Last Updated： Aggregation Period:Jul 16, 2025～Aug 12, 2025
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Jul 16, 2025～Aug 12, 2025
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Jul 16, 2025～Aug 12, 2025
This ranking is based on the number of page views on our site.
16～30 item / All 42 items
By simply immersing the sensor in water, you can easily measure the turbidity of rivers, lakes, dams, agricultural water, industrial water, and drainage!
The measurement results can be displayed in either NTU or mg/L units, and it can store up to 100 data points!
Directly immerse it on-site to measure turbidity in real time!
The measurement range is 0 to 500 mg/l, and there are types with cable lengths of 10m and 30m. There is also a high concentration type with a measurement range of 200 to 2,000 mg/l.
By simply immersing the sensor in water, it easily measures the turbidity of rivers, lakes, dams, agricultural water, cooperative water, and drainage.
***Features*** - No sampling required The sensor is of the type that is directly immersed in the water being tested. Sampling of the test water is not necessary. - Compact sensor Both the diameter and weight have been slimmed down to half compared to conventional models. - Simultaneous measurement/display of turbidity and temperature The liquid temperature is displayed simultaneously on the LCD display. - Supports switching between NTU and mg/L units Measurements can be displayed in either unit by switching. - One-touch calibration Zero turbidity calibration can be done simply by immersing the sensor in pure water and pressing the calibration key. - Data memory function for 100 measurements Data measured in the field can be checked in the office or elsewhere. - Correction coefficient setting function If you want to correct turbidity measurement values to match conventional data, you can do so by setting the span coefficient. - Drip-proof structure (main unit) Can be used even on rainy days.
This is a turbidity meter using an integrating sphere scattering light method. The collected sample water is placed in a dedicated cell for measurement.
***Features*** In the analysis of wastewater quality, the measurement of SS (suspended solids) is considered important alongside BOD and COD. Traditional hand analysis for SS measurement is time-consuming, prone to individual errors, and complicated in operation. This device can measure SS quickly, easily, and with high precision, displaying results digitally. The measurement of suspended solids (SS) using an integrating sphere scattering photometry method is a direct method that does not require the filtration, heating, and weight measurement operations needed in the weight method (JIS method). It can measure both SS and turbidity with a single device. There is no need for complicated operations, and it allows for a wide range (2 range switching) of SS measurements. Since it uses an integrating sphere method, it is not affected by the color of the sample. The amount of sample required for measurement is small. It is easy to operate and compact. It is compatible with both AC and DC, and comes with a charger that includes an AC adapter. It also includes a portable case for convenient transport.
Ideal for long-term measurement.
- Ideal for long-term measurement - Compact outdoor installation type - Usable in various situations for drainage and water supply We propose an optimal system with high expandability - Rotating light alarm system (notifies abnormalities with sound and light) - Email notification system (notifies abnormalities via email) - Cloud system (remote monitoring and recording via the cloud)
![Portable Turbidity Meter 'TB-25A' [Rental]](https://image.www.ipros.com/public/product/image/1c0/2000454618/IPROS10298209795844832170.jpeg?w=280&h=280)
Turbidity measurements in the field can be easily performed. A sensor is attached to the end of the cable, which can be thrown into the water to be measured for real-time measurements.
■ No sampling required The sensor is of the type that is directly immersed in the water being tested, so sampling is not necessary. ■ Compact sensor Slimmed down to half the diameter and weight compared to conventional types. ■ Simultaneous measurement/display of turbidity and temperature The LCD display shows the operating status, measurement values, units, and more all at once. ■ Supports switching between NTU and mg/L units Measurements can be displayed in either unit by switching. ■ Data memory function for 100 measurements Data measured in the field can be checked in the office or elsewhere. ■ Correction factor setting function If you want to correct the turbidity measurement values to match conventional data, you can set the turbidity span coefficient from 0.50 to 1.00 in increments of 0.01.
![Integral sphere type SS turbidity meter "ST-100 model" [Rental]](https://image.www.ipros.com/public/product/image/601/2000454632/IPROS41384847960492955026.jpeg?w=280&h=280)
This is a measurement method that allows for a quick and simple estimation of SS based on turbidity conversion.
■ Easy to operate and compact ■ Can measure SS quickly and accurately with digital display ■ Can measure both SS and turbidity with one device
Low concentration, high sensitivity with a resolution of 0.001! Both polystyrene turbidity and formalin turbidity can be measured.
The "TR-5500" is a high-sensitivity turbidity meter with a three-range switchable transmission output that uses laser scattering light. The laser light detector, which has minimal stray light, measures trace turbidity with a high sensitivity of 0.001. It can measure both polystyrene turbidity and formaldehyde turbidity. It is equipped with an easy and reliable zero calibration function, along with a feature to check for detector malfunctions and calibration quality. 【Features】 ■ Laser scattering light type, high-sensitivity detector ■ Three-range switchable transmission output ■ Capable of measuring both polystyrene turbidity and formaldehyde turbidity ■ Easy and reliable zero calibration function and span calibration function *For more details, please refer to the PDF document or feel free to contact us.
Equipped with an electronic dehumidifier, dirt detection monitor, and laser light source output monitor as standard!
The NP6000V is a high-sensitivity turbidity meter capable of continuously monitoring turbidity and particle counts in filtered water, membrane treatment, and distribution in water treatment plants and similar environments. It can measure particle sizes from 0.5 μm. It features six channels that take into account the sizes of Cryptosporidium and Giardia. It is suitable for the "Guidelines for Measures Against Cryptosporidium in Drinking Water" issued by the Ministry of Health, Labour and Welfare. 【Features】 - Capable of simultaneously and continuously monitoring turbidity and particle counts in filtered water, membrane treatment, and distribution in water treatment plants. - Measures particle sizes starting from 0.5 μm. - Six channels designed to consider the sizes of Cryptosporidium and Giardia. - Equipped with an electronic dehumidifier, contamination detection monitor, and laser light source output monitor as standard. - Optional automatic cleaning function for chemical solutions can be added. *For more details, please refer to the PDF document or feel free to contact us.
Realizing simple turbidity measurement in the field with immersion-type sensors.
■Features ●Improved reliability in low concentration range The repeatability in the low measurement range has significantly improved to ±0.5 NTU compared to our conventional products. ●Power-saving design It can continuously measure for approximately 120 hours using two AA alkaline batteries. ●Easy monitoring with immersion measurement The sensor can be directly immersed in the sample water for measurement. It can be used for turbidity monitoring over a short period (within 24 hours). *This sensor does not have a cleaning function. Continuous measurement may be limited depending on water quality and usage conditions. *Continuous measurement at depths of 10 meters or more is not recommended. ●Memory function for 1000 data points Automatic memory at regular intervals is also possible. *Short interval memory function: 1 second to 99 minutes 59 seconds or Long interval memory function: 2 minutes to 99 hours 59 minutes (In the long interval memory function, the power will be OFF (sleep mode) after one minute of measurement until the next measurement.) ●Excellent expandability (Connectable to computers, external printers, recorders, etc.) We provide dedicated data collection software to import measurement data into a computer in text format.
The turbidity meter MI1AB-10RS is a high-precision and high-resolution turbidity meter.
We use a transmission scattering comparison method with an infrared light source.
It demonstrates its accuracy and reliability in measuring low turbidity (below 0.05 NTU).
It employs a state-of-the-art optical system and a tungsten light source based on the planning of the EPA (U.S. Environmental Protection Agency), demonstrating its accuracy and reliability, particularly in measuring low concentrations of turbidity (below 0.05 NTU). Additionally, it allows for the recording of various measurements on-site using a tag identification device and verification of calibration status through GLP functions.
The turbidity meter MI1P-526M is an easy-to-operate turbidity meter that supports measurements in the range of 0.01 to 1,000 FNU, thanks to its automatic calibration solution recognition correction.
The turbidity meter MI1P-526M is an easy-to-use device that supports measurements in the range of 0.01 to 1,000 FNU, thanks to its automatic calibration solution recognition correction. It uses a high-emission infrared LED as the light source and performs accurate measurements in about 8 seconds using a 90° transmitted scattered light method.
Over 55,000 sets used worldwide for more than 20 years, inline process analyzers (UV meters / colorimeters / turbidimeters).
We will be exhibiting our process analyzer that enables real-time monitoring at the "Sustainable Plant EXPO"! At our booth during the upcoming "Sustainable Plant EXPO," we will be presenting our "inline process analyzers" for industries such as chemical manufacturing, pharmaceuticals, and food production. If you are interested in inline measurement, please feel free to stop by our booth. We look forward to welcoming you all. Event Date: July 24, 2024 (Wednesday) - July 26, 2024 (Friday) Time: 10:00 AM - 5:00 PM Venue: Tokyo Big Sight, East Hall 7 Booth No: 7B-02 Participation Fee: Free However, prior registration is required. [Features] ■ Real-time measurement and monitoring ■ Quality control and uniformity ■ Quantification of "appearance" color and turbidity ■ Reduction of management costs ■ Compatible with pH and conductivity measurements ■ Support for certain gases is also possible For more details, please refer to the catalog or feel free to contact us.
Just flow the sample liquid for immediate measurement! An ultra-high sensitivity turbidity meter using scattered light method capable of measuring submicron particles.
This is an ultra-high sensitivity turbidity meter that improves upon the laser scattering method, where the light emitted from a semiconductor laser passes through the sample water and a focusing lens, and intensity calculation processing is performed at the receiving section. It accurately measures turbidity in sample liquids such as drinking water, membrane-filtered water, or pool water. 【Features】 ● Immediate measurement and display by simply flowing the sample liquid online ● Effective for monitoring contamination by Cryptosporidium ● Clean structure that is less affected by cell contamination *For more details, please refer to the materials. Feel free to contact us with any inquiries.
