16～29 件を表示 ／ 全 29 件
![Slump Tester "C-273" [Rental]](https://image.www.ipros.com/public/product/image/965/2000496331/IPROS05467893338046012382.jpeg?w=280&h=280)
This is a testing device that measures consistency (workability) based on the amount of subsidence of the top surface of a standard test specimen (truncated cone) made of freshly mixed concrete.
■Applicable Standard: JISA1101 (Japanese Industrial Standard for the Slump Test Method of Concrete)
![Phase characteristic testing device DGR-5000KD [Rental]](https://image.www.ipros.com/public/product/image/661/2000659675/IPROS04309351321574850008.jpeg?w=280&h=280)
It is a multifunctional digital phase characteristic testing device capable of 5A output.
- Supports various relays - Digital meter adopts precision (0.5%) - Uses terminal type that is easy to use on-site - All-element code standardly included for convenience in PAS and UGS testing - Auxiliary power output is AC100V/DC24・48・110V - Capable of inertia characteristic testing - Power supply synchronization internal oscillation switchable
![Hardness testing machine (hardness tester) "Bambino 2 DL type" [Rental]](https://image.www.ipros.com/public/product/image/72d/2000472679/IPROS07835246832785323860.jpeg?w=280&h=280)
A compact hardness tester with an integrated impact (sensor part) and display section.
A compact hardness tester with an integrated impact sensor and display unit. It excels in portability and can directly display hardness values. Measurement is possible even in narrow spaces by inserting the tip. ■ Principle The impact body with a test chip strikes and rebounds from the surface of the specimen using the force of a spring. A voltage is generated by the interaction of a coil and a magnet built into the impact body. The voltage, which is proportional to the speed, is transmitted to the electronic mechanism and displayed digitally as the hardness value "L". The hardness value "L" is a number obtained by multiplying the quotient of the rebound speed of the impact body divided by the impact speed by 1000.
![Echo Chip Hardness Tester (Durometer) "Echo Chip 2" [Rental]](https://image.www.ipros.com/public/product/image/72e/2000474394/IPROS39645181264927651386.jpeg?w=280&h=280)
You can easily and portably measure the hardness of metal materials, from soft materials to hard materials.
This is a hardness testing machine that applies a principle (EQUO principle) completely different from conventional hardness testers. It has a compact design and is very easy to operate. Even inexperienced users can easily obtain accurate measurements. There is also no individual variation in the measurement values.
![Simple Field Permeability Tester (Hasegawa Type) [Rental]](https://image.www.ipros.com/public/product/image/8e6/2000485935/IPROS49919578518481363343.jpeg?w=280&h=280)
Permeability testing can be conducted on-site! The ideal testing device for checking permeability.
■Ideal for checks during design and just before construction, as the permeability of the planting hole can be measured. ■Test holes are excavated with a backhoe. ■Can be measured with a small amount (approximately 6 holes with 20 liters). ■Simple measurement by reading the water level changes with a float-equipped scale. ■Measurement time is 1 hour and 40 minutes per hole.
It can measure locations that could not be measured with conventional tensile testing machines. This is an ultra-compact tensile testing load verification machine that allows measurements to be taken while the mounted objects and machinery are still in place.
■Easy measurement of ceilings and walls Due to its lightweight design, it can be used for long periods without fatigue, allowing anyone to measure easily on their own. ■Clear display of maximum values during testing The peak hold function retains the maximum displayed value. The lamp at the top right of the button lights up while the peak hold is active. ■Easy to read in dark places or at night The backlight can be turned on and off with the power switch, making it easy to read in dark areas or at night. ■Print measurement data on the spot Pressing the print button will print the date, time, set value (SET), measured value (MAX), and unit (kN). *Recording paper will be available for purchase starting from the first roll. ■No power cord required It operates on batteries, eliminating the need for a power source, so it can be used anywhere (uses four AA batteries).
![Mortar Flow Tester 'C-206' [Rental]](https://image.www.ipros.com/public/product/image/828/2000486162/IPROS95552506139181918550.jpeg?w=280&h=280)
The flow value of the mortar is measured by the up and down movement of the disc caused by the rotation of the camshaft.
The flow value of the mortar is measured by the up and down movement of the disc due to the rotation of the camshaft. It complies with the physical testing method for cement JIS R 55201.
![Simple Dynamic Cone Penetrometer 'S-214' [Rental]](https://image.www.ipros.com/public/product/image/01d/2000486239/IPROS47460055989695576644.jpeg?w=280&h=280)
It is widely used for investigations of the ground surface layer and for determining the bearing capacity of small structures.
The simple dynamic cone penetration test aims to easily determine the dynamic cone penetration resistance of the ground by freely dropping a hammer with a mass of 5±0.05 kg from a height of 500±10 mm. It is widely used for investigating the surface layer of the ground and for assessing the bearing capacity of small structures. Applicable standard: JGS 1433 (Guidelines of the Japanese Geotechnical Society for the Simple Dynamic Cone Penetration Test Method)
![SH Concrete Compression Testing Machine 'SH-30' [Rental]](https://image.www.ipros.com/public/product/image/81d/2000486249/IPROS00273221941910554388.jpeg?w=280&h=280)
It can be used for compression tests of lightweight concrete and other materials.
■Specimen size: φ50×100mm ■Maximum compressive load: 30kN
![Soil Research Type Penetration Test Machine 'S-213' [Rental]](https://image.www.ipros.com/public/product/image/396/2000486260/IPROS49665582916761142455.jpeg?w=280&h=280)
This is a soil penetration testing device that measures the dynamic penetration resistance of the soil at the current location to determine the hardness or softness of the ground and the degree of compaction.
This is a test devised by the Public Works Research Institute of the Ministry of Construction, where a hammer with a mass of 5±0.05 kg is freely dropped from a height of 500±10 mm to achieve a penetration of 100 mm, allowing for a simple determination of the dynamic cone penetration resistance of the ground based on the number of impacts required.
![OJ-style on-site CBR testing device 'S-180' [Rental]](https://image.www.ipros.com/public/product/image/0c1/2000486269/IPROS70654347272286971345.jpeg?w=280&h=280)
It is used for a test that directly measures the load required to penetrate the soil to determine the magnitude of bearing capacity and evaluates the bearing capacity characteristics relatively based on the ratio to a standard load.
This test is used to directly measure the load required to penetrate the soil at the site to determine the magnitude of the bearing capacity, and to relatively evaluate the bearing capacity characteristics based on the ratio to a standard load. The field CBR test directly measures the load necessary to penetrate a standard-sized loading piston into the soil, reflecting the current magnitude of the bearing capacity of the subgrade or base course at the site, and evaluates the bearing capacity characteristics relatively based on the ratio to a standard load.
![Automatic Pull-Off Adhesion Testing Machine 'F510-20T' [Rental]](https://image.www.ipros.com/public/product/image/9e9/2000486323/IPROS87217590023669343313.jpeg?w=280&h=280)
It is a device that can accurately measure the adhesion strength to the paint substrate.
The automatic hydraulic pump gradually increases the pressure, allowing for highly reproducible and stable measurement results. 【Features】 ■ User-friendly menu structure that supports multiple languages ■ Compatible with dollies of diameters 10, 14.2, 20, and 50 mm ■ Allows setting the pull-off pressure and maintaining it for a specified duration ■ Pull-off speed can be adjusted in the range of 0.1 to 1.4 MPa/second (15 to 203 psi/second) to meet domestic and international standards ■ Capable of saving up to 60,000 reading values, pressure rise graphs, and destruction characteristic information in 2,500 batches (with alphanumeric names)
![JIS Type Compaction Test Device 'S-171' [Rental]](https://image.www.ipros.com/public/product/image/2db/2000486489/IPROS23660685798182710850.jpeg?w=280&h=280)
This is to determine the relationship between the dry density and moisture content when the soil is compacted.
When constructing embankments and subgrades for roads, optimal moisture content and compaction degree are used in the design and management of compaction. They are also utilized as a means to produce soil specimens for CBR tests, unconfined compressive tests, and others.
![Simple Field Permeability Tester (Hasegawa Type) Improved Version [Rental]](https://image.www.ipros.com/public/product/image/0fb/2000654535/IPROS64842779023899068139.jpeg?w=280&h=280)
Permeability testing can be done on-site!
- The permeability of the planting holes can be measured on-site, making it ideal for checks during the design phase or just before construction. - The test holes are excavated with a backhoe. - Measurement can be done with a small amount of water (approximately 6 holes with 20 liters). - The measurement is simple; just read the change in water level using a float-equipped scale.
