Catch Latch "Push Latch TL-298"
It is a mechanical component primarily intended for locking doors and lids.
I have set the handle and latch together. The lock just needs to be pressed in.
- 企業：栃木屋
- 価格：Less than 10,000 yen
latch×栃木屋 - メーカー・企業と製品の一覧
latchの製品一覧
91～105 件を表示 ／ 全 106 件
表示件数
Catch Latch "Royal Latch TL-31"
It is a mechanical component primarily intended for locking doors and lids.
It is a latch that can lock the lid with a single touch.
- 企業：栃木屋
- 価格：Less than 10,000 yen
Catch Latch "Cattle Lock TL-48"
It is a mechanical component primarily designed for locking doors and lids.
You can lock and unlock with just a push operation.
- 企業：栃木屋
- 価格：Less than 10,000 yen
Catch latch "Automatic door stop fitting TL-82"
It is a mechanical component primarily intended for locking doors and lids.
The receiving bracket is pulled in and tightened by the action of the spring.
- 企業：栃木屋
- 価格：Less than 10,000 yen
Catch Latch "Stopper TL-249"
It is a mechanical component primarily intended for locking doors and lids.
This is a latch-reversing stopper that easily secures the lid just by pressing it in. It holds the latch with a spring, allowing it to absorb vibrations as well.
- 企業：栃木屋
- 価格：Less than 10,000 yen
Catch Latch "Slide Lock TL-290"
It is a mechanical component primarily designed for locking doors and lids.
By rotating the grip 90°, the pin lock is activated and automatically locks. It can be used with confidence, especially with equipment that has vibrations.
- 企業：栃木屋
- 価格：Less than 10,000 yen
Catch Latch "Stainless Steel Slide Latch TL-291"
It is a mechanical component primarily designed for locking doors and lids.
The design seeks operability and safety, making it particularly suitable for equipment with vibrations.
- 企業：栃木屋
- 価格：Less than 10,000 yen
Catch Latch "Slide Latch Rod TL-408"
It is a mechanical component primarily intended for locking doors and lids.
-
- 企業：栃木屋
- 価格：Less than 10,000 yen
Catch Latch "Canoe Clip TL-180"
It is a mechanical component primarily intended for locking doors and lids.
It is a simple fastener that stops panels. It can also be used for filling holes.
- 企業：栃木屋
- 価格：Less than 10,000 yen
Catch Latch "Solenoid Latch (Variable Type) TL-398"
It is a mechanical component primarily intended for locking doors and lids.
This is a latch unit incorporating a solenoid. It locks by pushing the door and unlocks by applying power. The locking and unlocking status of the latch can be detected by a microswitch. Additionally, the tip of the latch can be fixed at 90° intervals, allowing it to be adjusted according to the direction of use. The TL-398-1 also includes a mechanical lock for emergency use.
- 企業：栃木屋
- 価格：Less than 10,000 yen
Catch Latch "Solenoid Lock TL-400"
It is a mechanical component primarily intended for locking doors and lids.
By closing the door, the latch engages with the keeper and locks. At this time, the keeper presses the switch plate, causing the micro switch to turn ON (COM (yellow) - NO (blue)). By supplying power to the solenoid, the latch lock is released (red-white: DC24[V]). *Only the lock is released; the latch itself does not operate. In this state, pulling the door allows the keeper to be removed from the latch. By combining it with various types of locks, it can be unlocked with a key in case of emergency (this product does not include a lock or key). The mounting holes have been countersunk on both sides, allowing for installation on either side.
- 企業：栃木屋
- 価格：Less than 10,000 yen
Cap Stop "Solenoid Latch TL-259"
It is a mechanical component primarily intended for locking doors and lids.
This is a latch unit that incorporates a solenoid. When closing the door, you can simply push it in as is. To open it, you can operate it using the power switch (not possible when locked). Additionally, it also has a mechanical lock built in for emergency use (TL-258-1, TL-259-1).
- 企業：栃木屋
- 価格：Less than 10,000 yen
Catch Latch "Push Latch (Magnet Type) TL-444"
It is ideal for areas with frequent opening and closing.
When pushed in, a stopper engages in the slider section, maintaining the door in a closed state with magnetic force. If pushed in again, the stopper is released, and the door is kicked out by an internal spring. This repeated pushing action is suitable for areas with frequent opening and closing.
- 企業：栃木屋
- 価格：Other
Catch Latch "Crescent TL-443"
It can also be used as a retaining function for doors and lids of enclosures.
This is a stop fitting for window frames (sashes) such as sliding doors. It has a click sensation both when locking and unlocking. It is an image of hardware for fixtures installed on windows and sliding sashes, but it can also be used as a holding function for doors or lids of enclosures, providing a tightening and sealing effect in addition to the original function of the crescent, allowing for secure fixation.
- 企業：栃木屋
- 価格：Other
Catch Latch "Box Roller Catch TL-222"
It is a mechanical component primarily designed for locking doors and lids.
The contact part is made of metal rollers, which provides excellent wear resistance.
- 企業：栃木屋
- 価格：Less than 10,000 yen
