16～30 item / All 73 items
In a testing machine that conducts aging tests of rubber materials in an ozone atmosphere, ultraviolet absorption method is used for concentration control.
-
This is a testing machine for determining the thermal aging characteristics of vulcanized rubber and thermoplastic rubber.
To eliminate the effects of additive migration, aging tests will be conducted by heating within a glass tube.
This is a testing machine for evaluating the air permeability of materials such as fabrics, non-woven fabrics, and filter paper.
The air flow rate is determined when a certain suction pressure (differential pressure) is applied to the test specimen, and the air permeability is calculated per unit time and per unit area to evaluate the air permeability characteristics of the material.
The drying level is evaluated by measuring the time until the surface of the printed ink no longer adheres.
-
It is a batch-type film biaxial stretching device. It can experimentally evaluate and determine the processing suitability conditions and product value of the stretched film.
The demand for high value-added plastic film has been increasing in recent years, leading to a need for further improvements in the accuracy and functionality of testing machines. This biaxial stretching testing device adopts a servo-driven system to enhance stretching speed and diversify stretching modes, allowing tests under various conditions for biaxially stretched films, thus obtaining appropriate processing conditions for samples. - The stretching method employs a center stretch type, and the drive system uses a servo motor, enabling high-precision stretching that results in uniform films. - Various stretching processes can be performed by setting the stretching program according to different conditions. - Sample attachment can be done safely and quickly using a gas pressure grip. - Customization is possible to meet customer needs, including stretching ratio, load detection, secondary heating devices, and data processing. ● Sample testing is available at our factory in Itabashi, Tokyo, so please feel free to contact us.
Compliant with JIS K6255 (2013)! There is a correlation with the Lupke method and the data. Fully automatic measurement of rubber rebound elasticity for up to 20 samples.
Compliant with JIS K6255 (2013)! There is a correlation with the Lyupke method and the data. Fully automatic measurement of the rebound elasticity of rubber for up to 20 samples. ○ Hammer: Diameter Φ12.5±0.05mm ○ Impact speed: 1.88±0.02m/s ○ Release method: Opening by cutting off the current of the electromagnet ○ Supply device: Revolver type with 20 units ○ Test specimen: Φ29.0±0.5mm, thickness 12.5±0.5mm ○ Holding force: 200±20N ○ Air pressure: 0.4MPa or more ○ Operating environment: 5~35℃, 35~85% RH, no condensation ○ Body dimensions: Approximately W550×D700×H880mm ○ Weight: Approximately 100kg ○ Power supply: AC100V, single-phase, 50/60Hz, 2A *Optional Origin block, model SBA-GB (used when setting the origin of the hammer) ○ Reference standards: JIS K6255 (2013), ISO 4662:2017 *For more details, please contact us or refer to the catalog.
This is a testing machine used to evaluate the color fastness to rubbing of dyed fabrics and similar materials.
We evaluate color transfer caused by friction from dyed fabrics and other materials.
The high-temperature HDT testing device is a load deflection temperature testing machine that supports tests exceeding 300°C.
By controlling the arrangement of the test specimens and the airflow within the chamber, we significantly improve the temperature distribution.
This is an analog type Mullen burst testing machine (Mullen type burst strength testing machine).
The Mullen burst tester, used to evaluate the burst strength of materials such as paper and textiles, comes in low-pressure and high-pressure types. The E type is a conventional analog type. The low-pressure type is used for tests up to 2500 kPa, while the high-pressure type is used for tests exceeding that pressure.
This is a testing machine for measuring the tear strength of a single specimen made of materials with low tear strength, such as film.
● It is suitable for materials with low tear strength that cannot be handled by the Elmendorf tear testing machine. ● The tear strength is displayed in a line graph. ● The average, maximum, minimum, and standard deviation of the measurement data are displayed. ● One calibration weight is included for each measurement range.
This is a low-temperature impact brittleness testing device (brittleness temperature testing device) used for low-temperature characteristic testing of rubber and plastics (cold resistance testing).
Rubber and plastic are immersed in a low-temperature liquid, struck with a hammer at a constant speed, and evaluated based on the occurrence of cracks. You can choose between the dry ice method or the refrigeration method.
The Charpy impact testing machine with a low-temperature chamber has automated specimen transport.
●Temperature setting range: -40℃ to 40℃ ●The main switch of the impact testing machine automatically sets the test specimen on the sample stage and conducts the test. ●Up to 15 test specimens can be stored. ●By automating the test specimen setup, the accuracy of the specimen setup and the setup time (within 5 seconds) are standardized, eliminating human error.
This is a system that attaches a load cell to the hammer impact blade (Charpy impact test) and the specimen support platform (tensile impact test) to measure the shock waveform.
● The impact force applied to the sample can be measured using a load converter. ● Changes in impact force over time can be measured.
It is a batch-type film biaxial stretching device, designed for high temperatures up to 400°C. It is used for evaluating the processing suitability conditions and product value of stretched films.
The demand for high value-added plastic film has been increasing in recent years, leading to a need for further improvements in the accuracy and functionality of testing machines. This biaxial stretching testing device adopts a servo-driven system to enhance stretching speed and diversify stretching modes, allowing tests under various conditions for biaxially stretched films, thus obtaining appropriate processing conditions for samples. - The stretching method employs a center stretch type, and the drive system uses a servo motor, enabling high-precision stretching that results in uniform films. - Various stretching processes can be performed by setting the stretching program to accommodate different conditions. - Sample attachment is safe and quick using a compressed air grip. - Customization is possible to meet customer needs, including stretching ratio, load detection, secondary heating devices, and data processing.
This is a fully automatic tensile testing machine specifically for sealing material test specimens.
■ By adopting a cassette-type specimen storage method, we have achieved a compact design for the main unit. ■ The number of specimens that can be stored is up to 90 for standard JIS specimens. (15 pieces / 1 cassette x 6 cassettes) ■ The supply and discharge of specimens is smooth. ■ Capacity: Maximum 2kN ■ Crosshead speed: Maximum 500mm/min ■ Effective stroke: 500mm ■ Number of specimens stored: Approximately 90 ■ Specimen dimensions: Width 12 x Thickness 12 x Length 50mm (sample part) *For more details, please download the PDF or contact us.
