiber materials. It is mainly applied to sealed water tanks. ▼Characteristics 【Water Quality】 Meets the leaching test methods and standard values of the Ministry of Health, Labour and Welfare and JWWA Z 108:2016, making it suitable for application on the inner surfaces of concrete water supply facilities. 【Workability】 Can be applied in a single spray or trowel application with a thickness of approximately 10mm to 20mm on vertical surfaces. The rebound loss during spraying is minimal, and trowel application is also favorable. 【Curing Properties】 Exhibits excellent early strength and good workability, allowing for shortened construction periods. At 28 days of age, it demonstrates a compressive strength of over 50N/m², providing stable strength equivalent to or greater than that of concrete. 【Durability】 The cured material is dense and has low permeability, exhibiting excellent durability and wear resistance.
Long-term adhesion stability confirmed cross-section repair method with the company's anti-corrosion coating technology.
The cross-section repair work is a very important process for ensuring the long-term adhesion stability of anti-corrosion coating methods. We have confirmed the adhesion stability performance of all anti-corrosion coating methods in our lineup and confidently promise the restoration of the functionality of the target water tank. ▼ Lineup Z Mortar AR… Fiber-reinforced acid-resistant mortar (for thick application) Z Mortar AR2… Fiber-reinforced acid-resistant mortar (for thick application) Z Mortar BR… Fiber-reinforced acid-resistant mortar (for thin application)
We offer two types according to the temperature! It can reach narrow spaces and ensure reliable filling.
"NEW Filcon M" is a super-fast hardening, non-shrink mortar that achieves practical strength in a short time. It has excellent fluidity, allowing it to reach narrow spaces and fill them reliably. This product is a pre-mixed item with sand already blended in. By simply adding water and mixing, the specified performance can be achieved. 【Features】 ■ Achieves practical strength in a short time ■ Excellent fluidity ■ No bleeding occurs at all ■ No need to worry about leaving voids after filling ■ Two types available according to temperature *For more details, please refer to the PDF document or feel free to contact us.
Achieves practical strength in 1 to several days! Capable of filling complex-shaped voids thoroughly.
"Filcon R" is a non-shrink mortar that excels in fluidity and can fill complex-shaped voids thoroughly. It steadily increases in strength after one week of curing, achieving sufficiently high structural strength. We offer a pre-mixed type with sand already blended and a cement type without sand, allowing for a variety of formulation designs tailored to cost and construction needs. 【Features】 ■ Excellent fluidity ■ Stable strength increase after one week of curing ■ Achieves sufficiently high structural strength ■ No bleeding or settling ■ Ensures no voids remain after filling, allowing for reliable load transfer *For more details, please refer to the PDF document or feel free to contact us.
Special dust-proof agents are used during manufacturing! In mixing and injection work with non-shrink mortar, it is possible to reduce the dispersion of dust.
"Anti-Dust Filcon TF" is a special non-shrink mortar designed to improve working environments on-site. Compared to regular non-shrink mortars, it reduces dust generation during bag disassembly and mixing by over 90%. It helps to minimize dust dispersion during mixing and injection work of non-shrink mortar in places where ventilation is difficult, such as indoors and underground. 【Features】 - Achieves dust prevention while maintaining the quality of the conventional "Filcon TF," including non-shrink and hydration heat suppression properties. - Uses a special dust-reducing agent during manufacturing, which is mixed in to achieve dust prevention. - Reduces dust dispersion during mixing and injection work of non-shrink mortar in places where ventilation is difficult, such as indoors and underground. *For more details, please refer to the PDF document or feel free to contact us.
Temperature stress is reduced, making it possible to suppress temperature cracking! Low-carbon cement material that reduces CO2 by 32% compared to conventional materials.
The "Low Carbon Filcon TF" is a non-shrink mortar oriented towards a low-carbon society, which incorporates latent hydraulic materials with extremely low CO2 emissions during production as part of the raw material cement, resulting in a 32% reduction in total CO2 emissions compared to conventional materials from our company. As the consideration for environmental design in structures (CASBEE) becomes more common, the ability to reduce the CO2 emissions of the filling materials, which account for a significant volume in seismic retrofitting and other applications, provides a substantial advantage when evaluating the environmental consideration of construction projects. Furthermore, by leveraging our material technology, we have successfully reduced CO2 emissions while maintaining nearly all of the physical performance of conventional products. 【Features】 ■ Suppression of temperature cracking due to hydration heat ■ Excellent filling ability ■ Reliable load transfer ■ Stable strength development *For more details, please refer to the PDF document or feel free to contact us.
