16～30 item / All 35 items
![Techno Tester "RT-1000LD" [Rental]](https://image.www.ipros.com/public/product/image/cd5/2000486208/IPROS25625823204418514907.jpeg?w=280&h=280)
It will be a simple tensile testing device for adhesion and bonding strength.
Load and displacement can be measured simultaneously. By inputting the area of the attachment used, the load value per unit area can be displayed. 【Features】 ■ Simultaneous measurement of load and displacement with digital display ■ Compact and lightweight design allows for easy testing in narrow spaces and difficult conditions.
![Tech Tester "AT-30" [Rental]](https://image.www.ipros.com/public/product/image/431/2000486209/IPROS24326490215576717585.jpeg?w=280&h=280)
This is a testing machine that applies tensile loads to verify whether the installed anchor bolts meet the required performance standards.
It can simultaneously measure load and displacement, with a maximum load of "300kN." 【Features】 ■ Easy-to-read digital display on a large LCD screen ■ Unit switching possible with one touch (kN ⇔ tf switching available) ■ Can simultaneously view the tensile load and displacement of anchor bolts
![Techno Tester "RT-2000LD" [Rental]](https://image.www.ipros.com/public/product/image/5d8/2000486212/IPROS28822718366943195450.jpeg?w=280&h=280)
You can check the tensile load of exterior tiles and other materials using the filler attachment.
The load unit can be easily switched between "kgt" and "kN" with a single button, and it can measure up to a maximum load of "20.00kN (2040kgf)." 【Features】 ■ Safe and Convenient Its compact and lightweight design allows for reliable measurements in narrow spaces or difficult locations by a single person. ■ Unit switching can be done with one button. ■ Auto Power Off Function This function automatically turns off the display approximately 20 minutes after button operation to prevent battery drain. If the display turns off due to auto power off, you can restore it by turning the power switch to "off" and then back to "on." (When recovering from auto power off, the maximum value will be cleared.)
![Point Load Testing Machine [Rental]](https://image.www.ipros.com/public/product/image/97d/2000486307/IPROS58160142705404533890.jpeg?w=280&h=280)
The uniaxial compressive strength of the collected rock can be easily estimated.
The uniaxial compressive strength of the collected rock can be estimated on-site. The Bourdon tube manometer is equipped with two gauges, one for 5 MPa and another for 70 MPa, allowing for high-resolution readings at both low and high loads.
![Battery Tester "BT3554" [Rental]](https://image.www.ipros.com/public/product/image/e1e/2000450946/IPROS51260020308152776864.png?w=280&h=280)
Speeding up the deterioration diagnosis of lead-acid batteries. Reliable measurement even under UPS operating conditions.
The BT3554 is a battery tester that measures and saves data in approximately 2 seconds. With the addition of a protector, it enhances ease of handling and durability for on-site use. Equipped with noise reduction technology, it ensures accurate measurements even during UPS operation. Additionally, it can automatically save measurements once they stabilize, without the need for switch operation. 【Features】 - Improved noise resistance - Fast data saving - On-site report creation and reporting - Fastest approximately 2 seconds from lead contact to auto memory saving (60% shorter compared to conventional models) *For more details, please refer to the PDF document or feel free to contact us.
![Radiation Temperature High Tester '3443' [Rental]](https://image.www.ipros.com/public/product/image/9bb/2000453952/IPROS06098083907551046190.jpeg?w=280&h=280)
All objects emit infrared radiation corresponding to their temperature, and a radiation thermometer captures this infrared radiation, converts it to temperature, and displays the surface temperature.
■ Structure of the Radiation Thermometer Infrared radiation emitted from an object is focused onto an infrared sensor through an optical system such as an infrared-transmitting lens or an 8 µm cut-on filter. The output signal from the infrared sensor is input into an electrical circuit along with the output signal from a reference temperature sensor. The electrical circuit performs corrections for the reference temperature and reflectivity, converting the signals into temperature readings for display.
![Clamp Tester "CL250" [Rental]](https://image.www.ipros.com/public/product/image/e01/2000462921/IPROS07419146206822926915.jpeg?w=280&h=280)
You can measure simply by clamping the wiring while it is powered on, without turning off the power or disconnecting the wiring.
【Features】 ■ Large diameter type (φ55mm) based on AC and DC current measurement ■ AC/DC voltage measurement function, resistance measurement (continuity check) function ■ Equipped with output function
![Leak Clamp Tester "CL360" [Rental]](https://image.www.ipros.com/public/product/image/8f1/2000463430/IPROS46573919643874693794.jpeg?w=280&h=280)
Clamp tester for measuring leakage current.
【Features】 ■ Peak hold function Response time can be switched between approximately 10ms and 100ms. Hold characteristics = Change in indicated value over time is within approximately ±1% F.S after 1 minute of holding (at 23℃±10℃/75% RH or lower, provided there is no condensation). ■ Average value detection method ■ Data hold function with output capability
![Clamp-On Power HiTester '3169' [Rental]](https://image.www.ipros.com/public/product/image/622/2000463655/IPROS12488552383981822476.jpeg?w=280&h=280)
It is a clamp-type power meter that can handle single-phase lines to three-phase four-wire lines with a single unit.
**Features** - Supports up to 4 power lines (common voltage) Can accommodate various measurement lines with 4 circuits (single-phase 2-wire), 2 circuits (three-phase 3-wire), and 1 circuit (three-phase 4-wire) with a single unit. - Abundant measurement functions Simultaneous measurement of voltage, current, power (active/reactive/apparent), cumulative power, power factor, frequency, etc. Additionally, in three-phase 3-wire (3P3W2M) mode, it can display 3 powers/3 currents with 2 voltage/2 current measurements. In three-phase 4-wire mode, it can display neutral line current with 4 current measurements. - 0.5A to 5000A range Can handle large current and large diameter wire measurements with 7 types of clamp current sensors from the CT terminal. - High-speed data storage from 1 cycle (1 waveform) In standard mode cumulative measurement, data can be saved from an interval time of 1 second, and in cumulative and harmonic simultaneous measurement, data can be saved from 1 minute. Furthermore, in short-time mode, data can be saved from the effective value of 1 cycle. - Error connection detection function using vector diagrams The connection confirmation screen with vector display allows for checking disconnections, phase detection, and reverse connection of clamp sensors, ensuring reliable connections even during VT and CT terminal measurements.
![Earth High Tester "3151" [Rental]](https://image.www.ipros.com/public/product/image/446/2000463663/IPROS23079875846155322510.jpeg?w=280&h=280)
A grounding resistance meter that can measure grounding resistance from Type A to Type D.
**Features** - Ground resistance meter compliant with JIS standards - Wide measurement range Accurately measures ground resistance from Type A to Type D grounding work. Additionally, measurements can be taken up to 115% of the measurement range. - More stable measurements Easily check the grounding condition of auxiliary grounding rods for greater accuracy. Furthermore, the measurement frequency can be switched to prevent the effects of harmonic ground currents. - Simple measurement function Switching between normal and simple measurement modes can be done with a single touch of a switch. - Overvoltage protection and warning function During simple measurements with commercial power sources, common miswiring is safely warned by an alarm buzzer and overvoltage protection (AC 250V/1 minute). - Resistant to mud and dirt Enhanced dust resistance for measurement switches and dials, improving durability. - More convenient accessories Tangles of measurement cables can be easily organized with a cable winder.
![Multi Relay Tester "IP-R1500" [Rental]](https://image.www.ipros.com/public/product/image/f93/2000463668/IPROS18874602825927949540.jpeg?w=280&h=280)
A multi-relay tester that achieves multifunctionality and operability while significantly reducing size and weight compared to the IP-R2000.
**Features** - Maximum output current of 50A: Capable of conducting a 1000% test against a 5A tap of the overcurrent relay. - Maximum output voltage of 750V: Compatible with overvoltage relays in the 200V range and ground direction relays. - Automatic determination of relay operation: The built-in microcomputer automatically determines the contacts. - Phase inversion switch: Easily invert the phase during testing of ground direction relays. - Current setting function: Allows setting of test current without directly flowing current through the relay. - Compatible with 10 types of relays: Improved efficiency in testing operations due to compatibility with various relays. - Lightweight: Reduced weight by 25% compared to conventional devices, enhancing portability. - Standard features include convenient output current setting and phase inversion function for DGR (ground direction relay testing). - Can be connected to a high-voltage withstand transformer (R-1115H) for dielectric strength testing of high-voltage equipment and cables. - Completely prevents incorrect wiring with color-coded connector connection method, and ensures safe connections with the use of insulation clips.
![Battery Tester "BT3554-11" [Rental]](https://image.www.ipros.com/public/product/image/22d/2000463674/IPROS03406336031673730984.jpeg?w=280&h=280)
This is a tester for diagnosing the degradation of secondary batteries primarily based on lead-acid batteries.
**Features** - High noise resistance performance: By adopting noise reduction technology, it significantly reduces fluctuations in measurement values. - Fastest measurement to storage in about 2 seconds. - Equipped with a function that automatically holds and stores measurement data when it determines that the measurement lead is connected to the target and that the measurement values are stable. - Display backlight: Considering visibility in dark places, it features a backlight on the LCD, with a light guide plate at the bottom, allowing LEDs to illuminate from the sides to achieve the backlight function.
![Tech Tester 'R-10000ND' [Rental]](https://image.www.ipros.com/public/product/image/d51/2000479025/IPROS52002744197234246165.jpeg?w=280&h=280)
Using a filler attachment, it is possible to check the tensile load of exterior tiles and other materials.
■ Easy to conduct tests in narrow spaces or difficult environments due to its compact and lightweight design. ■ Equipped with convenient features such as auto power off and maximum value hold.
![Tech Tester "KT-20" [Rental]](https://image.www.ipros.com/public/product/image/d50/2000479164/IPROS02993524382131474897.jpeg?w=280&h=280)
A testing device for managing construction equipment sites that eliminates difficult operations and pursues ease of use and simple functionality.
■ By making the display section analog, the weight of the main unit is reduced. ■ Due to its lightweight design, testing on ceilings and other structures is possible.
外壁の劣化調査・施工品質の確認に、接着力・付着力の簡易型引張試験機。
■視認性の良いLED表示、暗い場所でも安心のバックライト付 ■落下事故防止に役立つU字しゃっくるフック付 ■ピークホールド機能により最大荷重値が表示されます。 ■ワンタッチで単位面積当たりの荷重値が表示されます。（N／mm2） ■電池交換のタイミングを逃さない7段階のバッテリー残量表示付き
