Last Updated： Aggregation Period:Jul 16, 2025～Aug 12, 2025
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Jul 16, 2025～Aug 12, 2025
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Jul 16, 2025～Aug 12, 2025
This ranking is based on the number of page views on our site.
16～30 item / All 37 items
The Funnel Clay Meter S-251 is a simple flow-type viscometer for muddy water, used to measure funnel viscosity.
***Features*** It is a flow-type viscometer that can be easily used on-site and displays the viscosity as funnel viscosity.
It is useful for managing the flow properties of inks and adhesives, and measures the spreading rate of a sample between two parallel plates.
○Capacity: 0.5ml ○Plate weight: 115g (acrylic plate) ○Reference standards: JIS K 5101, K 5701 *Option: Load plate (glass plate)
This is a viscometer for measuring the viscosity and yield value of ink.
The viscosity is determined from the descent speed of the rod when a sample is filled between a ring and a rod with a certain gap, and the rod is pressed with a constant force.
The Funnel Clay Meter S-251 is a simple flow-type clay meter for muddy water, used to measure funnel viscosity.
It can be easily used on-site with a flow-type viscometer and is displayed as funnel viscosity. The container capacity is 500cc.
It is a micro viscometer that can measure with approximately 100 μl of sample.
It is compact in size and convenient for carrying. Cost reduction in research and development expenses due to savings on raw materials and sample disposal costs, as well as cost savings from sample reduction in lot inspections of incoming raw materials and products, is also expected. Please select one type from the options below using the sensor: - For low viscosity (HA01-01) 0.2 – 100 mPa.s - For medium viscosity (HB02-01) 80 – 5,000 mPa.s - For high viscosity (HC02-01) 400 – 20,000 mPa.s
The measurement unit can be raised and lowered manually! It can accommodate sample cans of various sizes.
This product is a type of automatic Krebs viscometer that measures the viscosity of liquids digitally and allows for manual operation to raise and lower the measuring unit. Its basic performance is similar to the 087 automatic Krebs viscometer, but it can accommodate various sizes of sample cans by manually raising and lowering the measuring unit using the handle on the right side of the main body. The product comes with a sample can holder, allowing it to be used with smaller sample cans. 【Features】 ■ Manual operation to raise and lower the measuring unit ■ Compatible with various sizes of sample cans ■ Comes with a sample can holder ■ Can be used with smaller sample cans *For more details, please refer to the related link page or feel free to contact us.
The motor rotates automatically, and the measurement results are output as calculated values without a conversion table!
The "Bikobisk DS" is a rotational viscometer that can output digital values for Krebs units (KU), centipoise (cP), and grams (gm). It complies with ASTM D562 and calculates viscosity values instantly at a constant rotation speed of 200 rpm. Measurements are taken without the use of weights or stopwatches; simply lowering the stand lever automatically activates the motor, and the measurement results are output as calculated values without the need for a conversion table. 【Features】 ■ Automatic rotation speed control system driven by a motor ■ Displays in KU, centipoise, and gram units ■ User-friendly operation that starts measurement just by lowering the stand lever ■ Base accessory compatible with quart, pint, and 1/2 pint containers ■ Can be calibrated with NIST standard viscosity oil *For more details, please refer to the PDF document or feel free to contact us.
A new method that changes the common understanding of viscometers: Providing pioneering viscosity measurement technology in an easy-to-use form.
The EMS viscometer is an innovative viscometer that has changed the conventional wisdom of viscosity measurement with its world-first new method. By utilizing the force of a magnetic field to remotely apply torque to a spherical probe within the sample container from the outside, it has successfully achieved complete separation of the sample from the device. It offers cutting-edge viscosity analysis technology through user-friendly software and selectable spherical probes based on sample characteristics, enabling applications across a wide range of fields. It also accommodates measurements of small quantities and low viscosity, which have been difficult to measure until now. This product incorporates some of the development results obtained as part of the JST Advanced Measurement and Analysis Technology and Equipment Development Program. (National University Corporation, The University of Tokyo Patent No. 5093599, US 8,365,582 B2)
独自の技術で使いやすい粘度計を提供
１．簡単測定 先端(検出端子)を液体に浸すだけで測定できます。 ２．少量測定 容器を工夫すれば最小量2～3mlでも測定できます。 ３．簡単清掃 検出端子の回りに付着した液体を拭き取るだけで、次の測定ができます。 ４．容器を選びません 検出端子の周辺の微量な液体の粘度を測定しているため、容器の大きさ、形状による制限は有りません。 ５．液体の実態を測定 撹拌有り、無しどの状態でも測定できます。液体のありのままの状態を測定できるので、液体の不均一さの測定にも 利用できます。
The reaction torque is directly mounted on the drive system! The temperature is monitored by a PT100 thermocouple.
The "V-MV 3000" is a Mooney viscometer that tests rubber compounds at rotor speeds ranging from 0 to 50 rpm. The device is designed for direct control via a PC, with test control, data collection, and analysis conducted using the included "MonControl" software. The device comes with two calibration weights, allowing for complete device calibration through the "MonControl" software. 【Features】 ■ Improvement of defective products and yield ■ Increased efficiency of processing processes ■ Shortening and simplifying the development cycle ■ Analysis software: intuitive and simple operability ■ No prior sample processing required *For more details, please refer to the PDF document or feel free to contact us.
Explosion-proof specifications of a viscometer that accurately measures liquid viscosity in-line using ultrasonic vibrations.
This is an explosion-proof viscosity meter that can measure the viscosity of liquids with high precision in-line using ultrasonic vibrations. It features a transmitter with no moving parts and external outputs, making it suitable for in-line measurement. When a vibrating element (viscosity sensor) is placed in the liquid and vibrated, the amplitude of the sensor's vibrations is suppressed and decreases due to the viscous resistance of the liquid, which increases with the viscosity of the liquid. This device increases the input power to overcome this suppressed force using a constant amplitude circuit, and by measuring the input energy at this time, it accurately measures the liquid viscosity. For more details, please contact us or refer to the catalog.
A viscometer that can measure liquid viscosity with high precision in-line using ultrasonic vibrations.
A viscometer without a drive unit, suitable for inline measurement. Excellent maintainability and reduced running costs. For more details, please contact us or refer to the catalog.
JIS-compliant product for measuring the viscosity of oils, resin solutions, paints, varnishes, etc.
The "Flow Cup No. 3, 4, 5, 6" is a viscometer that measures viscosity based on flow time. It is capable of measuring the viscosity of oils, resin solutions, paints, varnishes, and more. It complies with JIS K 5600-2-2 and ISO 2431 standards. A storage case, glass plate, and level are included, and a dedicated stand can also be provided as an option. 【Features】 ■ Measures viscosity based on flow time ■ Suitable for viscosity of oils, resin solutions, paints, varnishes, etc. ■ JIS compliant product *For more details, please refer to the PDF document or feel free to contact us.
Easy to use on-site.
This is a notice from Rex Co., Ltd. regarding the "Funnel Viscometer S-251."
