jig×イマダ - メーカー・企業と製品の一覧

jigの製品一覧

1～15 件を表示 ／ 全 37 件

表示件数
Friction Coefficient Measurement Fixture COF Series

Friction Coefficient Measurement Fixture COF Series

Measure the friction coefficient of paper and film! Easily calculate the static friction coefficient and average dynamic friction coefficient with optional software!

The COF series friction coefficient measurement fixture is designed to measure the friction coefficients of materials such as paper and film. 【Features】 ■ Available in both vertical and horizontal stand options, allowing customers to choose based on their measurement space. ■ Measurements can be made in partial compliance with JIS/ISO standards. ・JIS P 8147: 2010 ・JIS K7125: 1999 (ISO 8295:1995) *Please refer to page P1 "Related Standards" in the COF series catalog for the corresponding fixtures for each standard. ■ Custom products are available that enable the measurement of friction coefficients for plastic films and sheets in partial compliance with ASTM D 1894-14. ■ By using separately sold graphing software, static friction coefficients and average dynamic friction coefficients can be automatically calculated. 【Usage Image】 Please refer to the "Related Videos" below.

  • Other measuring instruments

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Electronic component peeling strength test fixture Chip peeling fixture 'GT Series'

Electronic component peeling strength test fixture Chip peeling fixture 'GT Series'

Compact and lightweight, suitable for measuring low load ranges! This attachment is ideal for measuring the peel (shear) strength of welded or bonded electronic components.

The GT series is a chip peeling test attachment designed to be used in combination with Imada's force gauge (load measuring device). The Imada force gauge can achieve various load measurements when combined with the attachment. 【Features of the GT Series】 - Ideal for testing the peeling (shear) strength of chips that are welded or glued to electronic components. - Compact and lightweight, making it suitable for measurements in narrow spaces and low load ranges. - Available in two types: "GT-10" for tensile testing and "GT-20" for compression testing. ■ For information on Imada's force gauges, please refer to the related products at the bottom of the page. ■ We also offer measurement stands that improve measurement stability and software that is convenient for graph creation and data analysis. For more details, please visit our website. * Our website features various load measurement videos using Imada products. ▼ Please check the URL below for various test videos related to electronic components.

  • Other analytical equipment

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Crimp terminal tensile strength testing jig CW series

Crimp terminal tensile strength testing jig CW series

This is a wire clamp fixture for tensile testing of crimped terminals, firmly clamping battery cables and thick wires for crimp strength and tensile strength tests.

The CW-5000N is a wire clamp fixture for tensile testing of crimp terminals. With a load capacity of 5000N, it can also measure the crimp strength of thick wires such as battery cables. By combining it with a force gauge, measurement stand, and terminal fixing fixture (CH-5000N), tensile strength tests can be easily conducted. Measurement in accordance with JIS C 2805 (2010) is also possible with specific product configurations. 【Features】 - The wire is secured and fixed using bolts. - The structure is designed to minimize tearing and pulling out, ensuring reliable retention and accurate measurement.

  • Other analytical equipment

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Crimp Terminal Tensile Strength Test Fixture "CH-5000N"

Crimp Terminal Tensile Strength Test Fixture "CH-5000N"

A fixture for fixing terminals for crimped terminal tensile testing. With a load capacity of 5000N, it is ideal for measuring the crimp strength of thick wires such as battery cables.

The CH-5000N is a terminal fixture for tensile testing of crimp terminals. It has a load capacity of 5000N and can measure the crimp strength of thick wires such as battery cables. By combining it with a force gauge, measurement stand, and wire clamp fixture (CW-5000N), tensile strength tests can be easily conducted. Measurement in accordance with JIS C 2805 (2010) is also possible with specific product configurations. 【Features】 - The terminal is screwed onto a fixed plate, which is then hooked onto a pin for use. - It accommodates a wide range of sample diameters from φ6 to φ12mm. 【Specifications】 - Measurable diameter: 4 to 12mm (inner diameter of terminal hole)

  • Other analytical equipment

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Cardboard Opening Test and Sealing Strength Measurement Jig 'DF-60'

Cardboard Opening Test and Sealing Strength Measurement Jig 'DF-60'

Simply insert and pull to easily measure! This hook fixture is ideal for measuring the opening strength of cardboard boxes sealed with adhesive.

The DF-60 is a tensile testing attachment used in combination with Imada's force gauge (load measuring device). The Imada force gauge, when combined with the attachment, enables various load measurements. 【Features of DF-60】 - It is an optimal hook fixture for measuring the hot melt adhesive strength of cardboard boxes. - It is inserted into the gap of the lid and pulled to measure the sealing strength. - It can be used for sampling inspections before shipment and for strength measurements during resealing. ■ For Imada's force gauges, please refer to the related products at the bottom of the page. * Our website features various load measurement videos using Imada products. ▼ Please check the URL below for testing videos of various packaging containers, including cardboard.

  • Other measuring instruments

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Needle Withdrawal Test Fixture 'MED-NPT-200N'

Needle Withdrawal Test Fixture 'MED-NPT-200N'

A fixture for testing the pull-out strength of the needle base and needle tube of a syringe. Measurement compatible with JIS/ISO standards is possible.

This is a dedicated fixture (attachment) for measuring the force required to pull out the needle base and needle tube of a syringe. It can be used in conjunction with a force gauge and measurement stand to perform measurements in accordance with standards. 【Features】 ■ Needles can accommodate a diameter of φ0.3 to 2.0mm and a length of 10mm or more. ■ Measurements can be partially compliant with JIS/ISO standards related to injection needles. Partially compliant with JIS T 3209:2011 "Sterilized Injection Needles" (ISO 7864:2016 compliant). * Other JIS/ISO standards can also be accommodated. Please check the basic information and PDF materials for details. 【You can try the product】 We have a laboratory where you can actually operate the product. Our technical staff will be present to provide reliable measurement solutions. 【Providing suitable load measurement solutions with 70 years of know-how】 Imada is a manufacturer of load measurement equipment that produced Japan's first force gauge in 1947. We offer a wide range of products tailored to various measurement needs. For load measurement, trust Imada.

  • Other measuring instruments

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Probe Tack Test Fixture 'MED-IS-20N'

Probe Tack Test Fixture 'MED-IS-20N'

Adhesive strength testing fixtures for items like band-aids! Measurements compliant with ASTM and other standards are possible.

The "MED-IS-20N" is a dedicated fixture (attachment) for measuring the tackiness of adhesive materials such as band-aids using a tack test. When combined with a force gauge and measurement stand, it enables measurements in accordance with standards. 【Features】 ■ Capable of measurements partially compliant with standards - Partially compliant with ASTM D2979:2016 "Standard Test Method for Pressure-Sensitive Tack of Adhesives Using an Inverted Probe Machine" - Partially compliant with the Japanese Pharmacopoeia 6.12.(3.4.): Seventeenth Revision "Probe Tack Test Method" * A force gauge and measurement stand are required to perform measurements that are partially compliant with the standards. * For more details, please refer to the PDF materials or feel free to contact us.

  • Other measuring instruments

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Syringe Compression Test Fixture "MED-SCT-500N"

Syringe Compression Test Fixture "MED-SCT-500N"

*You can try it out* *Fixture for compression testing of syringes. Measurement compatible with ISO standards is possible.*

This is a dedicated fixture (attachment) for measuring the force applied to a syringe. When combined with a force gauge and measurement stand, it allows for measurements in accordance with ISO standards. 【Features】 ■ Compatible with syringes (0.5 to 50 ml capacity) ■ Selection of insertion rings (4 types) according to the thickness of the syringe ■ Measurement partially compliant with ISO standards ISO 7886-1:2017 "Sterile hypodermic syringes for single use — Part 1: Syringes for manual use" partially compliant *For details, please check the basic information and PDF materials. 【You can try the product】 We have a laboratory where you can actually operate the product. Our technical staff will be present to provide reliable measurement solutions. 【Providing optimal load measurement solutions with 70 years of know-how】 Imada is a pioneering manufacturer of load measurement, having produced Japan's first force gauge in 1947. Trust Imada for all your load measurement needs.

  • Other measuring instruments

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Double-Opening Vice Jig 'GTW-2500N'

Double-Opening Vice Jig 'GTW-2500N'

Interchangeable jaw clamps! A double-opening vice fixture that can hold samples in the center.

The "GTW-2500N" is a vice for fixing samples on the vertical measurement stand. The main body is made of stainless steel and can accommodate measurements with magnetic properties. By changing the attachment direction of the jaws, it can be adapted for various measurements. It can attach up to six jaws, and by using custom jaws of different shapes, it can be utilized for a wider range of measurements. 【Features】 ■ Samples can be clamped in the center ■ The main body is made of stainless steel ■ Can accommodate measurements with magnetic properties ■ Jaws can be replaced *For more details, please refer to the PDF document or feel free to contact us.

  • Other measuring instruments

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Flat Compression Jig 'A-40/60 S-40/40-SL/60'

Flat Compression Jig 'A-40/60 S-40/40-SL/60'

It is possible to press the entire sample on the surface! A flat compression jig that can be used for a wide range of compression measurements.

The "A-40/60・S-40/40-SL/60" is a circular flat compression testing jig that can handle a maximum load of 1000N. It is suitable for compression tests such as measuring the crushing strength of tablets, as it can press the sample on a surface. You can choose the material (aluminum or steel) and dimensions (diameter of 40mm or 60mm) according to the load and application. Custom options are also available, including material changes, dimension changes, free joint designs, and designs for specified areas. 【Features】 ■ Usable for a wide range of compression measurements ■ Ideal for testing the crushing strength and buckling strength of sponge, rubber, and balls ■ Material (aluminum: A and steel: S) and diameter (40mm and 60mm) can be selected according to measurement needs ■ The S-40-SL, which has a slit for air escape, is optimal for measuring the buckling strength of PET bottles ■ Custom options are available for material changes, dimension changes, free joint designs, etc. *For more details, please refer to the PDF document or feel free to contact us.

  • Other measuring instruments

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
High Load Compression Test Fixture "PC Series (Disc Type)"

High Load Compression Test Fixture "PC Series (Disc Type)"

Magnetic type allows for easy attachment and detachment of the contact sensor! It can measure the pressure resistance of PET bottles and retort foods.

The "PC Series" is a disc-shaped compression testing jig that can accommodate a maximum load of 5000N. Thanks to its free joint design, which allows for a range of 15 degrees in all directions, it can closely contact the sample, enabling accurate measurements. It is suitable for compression tests such as pressure resistance tests for sealed packs of retort foods, hardness tests for balls, and buckling strength tests for PET bottles. 【Features】 ■ Suitable for high-load compression and destruction tests up to 5000N ■ Free joint design allows for better contact with the sample ■ Capable of measuring the pressure resistance of PET bottles and retort foods ■ The outer diameter of the disc can be selected from 40mm, 60mm, or 100mm according to the measurement sample ■ Customization is available to match the sample and measurement conditions *For more details, please refer to the PDF document or feel free to contact us.

  • Other measuring instruments
  • others

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Local Compression Fixture (Pin Gauge) "PG Series"

Local Compression Fixture (Pin Gauge) "PG Series"

Due to its small size and lightweight, it can also be used for measurements in low load and narrow spaces! The rod outer diameter can be selected from 2 to 5 mm.

The "PG Series" is a local compression fixture that supports a maximum load of 200N. It is suitable for penetration tests and hardness measurements over a fixed area, such as sponge hardness testing. Due to its small size and lightweight, it can also be used for measurements in low load and narrow spaces. 【Features】 ■ Compact and lightweight ■ Cylindrical fixture with a tip diameter of 2 to 5 mm ■ Ideal for penetration tests and hardness measurements over a fixed area ■ Usable in narrow spaces ■ Customization is available to match samples and measurement conditions *For more details, please refer to the PDF document or feel free to contact us.

  • Other measuring instruments
  • others

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Button Tension Test Fixture 'BC-15/PGC-BC'

Button Tension Test Fixture 'BC-15/PGC-BC'

Attach the sample with one touch! You can efficiently measure the sewing strength of clothing buttons.

The "BC-15/PGC-BC" is a tensile testing device used in conjunction to easily measure the sewing strength of buttons. Samples can be attached with a single touch, allowing for efficient measurement. It can accommodate a maximum load of 300N and can easily and accurately measure buttons with a maximum diameter of 15mm. 【Product Specifications (Excerpt)】 ■BC-15 (Button Fixing Fixture) 　・Weight: Approximately 1220g 　・Maximum Sample Diameter: φ15mm 　・Maximum Sample Height: 3.5mm ■PGC-BC (Button Tensile Fixture) 　・Weight: Approximately 125g 　・Hook Pass Hole: φ6 　・Opening Width: Maximum 20mm *For more details, please refer to the PDF document or feel free to contact us.

  • Other measuring instruments

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Securely fix the sample to the measurement stand! Vice fixture for load measurement.

Securely fix the sample to the measurement stand! Vice fixture for load measurement.

You can choose from a wide range of options! This is a vice fixture for securing samples, designed to be attached to the Imada measuring stand.

The GT series is a sample holding vice fixture used in combination with Imada-made force gauges (load measuring devices) and measurement stands. The Imada force gauges can achieve various load measurements through combinations with measurement stands and attachments. 【Features of the GT Series/GTW Series】 - A wide range of options is available for selection. - The lever-type single-opening vice fixture of the GT series comes in four different products based on jaw and maximum load differences. ■ For Imada measurement stands, please refer to the related products at the bottom of the page. ■ We also offer software that is convenient for graph creation and data analysis. For more details, please visit our website. * For more information, please refer to the PDF materials or feel free to contact us. * The GT-30 can also be purchased from Amazon (link below).

  • Other measuring instruments

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Vial Bottle Fixing Jig 'MED-VH-5N'

Vial Bottle Fixing Jig 'MED-VH-5N'

Ideal for puncture strength testing of elastomers sealing vials! Measurements compliant with certain ISO standards are possible!

The "MED-VH-5N" is a fixture for securing vials to a measurement stand. It can be used for testing the puncture resistance of the rubber stoppers on vials. It is compatible with all sizes of vials as specified in ISO8362-1 and ISO8362-4. The height of the holder and the position of the table can be adjusted to fit the size of the vial. 【Features】 ■ Enables testing of the puncture strength of the elastomer sealing the vial ■ The height of the holder and the position of the table can be adjusted to fit the size of the vial ■ Allows for measurements that partially comply with ISO standards We also offer fixtures for securing injection needles to force gauges by needle base. Luer fitting connection fixture MED-LFA-20N series - https://www.forcegauge.net/product/detail/med-lfa *For more details, please refer to the PDF document or feel free to contact us.

  • others

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

jigに関連する検索キーワード

COPYRIGHT © 2001-2025 IPROS CORPORATION ALL RIGHTS RESERVED.