Last Updated： Aggregation Period:Sep 17, 2025～Oct 14, 2025
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Sep 17, 2025～Oct 14, 2025
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Sep 17, 2025～Oct 14, 2025
This ranking is based on the number of page views on our site.
91～105 item / All 1415 items
A structure that is easy to insert fingers and easy to wire. Protection structure: IP67! Four new models released!
The terminal section is higher than the side wall, making it easier for fingers to access and facilitating wiring. Additionally, the cover surface is flat, allowing for the attachment of any nameplate.
Water and oil resistant "IP67" standard! With a compact structure of 120mm x 180mm, it can connect up to 16 sensor wires!
The JPBF180 series is equipped with a terminal block (TNS10) developed specifically for sensor line relays, allowing for the connection of up to 16 circuits in a compact design. Additionally, the dedicated terminal block (TNS10) features vertical single-column wiring, eliminating the hassle of complicated sensor line routing and making maintenance and replacement easy. 【Features】 ○ Capable of relaying up to 16 circuits of sensors! ○ Protective structure rated "IP67," offering excellent oil resistance and waterproofing! ○ A wide variety of options available, including hole processing and cable glands! ○ The terminal block uses three-tier terminals for vertical single-column wiring of sensor lines, three wires at a time! ○ The terminal block simplifies wiring tasks with one terminal per wire! *For more details, please contact us or download the PDF for more information.
Available at various facilities! Immediate response during power outages with mechanical emergency unlocking.
We would like to introduce the "Flora Keep Box" that we handle. With a sensor, voice guidance automatically starts when you approach. Thanks to high-performance memory, the ID is remembered indefinitely until power is restored after an outage. Fingerprint authentication with high-precision interface + RF-ID means no PIN code is used (limited to model PB-46FRF). 【Features】 ■ Double-check system ■ Keyless operation ■ Auto message ■ Reliable memory ■ Trouble response *For more details, please refer to the PDF document or feel free to contact us.
This is the interface box IM-A802 for the portable IP radio IM-530 and the microphone-type IP radio IM-860 manufactured by Mobile Create.
The IM-8A-003 (IM8A003) is an interface box IM-A802 for the IM-860 manufactured by Mobile Create. It is designed for the portable IP radio IM-530 and the microphone-type IP radio IM-860. By connecting the IM-530 and IM-860 to the interface box, functionality can be expanded, allowing for customization to suit business scenarios. Information can be shared through wireless communication between the IM-530 and IM-860. For extremely low-priced sales of earphone microphones, batteries, and more, please leave it to Excelli. For more details, feel free to contact us.
![[Data Presentation] Key Transfer Without Personnel: "IoT Key Management"](https://image.www.ipros.com/public/product/image/2e2/2000713569/IPROS24835568878226520131.png?w=280&h=280)
Achieving remote and non-face-to-face services with unattended key management!
Do you have any concerns about managing company vehicles and official vehicles? "I manage company and official vehicles on a whiteboard, but when plans change, it’s not updated, and I realize there’s no vehicle in the parking lot." "I use a paper logbook for operations, but it’s cumbersome to fill out, and I have trouble finding a place to store it." We can solve those concerns with our IoT key management solution! Our IoT key management solution provides a key box for unattended key handover along with a web system. ■ Reservation Management Since the system allows for reservation management, you can easily see available vehicles on your smartphone. You won’t have to go to the parking lot only to find there’s no vehicle. ■ Digital Transformation of Operation Management You can output the operation log as a PDF from the system, so you won’t have storage issues. Additionally, by analyzing usage data, you can optimize company and official vehicles, leading to cost reductions. ■ Lending When Not in Use You can lend out company and official vehicles during times they are not being used as car-sharing vehicles, allowing you to generate revenue.
Large box of Miyajima using a 1140mm x 1140mm pallet! Since it is a standard product, it can be delivered in a short time!
A four-sided integrated frame of heat-welded PP (twin cone). It is a lightweight and easy-to-handle type. The items are loaded and unloaded through the opening at the top of the front panel.
The trending "delivery box" with a large capacity! Compact storage when not in use!
Do you have these worries? Concerned about the contents getting wet in the rain? Afraid it might get stolen? A large delivery box is a hassle? Electronic ones are expensive. Foldable delivery box for "leave it at the door" use, TB series. Large capacity! Compact storage when not in use! Recommended for apartment owners! For distribution to residents, No management fees, Also prevents theft. *Lock sold separately as an option.
Your palette transforms into a large box! A box that requires no special installation work with special tools!
The box size can be custom-made to fit the dimensions of your pallet. It becomes a box simply by placing the frame on the pallet. No special installation work with special tools is required. When folded, the frame can be stored inside the lid, allowing for stacking. This contributes to the effective use of warehouse space. 【Features】 ■ Frame and lid added box *Pallet not included. ■ Compatible with both single-sided and double-sided pallets. ■ Frame has aluminum hinges on two sides. ■ When folded, the frame can be stored in the lid and stacking is possible. ■ Load capacity of 2000 kg (when using a 1100 x 1100 x 150H pallet). ★ New options added ★ ■ New lineup of strong lids In addition to the standard resin frame type, a stronger aluminum frame type has been introduced. ■ Transparent panel for the frame *Not completely transparent. In addition to the conventional plastic corrugated board, a transparent panel option has been added to allow visibility of the contents inside the container. *Free samples for the 1111 pallet are also available for loan. *For more details, please refer to the PDF materials or feel free to contact us.
With a 'grip tab'! It won't slip even when using an impact driver, allowing for reliable work!
The "Lightweight Box" is a slide box that is easy to install on lightweight studs (lightweight steel). It comes with a "holding flange" that can be securely held with one hand. It does not slip when using an impact driver, allowing for reliable work. *The flange is removed after securing. 【Features】 ■ Easy to install on lightweight studs (lightweight steel) ■ Comes with a "holding flange" that can be securely held with one hand ■ Does not slip when using an impact driver, allowing for reliable work *For more details, please refer to the PDF document or feel free to contact us.
Keep the area around the EV charger tidy!
This is a wall box ideal for home EV charging, capable of storing EV charging guns and EV outlets. *With the wiring spacer, the thickness of the wiring can be elevated, making it easy to install the equipment. It features a neat design suitable for permanent installation! It has an IP44 rating, making it resistant to wind and rain! At an affordable price, the area around the EV charger stays tidy. Since outlets are not exposed, it enhances security and safety. It is perfect for locations where installing large devices or boxes is difficult.
![PVK Design Box [Rainproof type convenient for outdoor use]](https://image.www.ipros.com/public/product/image/b9b/2001513070/IPROS12725142620918229815.png?w=280&h=280)
It's a stylish new design that won't compromise the atmosphere or aesthetics of the building! It's a rainproof type that's convenient for outdoor use!
The "PVK Design Box" is a product used to facilitate the entry and branching of wires and cables into numerous electrical conduits. It is convenient for outdoor use with its rainproof design (IPX6). The stylish new design does not compromise the atmosphere or aesthetics of the building. It features a smart design with no visible seam between the box and the lid. [Colors] ■ Beige ■ Milky White ■ Matte Black ■ Matte Silver *For more details, please download the PDF or feel free to contact us.
Ideal for the daily transport of inspection drugs, reagents, pharmaceuticals, specimens, and for short-distance transport within hospitals and research buildings!
- We also offer proposals for temperature-controlled transportation using cold packs and heat-retaining materials. - The belt can be freely adjusted from a length suitable for hand carrying to a maximum of about 1 meter. - The belt can be removed, allowing for use in transportation other than hand carrying.
Ideal for the daily transport of inspection drugs, reagents, pharmaceuticals, and specimens, as well as for short-distance transport within hospitals and research facilities!
We also offer proposals for temperature-controlled transportation using cold packs and heat-retaining materials. The belt can be freely adjusted from a length suitable for hand carrying to a maximum of about 1 meter. The belt can be removed, allowing for use in transportation other than hand carrying.
250 x 180 x 140 mm, board thickness 5 mm, weight 800 g/m², various colors, made in Japan, convenient for delivery by courier! Also suitable as a return box!
The Plaita BOX is manufactured domestically in Japan, from the board to the finished product. In addition to standard sizes, we can also process custom sizes according to your needs. The standard Plaita BOX has a board thickness of 50mm and a weight of 800g/m². We are confident in its strength and durability. For custom sizes, please contact us separately, and we will design and manufacture according to your requirements. Rivets This Plaita BOX is fastened with plastic rivets. We can also accommodate metal rivets or heat sealing upon request. Partition boards and bottom boards To reinforce the Plaita BOX, we can produce partition boards and bottom boards according to your needs. This is effective when the size increases or when placing heavy items inside.
200x200x200mm, thickness 5mm, weight 800g/m2, available in various colors, made in Japan, cube type, can also be used as a shipping box!
The Plaita BOX is manufactured in Japan from board to product. In addition to standard sizes, we can also process to custom sizes as per your request. The standard Plaita BOX has a board thickness of 50mm and a weight of 800g/m². We are confident in its strength and durability. For custom sizes, please contact us separately, and we will design and manufacture according to your needs. Rivets This Plaita BOX is fastened with plastic rivets. We can also accommodate metal rivets or heat sealing upon request. Partition boards and bottom boards To reinforce the Plaita BOX, we can manufacture partition boards and bottom boards according to your needs. This is effective when the size increases or when placing heavy items inside.
