hardware×高尾 - List of Manufacturers, Suppliers, Companies and Products

hardware Product List

1～15 item / All 29 items

Displayed results
Beam support hardware MH

Beam support hardware MH

It serves the role of six types of beam support hardware and is compatible with beam heights from 105mm to 450mm!

The "Beam Support Hardware MH" can be used by combining three types of beam support hardware, fulfilling the roles of six different beam support hardware types, and accommodating beam heights from 105mm to 450mm. The material is JIS G 3302 structural SGH400, with surface treatment of hot-dip galvanizing (Z27) and cationic electrodeposition coating. Additionally, we offer the "Beam Support Hardware MH (Joint Specification)" which is used to connect two Beam Support Hardware MH units with CB-20 for beam joint connections. 【Features】 ■ Beam Support Hardware MH - By combining three types of beam support hardware, it fulfills the roles of six different beam support hardware types. - Accommodates beam heights from 105mm to 450mm. ■ Beam Support Hardware MH (Joint Specification) - Used to connect two Beam Support Hardware MH units with CB-20 for beam joint connections. *For more details, please refer to the PDF document or feel free to contact us.

  • Support hardware/opening hardware

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Beam support hardware NB

Beam support hardware NB

Climbing beam brackets compatible with beams of 150mm to 360mm and roof slopes of 3.1 inches to 10 inches.

The "Beam Support Hardware NB" accommodates beam heights from 150mm to 360mm and roof slopes from 3.1 to 10 inches. *For roof slopes up to 3 inches, use the beam support hardware MH. The material is JIS G 3302 structural SGH400, and the surface treatment is hot-dip galvanized (Z27) and cationic electrodeposition coating. We offer "NB-90," as well as "NB-90G," "NB-120," and "NB-120G." 【Features】 ■ Accommodates beam heights from 150mm to 360mm and roof slopes from 3.1 to 10 inches ■ Material: JIS G 3302 structural SGH400 ■ Surface treatment: hot-dip galvanized (Z27), cationic electrodeposition coating *For more details, please refer to the PDF document or feel free to contact us.

  • Support hardware/opening hardware

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Main house / Beam support hardware for large beams MH

Main house / Beam support hardware for large beams MH

Main house and large beams! Surface treatment is hot-dip galvanized (Z27) and cationic electrodeposition coating.

The "Main Beam and Joist Connector MH" is used for the connection of 90mm square main beams and joists. *When using it for joists, if the joist level is -1mm to -48mm, please use the Japanese-style joist connector MO. The material is JIS G 3302 structural SGH400, and the surface treatment is hot-dip galvanized (Z27) and cationic electrodeposition coating. 【Features】 ■ Used for the connection of 90mm square main beams and joists ■ Material: JIS G 3302 structural SGH400 ■ Surface treatment: hot-dip galvanized (Z27), cationic electrodeposition coating *For more details, please refer to the PDF document or feel free to contact us.

  • Joints between components

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Hold-down corner for 10kN.

Hold-down corner for 10kN.

Jointing of horizontal members and columns, as well as horizontal member connections! Beam end hardware with a short-term allowable tensile strength of 13.5 kN.

The "Hold Down Corner for 10kN" is used for the connection between beams and columns, as well as between beams themselves. It can be installed even after the beams and columns have been constructed. During renovations, it allows for the connection between beams without the need for drilling holes for gusset bolts or making alterations to the exterior walls. 【Features】 ■ Short-term allowable tensile strength: 13.5kN ■ Used for the connection between beams and columns, as well as between beams ■ Can be installed even after the beams and columns have been constructed ■ No need for drilling holes for gusset bolts or making alterations to the exterior walls during renovations *For more details, please refer to the PDF materials or feel free to contact us.

  • Joints between components

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Double brace connector hardware

Double brace connector hardware

Equivalent certified product to Z-mark hardware (BP-2)! No need to notch the columns and horizontal members, allowing for the connection of brace ends.

The "double brace connector" is used when joining the ends of braces (wall strength factor of 2) that are 45mm x 90mm or larger. The screw-in parts for the base and columns are embossed, allowing for a good fit of the braces. Additionally, in the case of a true wall, the "folded part" is cut out by 60mm, so the connector is not exposed. 【Features】 ■ Embossed processing (screw-in parts for the base and columns) ■ No need to notch the columns or horizontal members, allowing for the joining of brace ends ■ Can be installed in any direction (up, down, left, right) ■ In the case of a true wall, the "folded part" is cut out by 60mm, preventing exposure of the connector ■ Certified equivalent to Z-mark hardware (BP-2) *For more details, please refer to the PDF document or feel free to contact us.

  • Joints between components

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
"Column Fit" brace connection hardware

"Column Fit" brace connection hardware

A brace joint hardware that allows for the connection of brace ends without the need to notch the horizontal member.

The "Column Fit" is used when connecting a 45mm x 90mm brace (with a wall strength ratio of 2) to a column. Since the standard dimensions of the hardware are symmetrical, it can be installed in any orientation—up, down, left, or right. Additionally, because screws for fastening to the horizontal members are not required, it can be installed even with floor panels in place. 【Features】 ■ No need to notch the horizontal members ■ No screws required for fastening to the horizontal members ■ Can be installed even with floor panels in place ■ Can be installed in any orientation—up, down, left, or right ■ Equivalent certified product to Z-mark hardware (BP-2) *For more details, please refer to the PDF materials or feel free to contact us.

  • Joints between components

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Double brace connector (plain)

Double brace connector (plain)

Quality performance tested! A brace connector with embossed processing that hides the screw heads.

The "Double Brace (Plain)" is used when joining the ends of braces that are 45mm x 90mm or larger (wall strength ratio 2 times). Even when installing braces on top of floor plywood, they can be fixed from the side (for floor plywood 28mm thick or less). The screw holes on the brace side are arranged to accommodate the angle of the brace. 【Features】 ■ Can be fixed from the side (for floor plywood 28mm thick or less) ■ Thin with a plate thickness of 1.2mm (conventional brace plates are 2.3mm) ■ The hardware has an embossed finish, so the screw heads do not protrude ■ The screw holes on the brace side can accommodate the angle of the brace ■ Product tested for quality performance by the Japan Building Materials Testing Center *For more details, please refer to the PDF document or feel free to contact us.

  • Joints between components

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Double brace for hardware construction.

Double brace for hardware construction.

Introduction of diagonal braces with standardized dimensions that are symmetrical and can be installed in any orientation.

The "Double Brace for Hardware Construction" has symmetrical standard dimensions, allowing it to be installed in any orientation—up, down, left, or right. It is used when joining the ends of braces that are 45mm×90mm or larger (with a wall strength ratio of 2). The main body of the hardware is attached to the five columns and horizontal members using dedicated square bit screws TBA-4 (8 pieces). 【Features】 ■ Usable for traditional construction methods ■ Surface treatment: Hot-dip galvanized steel plate (Z27) ■ Standard shear resistance per meter for brace walls: 3.37kN ■ The hardware has symmetrical standard dimensions, allowing installation in any orientation ■ Material: JIS G 3302 (hot-dip galvanized steel plate and steel strip) SGHC or SGCC *For more details, please refer to the PDF document or feel free to contact us.

  • Support hardware/opening hardware

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Column connection hardware "Column mounting plate"

Column connection hardware "Column mounting plate"

Introduction of column connection hardware for the joints between the sides of columns and horizontal members, as well as between beams and roof supports!

The "Column Mounting Plate" is used for the connection between the column in the middle passage and the side of the horizontal members, as well as the connection between the beam and the roof supports. Align the main body with the joint between the column and the side of the horizontal members. Please secure it with the dedicated square bit screw TBA-45 (6 pieces). For tightening the dedicated square bit screw TBA-45, please use the separately sold No. 3 square bit. 【Features】 ■ N value 0.2 or less ■ Material: JIS G 3302 (hot-dip galvanized steel sheet and steel strip) SGHC or SGCC ■ Surface treatment: hot-dip galvanized steel sheet (Z27) ■ Convenient for joining columns in the middle passage where horizontal members intersect in a cross shape ■ Equivalent certified product to Z-mark hardware (Kasuagai C) *For more details, please refer to the PDF materials or feel free to contact us.

  • Support hardware/opening hardware

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Column Joint Fitting "Small Corner II"

Column Joint Fitting "Small Corner II"

Improved construction efficiency compared to CP-L! This is a column connection hardware that makes it easy to construct vertical walls.

"Small Corner II" is used for the connection of columns and horizontal members. It has short-term standard joint strength, and since it only requires two screws on the horizontal member side and two on the column side with a 43mm screw, it improves construction efficiency compared to CP-L. This product has passed joint performance testing by House Plus Inspection Co., Ltd. 【Features】 ■ N-value of 0.66 or less ■ Improved construction efficiency compared to CP-L ■ Surface treatment: hot-dip galvanized steel sheet (Z27) ■ Easy installation of exterior walls as it is mounted on top of the horizontal member ■ Compact size with a width of 28mm and height of 47mm, allowing for easy installation ■ Material: JIS G 3302 (hot-dip galvanized steel sheet and steel strip) SGHC or SGCC *For more details, please refer to the PDF document or feel free to contact us.

  • Support hardware/opening hardware

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Column connection hardware "Small Corner II for floor plywood specification"

Column connection hardware "Small Corner II for floor plywood specification"

Compatible with thicknesses below 30mm! Installation efficiency with 4 screws. Can be installed over floor plywood.

The "Small Corner II Floor Plywood Specification" can be installed over the floor plywood without cutting it. By simply driving two 75mm screws into the horizontal member and two 43mm screws into the post side, construction efficiency can be improved. 【Features】 ■ N-value 0.81 or less ■ Short-term standard joint strength 4.3kN ■ Compatible with floor plywood up to 30mm thick ■ Product tested for joint performance by House Plus Inspection Co., Ltd. *For more details, please refer to the PDF document or feel free to contact us.

  • Support hardware/opening hardware

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Column connection hardware "Hook Corner"

Column connection hardware "Hook Corner"

Can be installed with 4 screws! Quick installation and easy work at heights.

The "Hook Corner" is a column joint hardware that corresponds to the announcement symbol (ha) with fewer screws and allows for speedy installation of hardware. It can be installed with just four screws, enhancing work efficiency. With dimensions of 30mm in width, 50mm in height, and a thickness of 1.6mm, the product is compact and can be installed neatly. By fixing the product to the column with temporary clips, working at heights becomes easier. 【Features】 ■ Compatible with corner columns ■ N value of 1.2 or less ■ Material: JIS G 3302 (hot-dip galvanized steel sheet) structural SGH490 ■ Surface treatment: hot-dip galvanized steel sheet (Z27) ■ Performance test (mid-column type) short-term standard joint strength: 6.7kN ■ Performance test (corner column type) short-term standard joint strength: 6.4kN *For more details, please refer to the PDF document or feel free to contact us.

  • Support hardware/opening hardware

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Japanese-style room large beam receiving hardware MO

Japanese-style room large beam receiving hardware MO

Support for 90mm and 105mm floor beams when they drop below the top of the horizontal members in Japanese-style rooms, etc.!

The "Large Beam Receiving Hardware MO for Japanese-style Rooms" is designed to accommodate large beams with dimensions of 90mm and 105mm when they are lower than the top of the horizontal members in Japanese-style rooms, etc. It is used when the beam level is between -1mm and -48mm. * For a beam level of 0mm, use the beam receiving hardware MH for rafters and large beams. The material is JIS G 3302 structural SGH400, and the surface treatment is hot-dip galvanized (Z27) and cationic electrodeposition coating. 【Features】 ■ Accommodates large beams of 90mm and 105mm when they are lower than the top of the horizontal members in Japanese-style rooms, etc. ■ Used when the beam level is between -1mm and -48mm ■ Material: JIS G 3302 structural SGH400 ■ Surface treatment: hot-dip galvanized (Z27), cationic electrodeposition coating * For more details, please refer to the PDF document or feel free to contact us.

  • Joints between components

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Base metal fitting CKB

Base metal fitting CKB

Used for the connection between the foundation and the column base! Lineup of "CKB-105" and "CKB-120".

The "Column Base Hardware CKB" is used for the connection between the foundation and the column base. *Please secure it with anchor bolts of strength grade 4.8 or higher. The surface treatment is JIS H 8641 hot-dip galvanized HDZ 35. We offer "CKB-105" and "CKB-120" in our lineup. 【Features】 ■ Used for the connection between the foundation and the column base ■ Material - Plate part (9mm-6mm): Equivalent to SPHC - Round bar part (φ21.7): Equivalent to 20CrMo - Dedicated washer: Equivalent to SPHC ■ Surface treatment: JIS H 8641 hot-dip galvanized HDZ 35 *For more details, please refer to the PDF document or feel free to contact us.

  • Joints between components

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Base metal fittings MCK

Base metal fittings MCK

Basic packing specifications! Introducing column base hardware that can be used for joining column bases.

The "Column Base Hardware MCK" is a type of column base hardware used for the connection of column bases, designed with a foundation packing specification. We offer a lineup including "MCK-105CN" with dimensions of 105×300×355mm, as well as "MCK-120CN," "MCK-105ST," and "MCK-120ST" with dimensions of 120×307.5×370mm. 【Features】 ■ Used for the connection of column bases ■ Foundation packing specification ■ Material - Base part (4.5mm thick): JIS G 3101 SS400 - Base part (3.2mm thick): JIS G 3131 SPHC - Pipe part (φ21.7): JIS G 4053 SCM415 - Washer part: JIS G 3101 SS400 ■ Surface treatment - Entire column base hardware: Cationic electrodeposition coating - Round washer: JIS H 8610 (electro-galvanized) and JIS H 8625 Ep-Fe/Zn8/CM2 C *For more details, please refer to the PDF document or feel free to contact us.

  • Joints between components

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Search Keywords Related to hardware

COPYRIGHT © 2001-2025 IPROS CORPORATION ALL RIGHTS RESERVED.