Fence Sensor Controller (1CH) D7K-F10-1DC
Fence Sensor Controller (1CH) D7K-F10-1DC
For more details, please refer to the basic information.
- 企業:セキュリティハウス
- 価格:Other
16~30 件を表示 / 全 31 件
Fence Sensor Controller (1CH) D7K-F10-1DC
For more details, please refer to the basic information.
It is a fence sensor that detects intruders from the perimeter fence and performs security monitoring.
■Surface surveillance method monitoring the entire fence (net part) By adopting the surface surveillance method, more stringent security is possible. It is also an optimal sensor for dual surveillance use in conjunction with infrared sensors at critical facilities (such as power plants). ■Not affected by snow, dense fog, frost, etc. This sensor is ideal for installation locations where infrared surveillance is difficult. ■Simple hardware configuration The simple configuration allows for system construction tailored to customer requirements. ■Reduction of construction costs and shortening of construction period By simply securing the sensor cable directly to the fence with cable ties (included), costs are kept down, and the construction period is shortened.
Fence Sensor Controller (2CH) D7K-F10-2DC
For more details, please refer to the basic information.
A multifunctional security controller for corporate use, equipped with crime prevention controller and automatic reporting device functions, designed for tenant properties.
■Features ● Compact design that matches stores and offices. ● Supports not only voice notifications but also connections to IP lines for email notifications. ● Up to 5 locations can be set for voice notifications and 5 locations for email notifications. ● Security activation/deactivation can be performed using a dedicated FeliCa-compatible card reader. ● Tenants can operate security for up to 5 exclusive areas or 4 exclusive areas plus 1 shared area. ● Can connect 8 wired sensor circuits and up to 30 dedicated bus network sensors. ● Settings for security, emergency, fire, gas, urgent, and equipment abnormalities can be configured for each sensor. ● Equipped with a chime mode to notify of visitors. ● Can store and display up to 120 operation histories. ■Features of FeliCa-compatible Card Reader ● The card reader FC-151 for single tenants and the card reader TS-SC64C for multiple tenants can connect up to 10 units. ● It is possible to send an email indicating who activated/deactivated the security. ● Commercially available FeliCa cards can be registered, eliminating the need for a dedicated security card. ● Electric locks can be unlocked using card operations.
Sophisticated design, feature-rich card reader. Smart design that can be quickly set up and put into operation.
■FeliCa/Mifare/I-CODE Compatible Compatible with FeliCa/Mifare/I-CODE cards. Supports both fixed reading mode for each card and multi-read. ■Sophisticated Design Card Reader The compact ACS-DHR The ACS-BLR features a novel design that lights up blue around the area during card verification. The ACS-FMI has a sophisticated design that lights up entirely in blue during card verification. The ACS-TMR is a slim design card reader with a keypad. ■Feature-Rich Keypad Card Reader The keypad card reader ACS-TMR can operate with three verification methods: "Card only," "PIN only," and "Card + PIN." ■Protection Rating IPX5 The card readers ACS-DHR and ACS-BLR have a protection rating of IPX5, allowing them to be installed in locations exposed to direct rain, such as building exteriors.
Alert and reporting status is clear at a glance! A multi-channel controller with an integrated graphic panel.
■Main Features ● The warning area is indicated by a green LED and the alarm area is indicated by a flashing red LED on the graphic. ● It can be installed in a space-saving manner due to its integrated design. ● Changes to the map can be easily accommodated by replacing the sheet. ● Signal input can be switched to contact a, allowing it to be used for equipment monitoring as well. ● Simultaneous warning/cancellation, individual warning/cancellation, and simultaneous warning/cancellation via remote switch are possible. ● The remote switch is compatible with KE-502R.
tranSpeed Controller IDC2-E
■Features ● All RF components are integrated within the antenna unit, allowing for a 4-wire connection (2 wires for communication + 2 wires for power) with the controller. (No high-frequency cables or dedicated lines are required.) ● Up to two antennas can be connected to a single controller. ● Number of transponder registrations: 2000 entries ● Transponders do not use batteries. ● User authority management and history management for up to a 16-gate system can be performed using registration software. ● The ID data of the transponders is encrypted, so it will not react to all tags like systems using FA tags. ● With an output of 250mW, there is no need to apply for a specific radio station as a specific low-power radio equipment. * The card detection distance may be shorter depending on the surrounding environment of the antenna installation location and the conditions around the card. * If used with an output exceeding 250mW, an application as specific radio equipment is required.
Sophisticated design, feature-rich card reader with smart design that allows for immediate operation with simple setup.
■FeliCa/Mifare/I-CODE Compatible Compatible with FeliCa/Mifare/I-CODE cards. Supports both fixed reading mode for each card and multi-read mode. ■Sophisticated Design Card Reader The compact ACS-DHR features a novel design where the surroundings light up blue during card verification. The ACS-FMI has a refined design that lights up entirely in blue during card verification. The ACS-TMR is a slim design card reader with a keypad. ■Feature-Rich Keypad Card Reader The keypad card reader ACS-TMR can operate with three verification methods: "Card only," "PIN only," and "Card + PIN," allowing for mixed operations. ■Protection Rating IPX5 The card readers ACS-DHR and ACS-BLR have a protection rating of IPX5, making them suitable for installation in locations exposed to direct rain, such as building exteriors. ■Security Set/Reset By combining the optional security button unit [ACS-KBU] with the ACS-FMI, it can operate as a local security system.
Three-dimensional area stationary detection type safety switch for automatic doors.
■Features ●This safety sensor is ideal for ensuring safety with circular doors, as it has a three-dimensional area. ●With initial settings, the microcontroller automatically assesses the surrounding environment and the height of the sensor installation to establish a stable area. ●Radio waves, wind, and external noise are all automatically controlled by the microcontroller to eliminate false triggers. ●Temperature changes are also automatically corrected by the microcontroller, ensuring optimal operation at all times. *Please note that the monitoring operation starts with an external activation input (voltage-free contact), so it cannot be used as a security sensor or for automatic door activation. *Be cautious of the installation environment, as irregular walls may cause reflections that can reduce sensitivity.
Dedicated remote control for controllers C-603-2, C-606-2, and C-608RX.
■Remote operation is possible By connecting with C-603-2, C-606-2, or C-608RX, you can link the operations of alarm activation/deactivation, display of alarm channels, voice messages, and other displays. ■Password setting function You can set a password (freely configurable from 2 to 16 digits) using the numeric keypad. ■Communication function capable of connecting up to 4 devices The communication function allows for linked operation of multiple devices (up to 4 in addition to the controller). (Total wiring distance within 100m)
Host unit capable of remote control of the controller and saving various histories.
■Features ● By connecting to a controller with 2 or 3 remote inputs, this device allows for remote control and saves various histories. ● It records "when" and "which card" was used to perform the armed/disarmed actions. This helps identify the operator, deterring insider crimes. ● By connecting an optional reader unit (RU-1008), operations can be performed using dedicated cards from up to 8 locations. ● The user card registration can accommodate up to 1000 cards, and various histories can be stored up to 1500 entries, which are displayed on the LCD.
Monitor images with your smartphone or tablet! An IP image transmission controller that integrates security control, remote image monitoring, and control!
■Development of a smartphone-exclusive app Improved operability by using dedicated applications for iOS and Android. Compatible with iOS 7 and Android 4.3 or higher. ■Monitoring video on smartphones and tablets By connecting to an IP line, you can monitor camera footage from a remote location using a smartphone or computer. Up to 4 analog cameras can be connected. If there is no IP line, it is also possible to connect to a mobile router. *This controller is exclusively for analog cameras. Network cameras cannot be used. *We recommend using the iND manufactured mobile router, LM-200. *A fixed IP or a router with DDNS contract and settings is required. ■Remote operation via smartphone and tablet You can switch between and display 4 cameras. PTZ cameras can be operated remotely. *Compatible with our products "PTZ-812," "PTZ-830," "PTC-330," "PTZ-910AH," and "PTZ-920AH." However, only analog video can be used for the controller's alarm activation/deactivation operations. The telecon function allows for the operation of deterrent devices, lighting devices, electric locks, shutters, etc.
All-in-one model with sound intimidation + light intimidation + controller function (simple type)!!
■Features ●Ideal for simple security systems. By connecting various sensors to this unit, it deters intruders with sound and light. ●Uses high-brightness LEDs for the light source, providing excellent visibility and robustness against vibrations and impacts. ●Can operate solely with light (flashlight), making it versatile for alerting purposes. ●Rainproof design allows for outdoor installation. ●By connecting a two-way external remote switch, remote (wired) arming/disarming is possible. (Recommended product KE-500R) ●Delay timer function can be selected. *However, external signal input is required for arming/disarming operations. ●Two types of alarm sounds are available: siren type and voice type. Siren type: C-25A Voice type: C-35A Message: "An intrusion has occurred." ●Volume adjustment is possible via the alarm sound volume control. (Applicable to both C-25A and C-35A) ●During an alarm, memory operation via flashlight blinking is possible. ●A loop check of the sensors is performed when arming begins. (Door locking confirmation function)
All-in-one model with sound intimidation + light intimidation + controller function (simple type)!!
■Features ● Ideal for simple security systems. By connecting various sensors to this unit, it deters intruders with sound and light. ● It uses high-brightness LEDs for the light source, which not only enhances visibility but also makes it robust against vibrations and impacts. ● It can operate solely with light (flashlight), making it versatile for alerting purposes. ● It has a rainproof structure, allowing for outdoor installation. ● By connecting a two-way external remote switch, remote (wired) arming/disarming is possible. (Recommended product KE-500R) ● A delay timer function can be selected. *However, an external signal input is required for arming/disarming operations. ● Two types of alarm sounds are available: siren type and voice type. Siren type: C-25A Voice type: C-35A Message: "An intrusion has occurred." ● The alarm volume can be adjusted using the volume control. (Applicable to both C-25A and C-35A) ● During an alarm, memory operation is possible with flashlight blinking. ● A loop check of the sensors is performed at the start of arming. (Lock confirmation function) ● Power output function for sensors (DC12V200mA)
Alert and reporting status is clear at a glance! A multi-channel controller with an integrated graphic panel.
■Main Features ● The warning area is displayed in green LED lights on the graphic, while the alarm area is indicated by flashing red LED lights. ● It can be installed in a space-saving manner due to its integrated design. ● Changes to the map can be easily accommodated by replacing the sheet. ● Signal input can be switched to contact a, allowing it to be used for equipment monitoring. ● Simultaneous warning/cancellation, individual warning/cancellation, and simultaneous warning/cancellation via remote switch are possible. ● The remote switch is compatible with KE-502R.