gate Product List and Ranking from 144 Manufacturers, Suppliers and Companies | IPROS

Last Updated： Aggregation Period:Feb 18, 2026～Mar 17, 2026
This ranking is based on the number of page views on our site.

gate Manufacturer, Suppliers and Company Rankings

Last Updated： Aggregation Period:Feb 18, 2026～Mar 17, 2026
This ranking is based on the number of page views on our site.

  1. 中部美化企業 Aichi//Building materials, supplies and fixtures manufacturers
  2. 鬼頭忠兵衛商店 Aichi//Building materials, supplies and fixtures manufacturers
  3. 三重重工業 本社 Mie//Building materials, supplies and fixtures manufacturers
  4. 4 応緑 (オーリョク) Hyogo//Other construction industries
  5. 5 NUC Electronics Co., Ltd. Tokyo//Facility Design Office
Go to Company Ranking

gate Product ranking

Last Updated： Aggregation Period:Feb 18, 2026～Mar 17, 2026
This ranking is based on the number of page views on our site.

  1. Data Center and Critical Facility: Anti-Terrorism Gate 'Guardian Gate' 応緑 (オーリョク)
  2. Water Gate "Corner Drop (MSL)" 三重重工業 本社
  3. KM-type Insertable PVC Simple Flap Gate 'KMGC Type' 鬼頭忠兵衛商店
  4. 4 KM-style Simple Flap Gate Series for Backflow Prevention 鬼頭忠兵衛商店
  5. 5 Simple Lift-Up Water Gate Slide Gate "CG Type" 中部美化企業

gate Product List

361～390 item / All 555 items

Displayed results
FIT GATE construction example: shutter gate + general gate + fence

FIT GATE construction example: shutter gate + general gate + fence

After installation, measure the exact dimensions to ensure it can be securely enclosed from the general door to the residential baseboard, and then proceed with manufacturing!

We would like to introduce a case where a shutter gate and a side gate were manufactured and delivered by FIT GATE as part of the renovation work around the entrance of a private residence in a certain location in Gifu Prefecture. Due to the height of the shutter gate, it was manufactured with a segmented structure, and as an option, rain gutters were installed on the back of the roof of both the shutter gate and the side gate to facilitate rainwater management. The eaves of the side gate are covered with wood-like siding, creating a design that connects with the residence. [Case Overview] ■ Shutter Gate: Approximately W3,900 × H3,125 mm ■ Side Gate: Approximately W2,850 × H2,640 mm ■ FIT HIGH-WALL: Approximately W3,820 (outer diagonal) × H2,350 mm *For more details, please refer to the related links or feel free to contact us.

  • Gates, walls and fences
  • Fences and gateposts
  • gate

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
FIT GATE construction example: shutter gate + general entrance + privacy wall

FIT GATE construction example: shutter gate + general entrance + privacy wall

It is possible to install a privacy wall without the need for a retaining wall and without narrowing the parking space!

We would like to introduce a case where two shutter gates, a service door, and a privacy wall were integrated into a single gate. Although it is a large structure, all parts were delivered to the site on the same day, and the assembly work was carried out. The height is 3,100mm, which is taller than the shutter gate, but because it is constructed with a steel frame, there is no need for supporting walls, allowing the privacy wall to be installed without narrowing the parking space. 【Case Overview】 ■ Total Length: Approximately W15,415 × H3,100mm ■ Shutter Gate: Approximately W15,235 × H2,925mm (Effective Opening: W5,660 × H2,385mm) ■ Privacy Wall (FIT HIGH-WALL): Approximately W7,300 × H3,100 × D130mm ■ Installation Time: 5.5 hours *For more details, please refer to the related links or feel free to contact us.

  • Gates, walls and fences
  • Fences and gateposts
  • gate

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
FIT GATE construction example: shutter gate + general gate 4

FIT GATE construction example: shutter gate + general gate 4

Designed for rainwater treatment through drains in a sloped roof! Introducing construction examples.

We have manufactured and delivered a large gate that integrates a shutter gate and a service entrance. Dimensions are approximately W13,000 × H2,925 mm, with an installation time of about 4 hours. Embedded products such as delivery boxes were installed in the factory using supplied materials, and due to the size of the large gate, it was manufactured in sections and assembled on-site. 【Case Overview】 ■ Dimensions: approximately W13,000 × H2,925 mm ■ Installation time: approximately 4 hours ■ Embedded products such as delivery boxes were installed in the factory using supplied materials ■ The height of the service entrance is set lower when viewed from the back ■ Designed to allow rainwater treatment through drains with a slab roof ■ Finished as a cohesive gate that fits the width of the site *For more details, please refer to the related links or feel free to contact us.

  • Gates, walls and fences
  • Fences and gateposts
  • gate

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
FIT GATE construction example: shutter gate + privacy wall 1

FIT GATE construction example: shutter gate + privacy wall 1

The integrated gate with aligned heights features a design that takes into account both flow and functionality!

We manufactured and delivered a gate that integrates a shutter gate and a privacy wall at a private residence in a certain location in Tokyo. The dimensions are approximately W8,250×H2,925mm, and the installation time was about 4 hours. Due to the large structure, the shutter gate and wall were manufactured separately and connected on-site. 【Project Overview】 ■ Dimensions: approximately W8,250×H2,925mm, installation time about 4 hours ■ Adopted a built-in type that conceals the shutter case from the property side ■ Finished as a simple and user-friendly gate *For more details, please refer to the related links or feel free to contact us.

  • Gates, walls and fences
  • Fences and gateposts
  • gate

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
FIT GATE construction example: shutter gate + privacy wall 2

FIT GATE construction example: shutter gate + privacy wall 2

Even with tall walls, it is possible to make effective use of space! Here are some construction examples.

We manufactured and delivered a gate that integrates a shutter gate with a tall wall at a private residence in Aichi Prefecture. The shutter gate and wall were divided into two parts for manufacturing and connected on-site. After the installation of the structure, finishing work was carried out by the contractor, completing the gate. The presence of the wall not only provides privacy for the entrance but also enhances the luxurious feel unique to large gates. 【Case Overview】 ■ Approximately W9,650 × H2,925 mm ■ Installation time was about 4 hours ■ Luxurious feel unique to large gates ■ Finished with a functional and stylish gate area ■ Even with a tall wall, space can be effectively utilized *For more details, please refer to the related links or feel free to contact us.

  • Gates, walls and fences
  • Fences and gateposts
  • gate

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
FIT GATE construction example: shutter gate + privacy wall 3

FIT GATE construction example: shutter gate + privacy wall 3

The wall extending to the back connects to the wing wall constructed with concrete blocks, creating a cohesive entrance area!

We would like to introduce a case where a gate that integrates a shutter gate and a privacy wall was manufactured and delivered. Due to the large size of the gate, the shutter gate and privacy wall were manufactured separately and connected on-site. After the installation of the structure, finishing work was carried out by the contractor. Ivory-colored tiles that matched the residence were applied, resulting in an elegantly finished gate. 【Case Overview】 ■ Approximately W8,140×H2,925mm (roof dimensions) ■ Installation time: About 5 hours ■ Finished with an elegant impression ■ A cohesive gate area *For more details, please refer to the related links or feel free to contact us.

  • Gates, walls and fences
  • Fences and gateposts
  • gate

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
FIT GATE Construction Example: Shutter Gate 3

FIT GATE Construction Example: Shutter Gate 3

Introduction of a case where work was carried out in an orderly manner and installation was completed in a short time.

We would like to introduce a case where we manufactured and delivered a shutter gate as an entrance to a parking space. In this instance, the shutter installation was arranged by the contractor, so we were only requested to provide the framework. After the framework was installed, the contractor completed the shutter installation and wall finishing to match the gate posts, resulting in a beautifully unified entrance area enhanced by greenery. 【Case Overview】 ■ Dimensions: Approximately W4,590 × H2,925 mm ■ Installation Time: Approximately 2 hours *For more details, please refer to the related links or feel free to contact us.

  • Gates, walls and fences
  • Fences and gateposts
  • gate

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
FIT GATE Construction Case: Shutter Gate 5

FIT GATE Construction Case: Shutter Gate 5

Introduction of a case where the roof of the shutter gate was made slightly larger at 150mm.

We would like to introduce a case where a shutter gate for two units was manufactured and delivered as a single unit FIT GATE. The dimensions are approximately W6,300 × H2,925 mm, and the installation time was about 3 hours. Normally, to allow for the carport roof to fit, the shutter gate's roof extends about 100 mm at the back, but this time we made it slightly larger at 150 mm. After the installation of the structure, finishing work such as tiling was carried out by the construction company. 【Case Overview】 ■ Dimensions: Approximately W6,300 × H2,925 mm ■ Installation Time: Approximately 3 hours *For more details, please refer to the related links or feel free to contact us.

  • Gates, walls and fences
  • Fences and gateposts
  • gate

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
FIT GATE Construction Example: Shutter Gate 7

FIT GATE Construction Example: Shutter Gate 7

Introduction of a construction case where columns and beams were manufactured separately and connected on-site.

We would like to introduce a case where a shutter gate, with a part of the beam extended to serve as a roof for the approach, was manufactured and delivered by FIT GATE. Since the effective opening height of the shutter is H2500mm, the columns and beams were manufactured in sections and connected on-site. The extended beam, serving as the roof, was designed to include optional rain gutters for rainwater management. After the installation of the structure, the contractor applied the finishing touches, combining it with a stylish functional gate post, resulting in a functional and fashionable gate. 【Case Overview】 ■ Dimensions: Approximately W8,685 × H3,225mm (total length) ■ Installation Time: Approximately 4 hours *For more details, please refer to the related links or feel free to contact us.

  • Gates, walls and fences
  • Fences and gateposts
  • gate

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
FIT GATE Construction Case: Shutter Gate 10

FIT GATE Construction Case: Shutter Gate 10

Introduction of a case where columns and beams were manufactured separately for a large gate and assembled on-site.

We would like to introduce a case where a shutter gate for two vehicles was manufactured and delivered by FIT GATE. Due to the large size of the gate, the columns and beams were manufactured in separate parts, and assembly work was carried out on-site. After the structure was installed, the contractor applied wall finishes and other work, completing the gate. Since privacy screens will be installed on both sides of the gate, we adjusted the design to accommodate the overhang of the steel frame base. 【Case Overview】 ■ Dimensions: Approximately W7,050 × H2,925 × D1,230 mm ■ Installation Time: Approximately 3.5 hours *For more details, please refer to the related links or feel free to contact us.

  • Gates, walls and fences
  • Fences and gateposts
  • gate

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
FIT GATE Construction Example: Shutter Gate 11

FIT GATE Construction Example: Shutter Gate 11

The protruding roof in front has been fitted with downlights supplied during manufacturing.

We would like to introduce a case where a shutter gate designed with variations in the eaves and column heights was manufactured and delivered by FIT GATE. Due to its height and depth, it was manufactured in sections and connected on-site. The downlights provided were installed during manufacturing on the protruding roof. After the installation of the structure, finishing work was carried out by the contractor, completing the area around the gate. 【Case Overview】 ■ Dimensions: Approximately W6,480 × H3,125 mm (Effective opening W5,760 × H2,300) ■ Installation time: Approximately 3.5 hours *For more details, please refer to the related links or feel free to contact us.

  • Gates, walls and fences
  • Fences and gateposts
  • gate

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
FIT GATE Construction Case: Shutter Gate 12

FIT GATE Construction Case: Shutter Gate 12

We will introduce a case where each building was manufactured as a single unit and connection work was carried out on-site.

We would like to introduce a case where a shutter gate with varying depth was manufactured and delivered by FIT GATE. Each unit was manufactured as a single unit and connected on-site. The front and back faces of each structure were aligned, creating a difference in depth. After the installation of the structure, finishing work was carried out by the contractor. Although it is a simple gate, the variation in depth creates a spacious entrance and parking area. 【Case Overview】 ■ Dimensions: Approximately W8,700 × H2,925 mm ■ Installation Time: Approximately 4.5 hours *For more details, please refer to the related links or feel free to contact us.

  • Gates, walls and fences
  • Fences and gateposts
  • gate

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
FIT GATE Construction Example: Shutter Gate 13

FIT GATE Construction Example: Shutter Gate 13

The pipe shutter is installed and shipped within the factory. Installation work will be carried out after arrival at the site.

Here is an example of a shutter gate manufactured and delivered as a single unit. The pipe shutter was installed in the factory and then shipped. It was brought in using a 4-ton crane truck, and installation work was carried out after arriving at the site. After the frame was installed, the finishing work was done by the contractor, and a gray paint was applied to match the residence, resulting in a cool-looking gate. 【Case Overview】 ■ Dimensions: Approximately W6,090 × H2,925 mm ■ Installation Time: Approximately 4.5 hours *For more details, please refer to the related links or feel free to contact us.

  • Gates, walls and fences
  • Fences and gateposts
  • gate

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
FIT GATE construction example: Shutter Gate 14

FIT GATE construction example: Shutter Gate 14

Introduction of a case where the body setup was divided into two days, with approximately 3 to 4 hours of setup each day.

This is an example of a shutter gate installed in a condominium, manufactured and delivered by FIT GATE. The installation of the framework was completed over two days, taking about 3 to 4 hours each day. After the framework installation, finishing work was carried out by the contractor, resulting in both buildings having a simple gate with a soft impression. [Case Overview] ■ Right Side [Shutter Gate + Passage Gate] - Approximately W7,370 × H3,075mm (at the highest point) - Effective opening of the shutter: Approximately W5,500 × H2,300mm ■ Left Side [Shutter Gate] - Approximately W5,790 × H3,075mm - Effective opening of the shutter: W5,200 × H2,300mm *For more details, please refer to the related links or feel free to contact us.

  • Gates, walls and fences
  • Fences and gateposts
  • gate

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
FIT GATE Construction Example: Shutter Gate 16

FIT GATE Construction Example: Shutter Gate 16

Introduction of a case where delivery was made directly to the site with one unit and installation was completed in a short time of about 2 hours.

We manufactured and delivered a FIT GATE to a private residence in a certain location in Tokyo. We installed the shutter in our factory and delivered a semi-finished structure with the base prepared as a single unit directly to the site, completing the installation in about 2 hours. After the structure was installed, the contractor carried out the finishing work, and the gate was completed. 【Case Overview】 ■ Dimensions: Approximately W5,850 × H2,925 mm (Effective opening of the shutter W5,260 × H2,300 mm) ■ Installation time: Approximately 2 hours *For more details, please refer to the related links or feel free to contact us.

  • Gates, walls and fences
  • Fences and gateposts
  • gate

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
FIT GATE construction example: Entrance gate for rental housing 1

FIT GATE construction example: Entrance gate for rental housing 1

Introduction of a case where only the column part extended from the right side of the roof was manufactured in sections and connected on-site.

We manufactured and delivered the entrance gate for the rental housing. The dimensions are approximately W8,720×H2,825mm (roof size), and the installation time was about 4 hours. Only the column part extended from the roof on the right side was manufactured in sections, and the connection work was done on-site. After the structure was installed, finishing work was carried out by the contractor, and the gate was completed. The presence of the entrance gate gives a stylish and luxurious impression. 【Case Overview】 ■ Dimensions: Approximately W8,720×H2,825mm (roof size) ■ Installation time: Approximately 4 hours *For more details, please refer to the related links or feel free to contact us.

  • Gates, walls and fences
  • Fences and gateposts
  • gate

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
FIT GATE Construction Example: Entrance Gate 2 for Rental Housing

FIT GATE Construction Example: Entrance Gate 2 for Rental Housing

The lattice material for the roof decoration and the downlights were installed during manufacturing along with the ceiling siding as supplied items!

Here is an example of a rental housing entrance gate manufactured and delivered by FIT GATE. The left column was manufactured in a section that is higher than the roof and connected on-site. The lattice material for the roof decoration and the downlights were installed during manufacturing along with the ceiling siding. After the structure was installed, finishing work was carried out by the contractor, completing the entrance gate. The arch gate divides the space, creating an elegant entrance. 【Case Overview】 ■ Dimensions: Approximately W7,875 × H3,715mm (total length) ■ Installation time: Approximately 3 hours *For more details, please refer to the related links or feel free to contact us.

  • Gates, walls and fences
  • Fences and gateposts
  • gate

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
FIT GATE construction example: General door + shutter gate 6

FIT GATE construction example: General door + shutter gate 6

Due to the large body, it is manufactured in parts! Electrical wiring for delivery boxes and lighting is installed within the factory.

We would like to introduce a case where a gate that integrates a standard door and a shutter gate was manufactured and delivered by FIT GATE. Due to the large structure, it was manufactured in segments and delivered using two 4-ton unic trucks. Downlights provided by the client were installed on the protruding part of the shutter gate beam and the standard door. Electrical wiring for delivery boxes and lighting was installed in the factory, and after the structure was set up, finishing work such as tiling was carried out by the construction company, completing the project. 【Case Overview】 ■ Dimensions: Approximately W9,300 (total length) × H2,925 mm (at the highest point) ■ Installation time: Approximately 3 hours *For more details, please refer to the related links or feel free to contact us.

  • Gates, walls and fences
  • Fences and gateposts
  • gate

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
FIT GATE construction example: General door + shutter gate 10

FIT GATE construction example: General door + shutter gate 10

The shutter gate is manufactured as a case exposure type! The roof of the passageway section is designed with GL steel plate roofing.

We would like to introduce a case where a passage gate and shutter gate were manufactured and delivered at FIT GATE. The passage gate and shutter gate were designed to fit within the eaves height of the residence and were manufactured and delivered as a single unit. After the structure was installed, finishing work was carried out by the contractor, and tiles were applied to the wall, highlighting the bright color of the wood-grain shutter. 【Case Overview】 ■ Dimensions: Approximately W6,050 × H2,635 mm ■ Installation Time: Approximately 6 hours *For more details, please refer to the related links or feel free to contact us.

  • Gates, walls and fences
  • gate

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
FIT GATE construction example: Shutter gate for a residential development

FIT GATE construction example: Shutter gate for a residential development

The left side is an elegant entrance, while the right side features a sharp entrance design!

Here is a case study of three shutter gates connected in a row at a residential development in Aichi Prefecture. The gates were manufactured in sections, and the assembly work was carried out on-site. By varying the finishing work, we achieved a sense of unity while creating gates that each have a distinct impression. Additionally, although the design of the two gates side by side is the same, by introducing variations in the exterior design, the left gate has an elegant appearance, while the right gate features a sharp design. [Case Overview] ■ Dimensions: Approximately W5,800 × H2,925 mm *For more details, please refer to the related links or feel free to contact us.

  • Gates, walls and fences
  • gate

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Slide gate

Slide gate

Slide gate

It is most suitable for small gates, featuring a structure where stainless steel plates are installed on the support parts of the door body and the stop, allowing it to slide. The opening and closing device uses a spindle type or a rack type hoist. The opening and closing mechanism can be designed and manufactured in electric, engine, or manual types. 【Features】 ○ Stainless steel plates are used on the sliding surfaces between the door body and the stop, as well as on the watertight rubber contact surfaces. ○ The watertight method ensures complete water sealing through watertight rubber. ○ In the case of four-sided watertightness, a wedge is installed to press the door body against the stop, ensuring complete watertightness even under low water pressure. ○ Side rollers or side shoes are installed on the sides of the door body to prevent lateral sway. ● For other functions and details, please contact us.

  • Hoist/Crane
  • Airport facilities
  • Steel construction
  • gate

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Arch plate type gate

Arch plate type gate

Arch plate type gate

It is an arch-shaped gate with a skin plate protruding on the water pressure side and a tensile member formed on the rear surface. Since the main girder is used as the main supporting member, it can significantly reduce weight compared to conventional sluice gates (simple beams with horizontal girders). 【Features】 ○ Cost reduction due to the reduction in the weight of the gate body. ○ By reducing the lifting load, a device one rank lower can be used for the opening and closing mechanism. Additionally, maintenance costs (such as electricity fees) can be saved. ○ The arch shape allows for thinner ends of the gate body, reducing the impact weight, and also minimizes the excavation required for civil engineering work, allowing for smaller support structures. ● For other functions and details, please contact us.

  • Watergate
  • Airport facilities
  • Metalwork
  • gate

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Automatic rising and falling gate, rear push-up type.

Automatic rising and falling gate, rear push-up type.

Automatic rising and falling gate, rear push-up type.

The door body is equipped with a hydraulic cylinder mounted on the vertical main beam, and the ends of the cylinder rods are each connected to the riverbed with hinge joints in a truss structure. 【Features】 ○ The hydraulic cylinder and hydraulic piping are installed within the door body area using fixed materials. ○ In the event of flooding or increased upstream water levels, the automatic tipping device allows for multi-stage tilting, preventing rapid increases in downstream water levels and ensuring safety. ○ If there is a slight increase in water levels during the intake period, the structure will tilt by the amount of the increase, maintaining the upstream water level almost constant without extreme reductions. ○ The door body, cylinder mounting frame, and side door stops are connected at the front, allowing for assembly and opening/closing tests at the factory, ensuring that a complete product is shipped. ● For other functions and details, please contact us.

  • Hoist/Crane
  • Airport facilities
  • Steel construction
  • gate

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Automatic rising and falling gate, torque arm type

Automatic rising and falling gate, torque arm type

Automatic rising and falling gate, torque arm type

A torque shaft is provided at the lower part of the door body, with torque arms and hydraulic cylinders arranged at both ends or one end, creating a structure that can stand upright or tilt. 【Features】 ○ Since the hydraulic cylinder is housed in a pit on the side, it is protected from damage to the cylinder rod caused by soil, rocks, etc. ○ The height difference upstream and downstream only needs to be the thickness of the door body, allowing for a smaller design. ○ The lower main beam uses steel pipes, ensuring a robust structure that prevents twisting when the door body stands upright or tilts. ○ The multi-stage tilting mechanism ensures complete water storage functionality while safely preventing rapid increases in water levels downstream during discharge. ● For other functions and details, please contact us.

  • Airport facilities
  • Steel construction
  • stone
  • gate

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Cross gate

Cross gate

Side pull gate

This is a gate installed at the entrances and exits to the interior of coastal levees and riverbank embankments. 【Features】 ○ The door body is equipped with wheels and opens and closes horizontally. ○ The door can be opened and closed manually, with a hand crank, or by engine power. ● For other functions and details, please contact us.

  • Airport facilities
  • River construction
  • Steel construction
  • gate

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Water gate "Sediment discharge gate / Slope drain gate / Pond plug"

Water gate "Sediment discharge gate / Slope drain gate / Pond plug"

Considering an excellent environment! Introducing the Mieregure water surface gate that can be used at water intake facilities.

A water intake facility is a structure used to draw water stored in a reservoir for agricultural land. It features an intake hole on a sloped pipe buried along the embankment, from which water is taken through the sloped pipe or directly from the reservoir, and directed to a bottom pipe installed at the base of the embankment for agricultural use. Our company handles various products, including "Sediment Discharge Gate (MSL)," "Sloped Pipe Gate (MSL)," and "Reservoir Stopper (MSN)." 【Sloped Pipe Gate (MSL) Features】 ■ Installed on the embankment slope ■ The number of intake holes can be set as needed, and the opening position can be adjusted according to the water level in the reservoir ■ Opening and closing operations are performed using a hoist installed at the top of the embankment *For more details, please refer to the PDF document or feel free to contact us.

  • image_01.png
  • image_03.png
  • image_04.png
  • image_05.png
  • Watergate
  • gate

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Water Gate "Screen (MSC)"

Water Gate "Screen (MSC)"

The materials include steel and stainless steel! Introducing Miegure's water surface gate, designed with excellent environmental considerations.

The "Screen (MSC)" is a gate designed to prevent floating debris in rivers from flowing downstream. It is possible to determine the bar pitch based on the size and type of debris being blocked. Materials include steel and stainless steel, but hot-dip galvanized steel is not commonly used when in constant contact with water due to issues related to electrolysis. 【Features】 ■ For general rivers and waterways ■ Prevents floating debris in rivers from flowing downstream ■ Determines bar pitch based on the size and type of debris ■ Materials include steel and stainless steel *For more details, please refer to the PDF document or feel free to contact us.

  • image_15.png
  • image_16.png
  • image_17.png
  • Watergate
  • gate

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Aluminum caster gate

Aluminum caster gate

Aluminum caster gate with a wide handle that is easy to grip.

We handle various sizes. You can choose products that meet your requirements. 【Features】 ○ Easy-to-grip wide handle ○ Six single pipe hooks included ○ Can be suspended from either the left or right ○ Space-saving for storage The products introduced are just a part of our offerings. We also handle many other construction-related items. Some products are available for lease as well. Please consult us for bulk orders. For more details, please download the catalog or contact us.

  • Flexible lattice door (folding gate)
  • Safety and consumables
  • gate

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Gate-type gate

Gate-type gate

We offer various sizes. You can choose products that meet your needs.

We offer various sizes. You can choose products that meet your requirements. 【Product Lineup】 ○ 2000mm high panel ○ 3000mm high panel ○ Sky panel gate The products introduced are just a part of our offerings. We also handle many other construction-related items. Some products are available for lease. Please consult us for bulk orders. For more details, please download the catalog or contact us.

  • Flexible lattice door (folding gate)
  • Safety and consumables
  • gate

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Wing Arm Type Automatic Ferry Gate

Wing Arm Type Automatic Ferry Gate

This is an automatic boat passage gate that adopts a level crossing type door opening and closing mechanism.

It is compatible with both solar-powered and commercial power sources. Due to significant cost reductions, it is recommended as a type of ferry gate that can replace traditional non-powered ferry gates. * Registered with the Ministry of Land, Infrastructure, Transport and Tourism NETIS KT-060133.

  • Tunnel construction
  • Airport facilities
  • River construction
  • gate

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Search Keywords Related to gate

COPYRIGHT © 2001-2026 IPROS CORPORATION ALL RIGHTS RESERVED.