Transceiver Product List and Ranking from 88 Manufacturers, Suppliers and Companies

GPS device IM-830 that can determine location anywhere in the country

A small GPS device for the Mobaroque dynamic management system manufactured by Mobile Create, capable of long-term management of GPS locations other than vehicles.

The IM-830 (IM830) is a GPS device manufactured by Mobile Create. It is a compact GPS terminal for the dynamic management system Mobaroke. Since it does not have the functionality of a voice radio, it can be introduced at a low cost. The IM-830 regularly sends location information at intervals as short as one second, allowing real-time confirmation of location information on a map. It can be powered via USB or a cigarette lighter, so installation in a vehicle is not required. It supports a cigarette charger for DC12V / 24V and USB power for DC5V. By using it in conjunction with a mobile battery, it can be used for extended periods, allowing for long-term management of GPS locations beyond just vehicles. It can be used with just one device. For more details, please feel free to contact us.

Company：エクセリ本社
Price：Other

others
Transceiver

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[For Work Communication] Specific Low Power Transceiver IC-MS5880#11

A simultaneous communication type transceiver that is effective in work sites where precise instructions and timing are crucial, such as crane operations.

The IC-MS5880#11 is a parent unit of a simultaneous communication type transceiver for work communication manufactured by Icom. It is a specific low-power transceiver. It supports hands-free simultaneous communication and multi-party communication. 1. Up to 9 parties can communicate simultaneously: 2 IC-MS5880 units and 8 IC-5880 units. 2. Up to 5 parties can communicate simultaneously: 1 IC-MS5880 unit and 4 IC-5880 units. Area expansion is possible. 1. By connecting the line compensator AG-5880 to the IC-MS5880, an area expansion of up to 50m can be achieved, and by connecting up to 3 AG-5880 units, a total area expansion of over 150m allows for simultaneous communication with IC-5880 units. 2. By connecting VE-PG4 to the IC-MS5880 and linking it to an IP network, simultaneous communication between IC-5880 units in separate buildings can be achieved. 3. Using VE-PG4 to connect to IP telephony allows for group calls or simultaneous communication with IC-5880 units from office telephones, reducing the effort for office communication and phone responses. The IC-MS5880 has the following communication modes: 1. Simultaneous communication mode 2. PTT transmission mode 3. Repeater operation mode 4. Transmission prohibition mode 5. Auto channel mode

Company：エクセリ本社
Price：Other

others
Transceiver

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[No license or qualifications required] Digital guide system receiver DJ-RX80

A digital guide system receiver that can use 28 channels, ideal for operating multiple groups and scenes such as international conferences.

● The DJ-RX80 (DJRX80) is a digital guide system receiver manufactured by Alinco. ● Please use it in combination with the transmitter DJ-TX80. ● By adopting the 800MHz band radio microphone type B, it achieves high sound quality. ● It has become easier to operate with multiple groups on 28 channels, achieving more than double the number of channels compared to the 300MHz band type C microphone. The channel matching for numerous subunits can also be easily set using the scan function. ● The rechargeable battery is common with the DJ-TX80, the previous model DJ-TX31, and DJ-RX31. ● It comes with an LCD display, making it easy to check settings. ● It is made of durable polycarbonate. ● You can customize settings such as the type of battery used, operation sounds, and the necessity of display lighting. It automatically searches for the transmitter's signal and stops automatically when found, allowing for channel settings. * It cannot be used in environments with interference. ● The disconnection detection function displays abnormalities in the earphones on the screen. ● It is a model that has obtained technical standard conformity certification in accordance with ARIB RCR STD-15. * For more details, please refer to the PDF document or feel free to contact us.

Company：エクセリ本社
Price：Other

others
Transceiver

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[BbTALKIN] CS2 Rental Set

Rental set of Bluetooth intercom BbTALKIN CS2 that allows hands-free simultaneous calls for up to 6 people.

The "BbTALKIN CS2" is a Bluetooth intercom manufactured by ON'S COMPANY. ● It is a Bluetooth intercom that can be easily attached and detached from a helmet with one touch, allowing hands-free simultaneous communication for up to 6 people. ● The communication range varies depending on the location, but it can reach up to 1.6 km (when used with 2 units in an open field). ● It is particularly recommended for situations that require timing coordination and rapid communication, such as heavy machinery, bridge construction, civil engineering, surveying work, demolition work, construction sites, sewer and plumbing work, electrical and air conditioning work, high-pressure washing, and drones. ● It operates on the 2.4GHz Bluetooth band, so it can be used without affecting medical devices. ● For rentals, we also provide a waterproof headset B199110a, waterproof case B199041, clip mount B199055, USB charging cable, and numbering stickers as basic rental components free of charge. ● When placed in the waterproof case, the speaker, microphone, and main unit are all completely waterproof (IPX8) and have excellent dustproof performance (IP6X) (IP68).

Company：エクセリ本社
Price：Less than 10,000 yen

Unit and other construction
others
Transceiver

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Mobile station vehicle-mounted antenna HMG-260-09EL

A capacity-grounded 3λ/4 whip antenna for use in municipal digital mobile communications and fire emergency digital mobile communications in the 260 MHz band.

The HMG-260-09EL (HMG26009EL) is a high-gain element (MP type) for vehicles manufactured by Nippon Antenna, designed for the 260MHz band. It is an antenna for mobile stations in digital public radio systems, specifically for municipal digital mobile communications and emergency services. This is a capacitive grounded 3λ/4 whip antenna for the 260MHz band. * A whip antenna is defined as an antenna that has no directivity and can receive and transmit signals from any angle. It is used in combination with a separately sold base. - When combined with the base MG-BA3-MJ-2, it becomes the 260MHz band high-gain magnetic mount antenna (5D-2V) HMG-260B-09 F=260-275 (set). - When combined with the base MG-BA5-MJ-2, it also becomes the 260MHz band high-gain magnetic mount antenna (5D-2V) HMG-260B-09 F=260-275 (set). The supported frequency range is 260 to 275MHz. The connector is MP. Included accessories: Instruction manual. * For more details, please feel free to contact us.

Company：エクセリ本社
Price：10,000 yen-100,000 yen

others
Transceiver

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Antenna for 150MHz band radio equipment WH-150-3HA-09

Antenna for a 150MHz band radio device with a hole-mounting installation.

The WH-150-3HA-09 (WH1503HA09) is a rooftop whip antenna (hole mount type) manufactured by Nippon Antenna for the 150MHz band. It is an antenna for radio equipment operating in the 150MHz band. The element is bent, with a 65-degree angle in the middle of the element. It is a whip antenna that is mounted by drilling a hole. The mounting hole diameter is φ23mm, and the mounting plate thickness is 15mm or less. The installation location is on the car's rooftop. * A whip antenna is one that has no directivity and can receive and transmit signals from any angle. It features an NJ connector. It is designed for a specific frequency within the 150MHz range. Please specify the fo (center frequency) in MHz when placing your order. It is a product that complies with safety standards. It is made to order. Please inquire about the delivery time. Included accessories: One instruction manual. There are also models available with a straight NJ connector (WH-150-3H-09) and an L-type NJ connector (WH-150-2H-09) that do not have a bent element. * For more details, please feel free to contact us.

Company：エクセリ本社
Price：10,000 yen-100,000 yen

others
Transceiver

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Antenna for 150MHz band radio equipment WH-150-3H-09

Antenna for a 150MHz band radio device with a hole-mounting installation.

The WH-150-3H-09 (WH1503H09) is a whip antenna (through-hole type) for rooftop use in the 150MHz band, manufactured by Nippon Antenna. It is an antenna for radios operating in the 150MHz band. This is a whip antenna that is mounted by drilling a hole. The mounting hole on the vehicle should be φ23mm, with a mounting plate thickness of 15mm or less. The installation location is on the car's rooftop. * A whip antenna is one that has no directionality and can receive and transmit signals from any angle. It features an NJ connector. It is designed for a specified frequency within the 150MHz band. Please specify the fo (center frequency) in MHz when placing your order. This product complies with safety standards. It is a made-to-order product. Please inquire about the delivery time. Included accessories: 1 instruction manual. There are also models available with a straight NJ connector bent at a 60-degree angle (WH-150-3HA-09) and an L-shaped NJ connector (WH-150-2H-09). * For more details, please feel free to contact us.

Company：エクセリ本社
Price：10,000 yen-100,000 yen

others
Transceiver

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Designated frequency in the 150MHz band] HGW-150-1PN-09

150 MHz band λ/2 non-radial type antenna with N-P type connector specification

● HGW-150-1PN-09 (HGW1501PN09) is a 150MHz 1/2λ element (NP type) manufactured by Nippon Antenna. ● It is a λ/2 non-radial type antenna for radio equipment in the 150MHz band. ● Please use it in combination with the separately sold NJ type base for installation. ● Since it is a specified frequency in the 150MHz band, please specify the fo (center frequency) in MHz when placing an order. ● The model number changes with frequency. - HGW-150-1PN-09 140-143: Frequency 140-143MHz - HGW-150-1PN-09 143-146: Frequency 143-146MHz - HGW-150-1PN-09 146-150: Frequency 146-150MHz - HGW-150-1PN-09 150-155: Frequency 150-155MHz - HGW-150-1PN-09 155-160: Frequency 155-160MHz - HGW-150-1PN-09 160-165: Frequency 160-165MHz - HGW-150-1PN-09 165-170: Frequency 165-170MHz * For more details, please feel free to contact us.

Company：エクセリ本社
Price：10,000 yen-100,000 yen

others
Transceiver

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Designated frequency in the 150 MHz band: HGB-150-2-09EL

Garter-mounted 150MHz band vehicle high-gain element.

● The HGB-150-2-09EL is a 150MHz band vehicle-mounted high-gain element (MP type) manufactured by Japan Antenna. ● It is an antenna for vehicle-mounted radios. ● It is an element of a 150MHz band 5λ/8 whip antenna with a garter mount. ● Since the HGB-150-2-09EL is a specified frequency in the 150MHz band, please specify the fo (center frequency) MHz when placing your order. ● Due to the fixed frequency of the HGB-150-2-09EL, there are also products with the following model numbers. These are not made to order. ・HGB-150-2-09EL 150-153: Frequency 150-153MHz ・HGB-150-2-09EL 153-156: Frequency 153-156MHz ・HGB-150-2-09EL 156-160: Frequency 156-160MHz ● There is also the HGB-150-2A-09, which is a set of the HGB-150-2-09EL and RSB-BA3-MJ, and the HGB-150-2B-09, which is a set of the HGB-150-2-09EL and RSB-BA5-MJ. *For more details, please feel free to contact us.*

Company：エクセリ本社
Price：10,000 yen-100,000 yen

others
Transceiver

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[1.9GHz Band] WX-SR202DAN/WX-SR204DAN

Dante audio network compatible wireless receiver for 1.9GHz band digital wireless microphone system.

● WX-SR202DAN/WX-SR204DAN are wireless receivers manufactured by Panasonic. ● They are wireless receivers compatible with the Dante audio network for a 1.9GHz digital wireless microphone system. In a single system, up to 16 wireless microphones can be used. *Dante refers to the audio network standard developed by Audinate. It allows for the transmission of up to 512 channels of uncompressed audio signals over a gigabit Ethernet network with low latency. ● The difference between WX-SR202DAN and WX-SR204DAN is that the WX-SR202DAN can use 2 wireless microphones, while the WX-SR204DAN can use 4 wireless microphones. ● Up to three additional wireless receivers, WX-SE200DAN, can be added. Each WX-SE200DAN can support up to 14 wireless microphones, and the WX-SR204DAN can support a maximum of 16 wireless microphones. *For more details, please refer to the PDF document or feel free to contact us.

Company：エクセリ本社
Price：Other

others
Transceiver

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[No license or qualifications required] Wideband handheld receiver IC-R15

A wideband handheld receiver that does not require a license or qualifications, has high versatility, and is easy to use even for beginners.

● The IC-R15 is a wideband handheld receiver made by Icom. ● It covers a wide frequency range from 108 to 500 MHz. ● It features an easy mode for beginners, allowing users to simply select registered reception targets categorized in advance to listen. Additionally, it has a favorites function that enables quicker selection of frequently listened memory channels. ● It can receive and record two signals simultaneously, allowing for the collection of more information. ● Recorded audio can be saved as WAV files on a microSD card, enabling data playback at any time without the worry of missing anything. Furthermore, it can record while audio is being played back, and information such as frequency, mode, S-meter, and time (user-set) can also be recorded along with the audio. ● It is equipped with Bluetooth functionality, allowing the use of devices such as VS-3 and S9 IJKP. ● The scan speed is approximately 150 channels per second (in VFO mode). *For more details, please refer to the PDF document or feel free to contact us.*

Company：エクセリ本社
Price：10,000 yen-100,000 yen

others
Transceiver

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[No license or qualifications required] SRFD51 / SRFD51-L

A large access key model of a specific low-power transceiver that can be safely used even in lightweight and interference-prone bustling urban areas.

● The SRFD51 / SRFD51-L is a specific low-power transceiver manufactured by Yaesu Musen. ● Yaesu Musen's STR On-Demand Intercom realizes "Always Connected, Therefore Safe." ● The STR On-Demand series allows for dual-channel reception unique to its design. By utilizing a simultaneous reception method using two channels, a leader can receive communications from different groups at the same time and provide appropriate instructions and communications. ● It features a teleport function that allows the same group currently in use to switch channels with the press of a button during interference. If you are out of the communication range and cannot teleport, a short press of the teleport key will automatically find and switch to the member's communication channel. ● You can select the optimal channel using the area research function, which analyzes the radio wave conditions on-site and finds channels that are less likely to experience interference. ● Once you press the access key to start talking, hands-free communication is possible, and it automatically returns to receiving mode when you stop talking. ● It is equipped with a class-leading 700mW speaker, allowing for clear audio even in noisy construction site environments. * For more details, please refer to the PDF document or feel free to contact us.

Company：エクセリ本社
Price：Other

others
Transceiver

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[New Wave Support] Hybrid IP Transceiver IP700 PLUS

A hybrid IP transceiver that combines an IP transceiver usable nationwide in Japan within mobile phone call areas and a digital simple radio.

● The IP700 PLUS is a hybrid IP transceiver made by Icom. ● The IP700 PLUS is compatible with the new wave. It increases the existing digital simple radio registered station (3R) from 30 channels to 82 channels by adding 52 channels for the new wave. The existing airborne channels increase from 5 channels to 15 channels by adding 10 channels for the new wave. *Note: Airborne channels are receive-only. The existing digital simple radio licensed station (3B) increases from 65 channels to 95 channels by adding 30 channels for the new wave (3C/3D). *Note: Support for relay (3D) 20 channels is planned. ● It has two functions: LTE communication via IP and direct communication via digital simple radio, allowing communication via digital simple radio even when out of mobile phone network coverage or during LTE line troubles. ● Normally, it can be switched between LTE mode for communication with IP radios and DCR mode for communication with digital simple radios. ● In LTE mode, simultaneous calls without a limit on the number of participants are possible. In DUAL mode, only alternating calls are allowed. *For more details, please refer to the PDF document or feel free to contact us.

Company：エクセリ本社
Price：Other

others
Transceiver

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[New Wave Support] Digital Simple Radio License Station IC-DU75 PLUS

Digital simple radio licensed station with GPS location information and Bluetooth communication support, increased to 30 channels for digital simple radio registered stations (3C/3D).

The IC-DU75 PLUS is a new wave-compatible digital simple radio license station manufactured by Icom. The differences from the IC-DU75 are as follows: It increases the existing digital simple radio license station (3B) 65 channels by adding 30 channels for the new wave compatible digital simple radio registered station (3C/3D), resulting in a total of 95 channels. *The relay (3D) 20 channels are planned to be supported. *There are no changes to functions or performance other than for the new wave. It is equipped with a Bluetooth unit. It has GPS functionality that can be transmitted to the other station. It features a sub-channel PTT function that allows transmission and reception between up to 3 channels without the need to switch channels. It has ruggedness that meets the U.S. Department of Defense procurement standards (MIL-STD-810G) tests. With an IP67/66/55/54 dust and water resistance rating, it can be safely used in rain and sandy conditions. It is equipped with a loudspeaker with a volume of 800mW that is easy to hear even in noisy environments. The antenna connector on the radio side is SMA-J. The manufacturer offers a free warranty period of 3 years. *For more details, please refer to the PDF document or feel free to contact us.

Company：エクセリ本社
Price：Other

others
Transceiver

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Repeater Compatible] Specific Low Power Transceiver FC-ZXPRO

A specific low-power transceiver with dustproof and waterproof performance that can be operated even on rainy days or days with high humidity, available as an all-in-one package product that can be used immediately.

● The FC-ZXPRO (FCZXPRO) is a specific low-power transceiver manufactured by F.R.C Co., Ltd. ● It is suitable as a transmitter for the B-EAR sports-specific receiver, the BRIDGECOM R2 Field Receiver, because it does not produce a buzzing sound during transmission. ● It is compatible with the FC-R3 wireless repeater, allowing for an expanded communication area. ● It comes as an all-in-one package with a rechargeable battery and charger, ready for immediate use from the day of purchase. ● It features hands-free VOX functionality. ● It has a second talk function that allows for standby on two channels, main and sub. ● It can be set to 38 different groups. ● It includes a selectable scrambler function with six types of secret codes. ● It has an auto power-off feature that turns off the device after a certain period of inactivity. ● It includes a talk beep function. ● It has a squelch function. ● It features a key lock function. ● It has a key tone ON/OFF feature. ● There is a one-year manufacturer's warranty for natural defects at no charge. ● It is designed to be dustproof and waterproof with an IP65 rating. *For more details, please refer to the PDF document or feel free to contact us.*

Company：エクセリ本社
Price：Other

others
Transceiver

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[No license or qualifications required] Relay device for specific low-power transceivers FC-R3

A relay device for specific low-power transceivers that can be powered ON/OFF and reset with an infrared remote control, and can be installed indoors and outdoors due to its waterproof performance of IPX7.

● The FC-R3 is a relay device for specific low-power transceivers manufactured by FRC Corporation. ● It has a relay function for specific low-power transceivers, theoretically doubling the communication area. ● It is a recommended relay device when using the B-EAR BRIDGECOM R2 Field Receiver with the transmitter set to the specific low-power transceiver FC-ZXPRO. ● It employs a half-duplex method using two frequencies: a receiving frequency of 421 MHz and a transmitting frequency of 440 MHz. ● It supports 18 business channels (1ch to 18ch) and 9 leisure channels (19ch to 27ch), totaling 27 channels. ● It features a 38-group mode. ● SQL (squelch) allows for five levels of sensitivity settings. ● The settings and control of the relay device can be performed using the included infrared remote control. ● It has a strong waterproof rating of IPX7. ● The robust body case is made of aluminum die-cast. ● It operates on household power AC100V using the included AC adapter FC-R3AC. ● It includes an all-reset function that allows all settings to be returned to the initial factory state with simple operation. *For more details, please refer to the PDF document or feel free to contact us.*

Company：エクセリ本社
Price：Other

others
Transceiver

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

IPX4 Splash-proof Ear-hook Type Professional Headset Microphone EME-914MA

IPX4 splash-proof, ear-hook type professional specification earphone microphone compatible with all Alinco transceivers using a 4-pole screw-in plug.

The EME-914MA (EME914MA) is a waterproof, ear-hook type professional earphone microphone manufactured by Alinco (ALINCO) with an IPX4 rating. It can be used with various Alinco 4-pole screw-type plug radios. This is a professional-grade earphone microphone. The microphone part is designed for everyday waterproofing with an IPX4 rating, which helps prevent water ingress from the switch area. The earphone features a large ear cap design that is comfortable for long-term use and less likely to cause ear pain, and the cable is a durable twisted cord. The earphone connection connector is φ2.5mm. The microphone comes with a windscreen to reduce wind noise. There is a rotating clip on the back of the microphone part that allows it to be secured to the chest. The PTT has a locking function. There is no microphone gain switch. Individual parts can also be purchased: - Twisted cable earphone: EZ0041 - Ear pads (black): 5-piece set AD012 / 20-piece set AD013 - Microphone windscreen (includes windscreen and plastic parts for securing): FG0898 *For more details, please feel free to contact us.

Company：エクセリ本社
Price：10,000 yen-100,000 yen

others
Transceiver

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

260MHz Band Wideband 5-Element Yagi Antenna 5BD-2502

The arm, element, and bracket are made of stainless steel, making it a broadband 5-element Yagi antenna for municipal digital mobile communication system fixed stations, which excels in strength.

The 5BD-2502 (5BD2502) is a wideband 5-element Yagi antenna manufactured by Nippon Antenna, designed for the 260 MHz band. * The Yagi antenna consists of three rods of different lengths that form a single antenna, with the shorter rod serving as a director, the middle rod as a driven element, and the longest rod as a reflector, resulting in a highly directional antenna. It was invented in 1926. * This is a wideband 5-element Yagi antenna for fixed stations in municipal digital mobile communication systems. * The operating frequency range is 260 to 275 MHz. * When placing an order, please specify ft (transmission frequency, MHz) and fr (reception frequency, MHz). * The arms, elements, and brackets are made of stainless steel, providing excellent weather resistance and strength. * The feeding part is highly waterproof, ensuring stable performance. * The recommended antenna mounting bracket is C-30. * It comes with an NJ connector, which can be connected if the radio equipment has an NP connector. For extremely low-priced sales of earphone microphones, batteries, and more, please leave it to Excelli. * For more details, please feel free to contact us.

Company：エクセリ本社
Price：100,000 yen-500,000 yen

others
Transceiver

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Cover-type wideband 5-element Yagi antenna 5BD-930A

Cover-type wideband 5-element Yagi antenna compatible with the new frequency band of 850MHz to 940MHz.

The 5BD-930A is a cover-equipped wideband 5-element Yagi antenna manufactured by Japan Antenna. *The Yagi antenna is a type of antenna consisting of three rods of different lengths, functioning as a director, radiator, and reflector, which provides high directivity. It was invented in 1926.* *The supported frequency range is from 850MHz to 940MHz. This antenna is compatible with the new frequency band of MCA after the MCA frequency transition.* *The antenna part is fully covered, making it resistant to rain and wind, and it has excellent weather resistance.* *Since this is a directional antenna that only receives radio waves from a specific direction, please install it according to the direction from which the radio waves are coming.* *It has a high gain of 10.15dBi.* *Please use it in combination with the separately sold MCA Advance connection cable (24m) 5D2V-NP-SMAP-24.* *Note: When using outdoors, please waterproof the connector area with tape or similar methods.* *The terminal shape is N-J type.* *For affordable sales of earphone microphones, batteries, and more, please leave it to Excelli.* *For more details, please feel free to contact us.*

Company：エクセリ本社
Price：100,000 yen-500,000 yen

others
Transceiver

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Bluetooth Headset IJKP BTH-102

Bluetooth headset compatible with Bluetooth 5.0 and can be used with Icom's Bluetooth-enabled transceivers.

●The IJKP BTH-102 (IJKPBTH102) is a Bluetooth PTT headset manufactured by ICOM. ●It is a headset-type earphone microphone that can be used in combination with ICOM's Bluetooth-enabled satellite communication transceiver systems, IP radios, WLAN transceivers, digital simple radios, and specific low-power transceivers. ●Complying with Bluetooth V5.0 standards, it not only increases communication speed but also improves call quality. ●By briefly pressing the PTT button (the upper part) of the Bluetooth PTT Headset IJKP BTH-102, you can switch between transmission and reception. *Please remember to press the PTT button after finishing your conversation. If you forget to press it, you will remain in transmission mode, so please be careful. ●You can make calls wirelessly and hands-free, preventing accidents caused by cable snags or tangles, and allowing you to talk without using your hands. ●It has an IP55 waterproof rating. ●The estimated battery life is about 10 hours with typical use. *For more details, please feel free to contact us.

Company：エクセリ本社
Price：Less than 10,000 yen

others
Transceiver

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

3-element Yagi antenna 3BD-930 (18MSMA-P) set

SMAP-type 3-element for MCA system advance that can be used for transmission and reception corresponding to 850MHz to 945MHz.

● The 3BD-930 (18MSMA-P) set is a 3-element MCA Advance SMAP type antenna manufactured by Nippon Antenna. ● This is a set product that includes the wideband 3-element Yagi antenna (without cover) 3BD-930 and the connection cable for MCA Advance (18m) 5D2V-NP-SMAP-18. * Please be sure to connect the included cable 5D2V-NP-SMAP-18 for use. ● This is a 3-element Yagi antenna mainly used for transmission and reception with MCA Advance. ● It supports frequencies from 850MHz to 945MHz. ● The interior of the feeding part is completely sealed and waterproof. ● This antenna is a single-directional Yagi antenna with wideband radiating elements, reflecting elements, and guiding elements, offering high gain and sharp directivity. ● Accessories: - Feeding cable (30cm) ×1 - Connection cable for MCA Advance (18m) 5D2V-NP-SMAP-18 ×1 For extremely low-priced sales of earphone microphones and batteries, please leave it to Excelli. * For more details, please feel free to contact us.

Company：エクセリ本社
Price：100,000 yen-500,000 yen

others
Transceiver

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Mobile Station Vehicle-Mounted Magnet Type Base] MG-BA5-09(7M)

Mobile station vehicle-mounted magnet type base (5D-2V 7m) made by Nippon Antenna.

●MG-BA5-09(7M) is a magnet-type base station for mobile stations manufactured by Nippon Antenna. (5D-2V 7m) ●It is an antenna base for vehicle-mounted radios. ●It can be used by combining it with separately sold antenna elements and installing the base with the included strong magnet on the vehicle's rooftop or similar locations. ●The antenna part of the base has a screw-type connector. The antenna element can be attached by turning it clockwise. ●Please use it in combination with separately sold capacitive installation type 3/4λ whip antennas HMG-450-1-09EL, HMG-450-3B-09, vehicle-mounted antenna elements EL480 for the 148-157MHz band, and element EL458 for the 150MHz band. ●The radio connection side has an attachment connector, and you can choose from the following connectors according to the radio you are using: - M-P connector M・P-TA2 - N-P connector N・P-TA - BNC-P connector BNC・P-TA - TNC-P connector TNC・P-TA For extremely low-priced sales of earphone microphones and batteries, please leave it to Excelli. *For more details, please feel free to contact us.

Company：エクセリ本社
Price：10,000 yen-100,000 yen

others
Transceiver

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

5-element Yagi antenna 5BD-930 (26MSMA-P) set

SMAP-type 5-element for MCA system advance that can be used for transmission and reception corresponding to 850MHz to 945MHz.

The 5BD-930(26MSMA-P) set is a 5-element MCA Advance SMAP type antenna manufactured by Nippon Antenna. It is a set product that includes the wideband 5-element Yagi antenna (without cover) 5BD-930 and the connection cable for MCA Advance (26m) 5D2V-NP-SMAP-26. Please be sure to connect the included cable 5D2V-NP-SMAP-26 for use. This is a 5-element Yagi antenna mainly used for transmission and reception with MCA Advance. It supports frequencies from 850MHz to 945MHz. The internal feeding part is completely sealed and waterproof. This antenna is a single-directional Yagi antenna with wideband radiating elements, reflecting elements, and guiding elements, offering high gain and sharp directivity. Included accessories: - Feeding cable (30cm) ×1 - Connection cable for MCA Advance (26m) 5D2V-NP-SMAP-26 ×1. For extremely low-priced sales of earphone microphones and batteries, please leave it to Excelli. For more details, please feel free to contact us.

Company：エクセリ本社
Price：100,000 yen-500,000 yen

others
Transceiver

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

60MHz Band 5-Element Yagi Antenna 5DV-0608

60MHz band 5-element Yagi antenna suitable for both transmission and reception for BCP measures.

The 5DV-0608 (5DV0608) is a 60MHz band 5-element Yagi antenna manufactured by Nippon Antenna. * The Yagi antenna is a type of antenna consisting of three rods of different lengths, where the shorter rod serves as a director, the middle rod as a radiator, and the longest rod as a reflector, resulting in a highly directional antenna. It was invented in 1926. * This is a 5-element Yagi antenna suitable for both transmission and reception, designed for municipal disaster prevention administrative radio use. * It is a typical antenna with a single directionality, primarily composed of an antenna, reflector element, and director element. * The appearance is simple, with the supply section and element blanket molded from reinforced resin. * It operates at a specified frequency within the range of 54 to 75MHz. The model number varies depending on the frequency band. - 5DV-0608 68.2-69.8MHz - 5DV-0608 55-66MHz When placing an order, please specify the center frequency (fo) in MHz. * The connector is NJ. * The compatible antenna mounting bracket is F-1 (round)-K2 (D). For low-cost sales of earphone microphones and batteries, please leave it to Excelli. * For more details, please feel free to contact us.

Company：エクセリ本社
Price：100,000 yen-500,000 yen

others
Transceiver

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

400MHz Band 3-Element Yagi Antenna 3SBD-4502

A 3-element Yagi antenna that can share two frequencies with a frequency spacing of 48 MHz or less within the range of 330 to 470 MHz.

The 3SBD-4502 (3SBD4502) is a wideband 3-element Yagi antenna manufactured by Nippon Antenna for the 400 MHz band. *The Yagi antenna is a type of antenna consisting of three rods of different lengths, functioning as a director, driven element, and reflector, which provides high directivity. It was invented in 1926. *This is an antenna for radio equipment. *It is a 3-element Yagi antenna that can share two frequencies within the range of 330 to 470 MHz with a frequency spacing of 48 MHz or less. *When placing an order, please specify ft (transmission frequency, MHz) and fr (reception frequency, MHz). *The connector is NJ. *The compatible mounting brackets for the antenna are C-31(B) and C-19(B). For extremely low-priced sales of earphone microphones and batteries, please leave it to Excelli. *For more details, please feel free to contact us.

Company：エクセリ本社
Price：100,000 yen-500,000 yen

others
Transceiver

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

400MHz Band Directional 6-Element Collinear Antenna 6DA-450

Directional 6-segment collinear antenna with lightning rod at designated frequencies within 330 to 470 MHz.

The 6DA-450 is a directional 6-stage collinear antenna with a lightning rod, manufactured by Nippon Antenna, designed for the 400MHz band. It is an antenna for fixed station radios. The frequency is a specified frequency within the range of 330-470MHz (UHF band). Please specify the center frequency (fo) in MHz when placing your order. It features a stacked dipole antenna on a stainless steel mast, providing high gain and durability. It comes with a lightning rod. This type of antenna has cardioid directivity. *Cardioid directivity refers to a pattern where the shape of the directivity diagram resembles a heart (cardioid), with the strongest signal coming from the front. The gain is 11.15dBi. The antenna length is approximately 5.77m. It weighs 35kg. The antenna side connector is an NJ type. *The antenna side connector is only N-J. It can be converted to other connectors using an extension coaxial cable. There is an 80cm coaxial 8D-2V coming from the antenna. The antenna mounting brackets compatible are B-4-1 and B-8-1(C). *For more details, please feel free to contact us.

Company：エクセリ本社
Price：500,000 yen-1 million yen

others
Transceiver

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

DJ-P422B-T with Air Clone Mode equipped

Equipped with wireless link relay calls and air cloning, this Bluetooth-compatible specific low-power transceiver is ideal for construction sites and work sites.

● The DJ-P422B-T is a Bluetooth-compatible specific low-power transceiver manufactured by Alinco. ● There are two types: the middle antenna DJ-P422B-TM and the long antenna DJ-P422B-TL. ● The DJ-P422B-T has the following features added to the DJ-P421A. Everything else is the same. - Up to four optional wireless relay repeaters, DJ-P113R and DJ-P116R, can be installed to extend the communication range mainly in a straight line, enabling wide-area communication. - It is equipped with an incoming call vibration function that alerts you with vibrations. - It features an air clone mode that allows easy copying of various settings between DJ-P422B-T units. ● It is compatible with optional Alinco Bluetooth accessories such as EME-80BMA, EMS-87B, and EMS-87BNC. ● It supports a total of 47 channels, including relay channels. ● With an IP67 equivalent rating, it has strong dustproof and waterproof specifications, making it safe to use in rain and dusty conditions. ● The estimated charging time is about 6 hours with the nickel-hydride battery EBP-179. ● The manufacturer's warranty period is one year. *For more details, please refer to the PDF document or feel free to contact us.*

Company：エクセリ本社
Price：Other

others
Transceiver

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

F-type antenna mounting bracket F-20W

F-type antenna mounting bracket for attaching an antenna to a pole/mast.

● The F-20W (F20W) is an F-type antenna mounting bracket manufactured by Nippon Antenna. ● It is a bracket for attaching antennas to poles/masts. ● It accommodates mast diameters ranging from φ100 to φ410 and antenna mounting section diameters from φ22 to φ32. ● The model number changes according to the corresponding mast diameter and antenna mounting section diameter. - For mast diameter range φ120 to φ190 and antenna mounting section diameter φ22 to φ32: F-20W(B) - For mast diameter range φ170 to φ260 and antenna mounting section diameter φ22 to φ32: F-20W(C) - For mast diameter range φ230 to φ320 and antenna mounting section diameter φ22 to φ32: F-20W(D) - For mast diameter range φ300 to φ410 and antenna mounting section diameter φ22 to φ32: F-20W(E) *For more details, please feel free to contact us.

Company：エクセリ本社
Price：Other

others
Transceiver

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

F-type antenna mounting bracket F-20

F-type antenna mounting bracket for attaching an antenna to a pole/mast.

The F-20 (F20) is an F-type antenna mounting bracket manufactured by Nippon Antenna. It is a bracket for attaching antennas to poles/masts. It accommodates mast diameters ranging from φ100 to φ410 and antenna mounting section diameters from φ22 to φ32. The model number changes according to the corresponding mast diameter and antenna mounting section diameter. - For mast diameter range φ100 to φ120 and antenna mounting section diameter φ22 to φ32: F-20(A) - For mast diameter range φ120 to φ190 and antenna mounting section diameter φ22 to φ32: F-20(B) - For mast diameter range φ170 to φ260 and antenna mounting section diameter φ22 to φ32: F-20(C) - For mast diameter range φ230 to φ320 and antenna mounting section diameter φ22 to φ32: F-20(D) - For mast diameter range φ300 to φ410 and antenna mounting section diameter φ22 to φ32: F-20(E) *For more details, please feel free to contact us.

Company：エクセリ本社
Price：Other

others
Transceiver

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

F-type antenna mounting bracket F-23

F-type antenna mounting bracket for attaching an antenna to a pole/mast.

The F-23 (F23) is an F-type antenna mounting bracket manufactured by Nippon Antenna. It is a bracket for attaching antennas to poles/masts. It accommodates mast diameters ranging from φ120 to φ400 and antenna mounting section diameters from φ43 to φ65. The model number varies depending on the compatible mast diameter and antenna mounting section diameter. *For more details, please feel free to contact our company.

Company：エクセリ本社
Price：Other

others
Transceiver

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Transceiver Product List and Ranking from 88 Manufacturers, Suppliers and Companies | IPROS

Transceiver Manufacturer, Suppliers and Company Rankings

Transceiver Product ranking