Tablets Product List and Ranking from 137 Manufacturers, Suppliers and Companies

Wandering Notification Waiting-kun Portable Receiver Set HW-M48(KE)

It is a wireless wandering notification set that uses a mat sensor placed in a wandering area to alert when the mat sensor is stepped on.

■Features ● This is a combination product of the mat sensor transmitter and the tabletop receiver "HC-350" / portable receiver "RXF-60K". ● It is pre-registered for radio transmission settings so that you can use it immediately. ● When the mat sensor is stepped on, it transmits a signal, and the receiver installed within 100 meters will notify you. (However, the distance may be shorter depending on surrounding conditions, such as inside reinforced concrete buildings.) ■Mat Sensor Transmitter ● It has a user-friendly size of 400mm x 800mm. ● It has a pause timer that temporarily halts operation (for about 5 minutes). ● When the battery level is low, both the transmitter and receiver will notify you. ● It is a high-sensitivity, thin type with a thickness of 6mm, and the backside is treated with a non-slip finish to prevent slipping on the floor. ● The battery life is approximately 2 years with 10 transmissions per day (using 2 AA alkaline batteries). ● It has a simple waterproof structure. ■Selectable "Receiver" <Tabletop Receiver> ● When it receives a signal from the transmitter, it notifies you with a gentle melody (chime sound) and a flashlight. ● You can choose from 8 different melodies (chime sounds). ● The notification time can be selected from 3 seconds to 120 seconds in 7 variations, as well as continuous notification.

Company：セキュリティハウス
Price：Other

Security Sensor Systems
Security devices
Tablets

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Bed Sensor Transmitter TX-BS3

A bed sensor with an integrated transmission unit! It is easy to operate and handle because there are no wires.

■Usage and Operation ●It is used by placing it under the sheets or under the futon. ●Please use it for those who have difficulty getting up from or leaving the bed. ●It wirelessly notifies a receiver 100 meters away when getting up from the bed. ■Bed Sensor Transmitter ●The time to determine getting up can be set in 8 different ways (1 to 8 seconds). ●The pause timer temporarily halts operation (for about 5 minutes). ●The sensor part is a high-sensitivity, thin type with a thickness of 5mm (size: 250mm x 800mm). ●It comes with "non-slip backing" and "string threading holes" to prevent slipping. ●The battery life is about 2 years with 10 transmissions per day (using 2 AA alkaline batteries). ●It has a simple waterproof structure. ●Non-slip bed sensor ●The transmitter and detection parts are integrated, allowing for easy transport without tangled cords. ■Radio Wave Characteristics ●The transmission range of the transmitter is approximately 100 meters in line of sight. It can be easily installed in homes or places without existing nurse call systems. ●The radio waves are pre-registered, so it can be used immediately.

Company：セキュリティハウス
Price：Other

Security Sensor Systems
Security devices
Tablets

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Wandering Notification Rise-Up-kun HW-BS3(KE)

This is a wireless wandering notification set that alerts you when you get out of bed.

■Features ● This is a combination product of the bed sensor transmitter "TX-BS3" and the tabletop receiver "HC-350"/portable receiver "RXF-60K." It is pre-registered for radio frequency settings so that it can be used immediately. ● The bed sensor is placed under the sheets or futon. ● When the user gets up from the bed, it transmits a signal, which is received by the receiver installed within 100 meters. (However, the distance may be shorter depending on surrounding conditions, such as in reinforced concrete buildings.) ● The bed sensor is an integrated unit with a detection part and a transmission part, making it easy to install and carry. ● It has a wake-up time setting function, allowing for operation tailored to the user. ■Bed Sensor Transmitter ● The wake-up judgment time can be set to one of eight options (1 to 8 seconds). ● The pause timer temporarily halts operation (for about 5 minutes). ● The sensor part is a high-sensitivity, thin type with a thickness of 4mm (size: 250mm x 800mm). ● It features a "non-slip back" and "string threading hole" to prevent slipping. ● The battery life is approximately 2 years with 10 transmissions per day (using 2 AA alkaline batteries). ● It has a simple waterproof structure.

Company：セキュリティハウス
Price：Other

Security Sensor Systems
Security devices
Tablets

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Wandering Notification Tatsu-kun (Desktop Receiver) HS-WK(T)

A wheelchair is used with a seat sensor placed on the chair. When you get off (or fall from) the wheelchair, it will notify you with a flash and melody.

Features ● This is a combination product of the seat sensor "BSP-33," the jack-equipped transmitter "HC-116(B)," and the tabletop receiver "HC-350"/portable receiver "RXF-60K." ● It is pre-registered for radio frequency settings so that it can be used immediately. ● If the user gets off (or falls from) the wheelchair, it will notify you with a receiver installed within 100 meters. (However, the distance may be shorter depending on surrounding conditions, such as inside reinforced concrete buildings.) Seat Sensor - Daily life waterproof specification ● Detection output: No-voltage a contact (when pressed) ● Pressure sensitivity: 1.6–1.8 kg/10 cm² ● Material: Surface - PVC (cream), Back - soft PVC (gray) ● External dimensions: 330 × 330 × 6 mm ● Lead wire: 1m cable with Kevlar wire (cream color/RCA plug included) Dedicated Jack-equipped Transmitter HC-116(B) (with on/off switch): Includes two AA alkaline batteries and a strap with a clip.

Company：セキュリティハウス
Price：Other

Security Sensor Systems
Security devices
Tablets

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Wandering Notification Tatsu-kun (Portable Receiver) HS-WK(KE)

It is used by placing a seat sensor on a wheelchair or chair.

■Features ● This is a combination product of the seating sensor "BSP-33," the transmitter with jack "HC-116(B)," the tabletop receiver "HC-350," and the portable receiver "RXF-60K." ● It is pre-registered for radio frequency settings so that it can be used immediately. ● If the user gets off (or falls from) the wheelchair, it will notify you with a receiver installed within 100 meters. (However, the distance may be shorter depending on surrounding conditions, such as inside reinforced concrete buildings.) ■Seating Sensor - Daily life waterproof specification ● Detection output: No-voltage a contact (when pressure is applied) ● Pressure sensitivity: 1.6–1.8 kg/10 cm² ● Material: Surface - PVC (cream), Back - soft PVC (gray) ● External dimensions: 330 × 330 × 6 mm ● Lead wire: 1m cable with Kevlar wire (cream color/RCA plug included) ■Dedicated Transmitter with Jack ■HC-116(B) (with on/off switch): Includes two AA alkaline batteries and a strap with a clip.

Company：セキュリティハウス
Price：Other

Security Sensor Systems
Security devices
Tablets

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Wandering Notification Sensor - Desktop Receiver Set HS-103(T)

We will notify your family 100 meters away. The tabletop receiver will alert you with a flash and melody.

■Quickly detect wandering elderly individuals ■Sensors installed near exits quickly capture the movements of wandering elderly individuals and notify you through receivers set up within 100 meters. ■This helps protect the safety of the elderly and reduces the burden on their caregiving families. ■Notification through sound and light ■When wandering is detected, the receiver installed within 100 meters alerts you with melodies and flashes. ■Installable anywhere without location restrictions ■The sensors are battery-operated, allowing installation in places without power. ■Additionally, they are wireless, eliminating the need for wiring work, and they are compact and unobtrusive. ■Wandering Notification Detection Set ■We offer a lineup of combinations with two types of transmitters and three types of receivers, totaling six variations.

Company：セキュリティハウス
Price：Other

Security Sensor Systems
Security devices
Tablets

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Wandering Notification Haruo-kun HCS-CS30(T)

It is a sensor with two functions: "Wandering Notification" and "Emergency Call." It is easy to use; just clip it to something you want to be notified about when it is moved away.

■Operation ■The clip emergency sensor transmitter can be attached to items you want to be notified about when they are moved or separated. When the string is pulled, it sends a low-power radio signal to a receiver within 100 meters to alert you. ■Clip Emergency Sensor Transmitter 《Two Convenient Functions》 ●The call button on the main unit can be used for emergency contact or calling. ●It can be used by clipping it onto items you want to be notified about when they are moved away. 《Easy Installation and Operation with Abundant Accessories》 ●You can use the included long and short clips and carabiners for various purposes. ●The transmitter can be easily mounted using the included double-sided tape or Velcro tape. 《With On/Off Switch》 ●It comes with an on/off switch for staff or family members. (The main unit's "call" button operates continuously regardless of ON/OFF.) ●The transmitter uses two AA alkaline batteries, which can last for about 5 years (if transmitting 10 times a day). It also has a low battery alert function. 《No Wiring Required》 ●The radio signal reach from the transmitter to the receiver is approximately 100 meters in line of sight. It can be easily installed in homes or facilities. ●The clip-on string has a safety feature that detaches when a certain amount of force is applied.

Company：セキュリティハウス
Price：Other

Security Sensor Systems
Security devices
Tablets

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Emergency Call Set Portable Receiver Set ECS-1P(KE)

In case of emergency, simply press the transmitter to call for staff. The tabletop receiver will notify you with a flash and melody.

■Emergency Call Set ■The Emergency Call Set features two types of transmitters and three types of receivers, offering six combinations. - ECS-1P(T): TXF-110, HC-350 set - ECS-1P(KE): TXF-110, RXF-60K set - ECS-1P: TXF-110, HC-300 set ■Selectable Transmitters for Various Uses ● TXF-110 A pendant-type transmitter that is easy for the elderly to press even in emergencies. It has a waterproof structure suitable for daily life. ● TX-122 A pendant-type transmitter (not waterproof) that sends a signal by pressing both buttons on either side simultaneously. ■Selectable Receivers for Various Uses ● HC-350 (Desktop Receiver) This desktop model can be used immediately by simply plugging the included AC adapter into an outlet. You can choose from eight melodies or chimes, and it visually alerts you with a built-in flashlight. The alert duration can be selected from seven options ranging from 3 seconds to 120 seconds, as well as a "continuous" option. The transmission range of the transmitter is approximately 100 meters in line of sight. ● RXF-60K (Portable Receiver) Compact and lightweight, rechargeable with a dedicated charger included. The radio frequency is already registered.

Company：セキュリティハウス
Price：Other

Security Sensor Systems
Security devices
Tablets

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Emergency Call Set Installation Type Receiver Set ECS-1P

In case of emergency, simply press the transmitter to call the staff. The tabletop receiver will notify you with a flash and melody.

■Emergency Call Set The emergency call set features two types of transmitters and three types of receivers, offering six combinations. - ECS-1P(T): TXF-110, HC-350 set - ECS-1P(KE): TXF-110, RXF-60K set - ECS-1P: TXF-110, HC-300 set ■Selectable Transmitters for Various Uses ● TXF-110 A pendant-type transmitter that is easy for the elderly to press even in emergencies. It has a waterproof structure suitable for daily life. ● TX-122 A pendant-type transmitter (not waterproof) that sends a signal by pressing both buttons on either side simultaneously. ■Selectable Receivers for Various Uses ● HC-350 (Desktop Receiver) This desktop model can be used immediately by simply plugging the included AC adapter into an outlet. You can choose from eight melodies or chimes, and it visually alerts you with a built-in flashlight. The notification time can be selected from seven options ranging from 3 seconds to 120 seconds, as well as a "continuous" option. The transmission range of the transmitter is approximately 100 meters in an unobstructed view.

Company：セキュリティハウス
Price：Other

Security Sensor Systems
Security devices
Tablets

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Emergency Call Set Receiver Portable Set EC-B(KE)

In case of an emergency in the bathroom, it can be called wirelessly. It comes with a cord of approximately 1.7m, allowing for installation at high locations.

■For emergency calls in the bathroom or toilet ■Pull the transmitter's cord or press the transmitter's call button to alert the receiver, which will sound an alarm. ■Features ● The main unit, pull cord, and grip rubber are antibacterial. The pull cord is approximately 1.7m long, adjustable for length, and equipped with a safety feature (the joint will detach when a certain force is applied). ● Designed for use in bathrooms, toilets, and outdoors, it has a waterproof structure suitable for daily life. ● The power source uses two AA alkaline batteries, with a battery life of about 5 years when transmitting 10 times a day. ■Wireless, no wiring required ■Uses low-power radio waves, eliminating the need for wiring, allowing for easy installation in various locations within the home, not just the bathroom. ■Operation ● When the pull cord is pulled or the call button is pressed, a red light flashes to notify receivers within 100m. ■Radio wave reach distance is approximately 100m in line of sight (between transmitter and receiver) ■The transmitter's radio wave reach distance is approximately 100m in line of sight. ■Extension of radio wave reach distance ■By installing a relay unit (RTX-100), the radio waves can be relayed up to 2 times (for 2 units), extending the radio wave reach distance.

Company：セキュリティハウス
Price：Other

Security Sensor Systems
Security devices
Tablets

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Wireless Foot Call HCS-FC1(T)

This is a set product consisting of the foot call transmitter "HCT-FC1" and the tabletop receiver "HC-350."

■Features ● Instead of the switches that have been casually pressed by hand, this device can be used in medical and caregiving settings to protect against infections such as the coronavirus, as well as for staff calls, automatic door unlocking, and emergency button purposes. ● The switch section employs a seesaw-style pedal that detects pressure from either side. ● It comes with a "protective cover" to prevent accidental activation due to falling objects.

Company：セキュリティハウス
Price：Other

Security Sensor Systems
Security devices
Tablets

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Human Motion Sensor (Exposure Type) HM-1B

Direct reflection method using near-infrared beams. It is a sensor that is not affected by temperature changes. It is suitable for installation in hallways and similar areas.

■Features ● Ideal for detecting movement for life safety alert systems. ● Designed for wall mounting. ● The area beam can be adjusted up to 1 meter with a single unit. ● Can be installed to avoid detecting pets like dogs and cats, making it suitable for pet-friendly products. ● A type that does not make mechanical noise, suitable for installation in hallways. * Always connect the motion sensor to the receiver using an AND connection.

Company：セキュリティハウス
Price：Other

Security Sensor Systems
Security devices
Tablets

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Toilet Sensor (Exposed Type) TS-7

In case of emergency! We will notify you if the usage time is long. A sensor that measures distance reduces malfunctions caused by changes in the floor surface.

■Overview ■When used, the toilet sensor detects and outputs signals. ■It detects whether someone is moving or stationary. ■If used for a preset time (e.g., 10 minutes) set in the toilet life safety notification device "SAH-2(T)", it will notify with a lamp or buzzer for 5 minutes in advance. If you do not exit the toilet or press the reset switch during this time, it will notify family members or the management office. ■Distance Measurement ■Seven beams independently measure the distance to the floor and automatically set the detection output height for each. ■It detects the height from the floor. ■Area Setting Changes for the Head ■The sensor head can be adjusted in four stages from 0° to 9°, and the area settings can be selected from a total of nine patterns, including basic settings, through deletion and height changes, allowing installation in the toilet. Three Types to Choose From There are two exposed types and one embedded type available, allowing you to select a sensor that fits the installation location. ●TS-7 (Exposed Round Type) Main installation locations: Low ceiling areas, facilities for specific users (private rooms) Features: Exposed type with a small volume and surface area, dome-shaped. However, it has a black color and many window surfaces. ●TS-7U (Embedded Type) Main installation locations: New construction facilities.

Company：セキュリティハウス
Price：Other

Security Sensor Systems
Security devices
Tablets

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Toilet Sensor (Exposed Square Type) TS-7R

If there are remaining individuals in the restroom of public or commercial facilities, it will be detected. It will notify of prolonged usage to prevent accidents or troubles in advance.

■ When the toilet is used, the toilet sensor detects it and outputs a signal. It detects whether the user is moving or stationary. If the toilet is used for a pre-set time (e.g., 10 minutes) set in the toilet life safety notification device "SAH-2(T)", it will notify with a lamp or buzzer 5 minutes in advance. If the user does not exit the toilet or press the reset switch, it will notify family members or the management office. ■ Toilet-specific sensor Thanks to unique technology, seven light axes independently recognize the distance from the floor to the toilet seat and automatically set the initial configuration. Among the seven, the central one and one behind it adjust the height of the area for the toilet seat and lid. ■ Notification of prolonged use When connected to the toilet life safety notification device SAH-2(T), it will output a signal if used for longer than the set time (usage detection: OFF, 5 seconds, 2, 3, 5, 7, 10, 12, 15, 20, 25, 30, 40, 50, 60, 90 minutes). Additionally, it has a system UP function that notifies in advance about reporting via lamp or buzzer. ■ Installation locations It can be installed in public facilities such as department stores, supermarkets, train stations, libraries, art museums, museums, and schools.

Company：セキュリティハウス
Price：Other

Security Sensor Systems
Security devices
Tablets

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Area Setting Remote Control TS-A

■Main Features ●The area setting remote control is specifically designed for the toilet sensor "TS-7 series." ●It can be used universally with all toilet sensors in the "TS-7 series." ●By pressing the buttons on the remote control, you can reset the area of the toilet sensor.

Company：セキュリティハウス
Price：Other

Security Sensor Systems
Security devices
Tablets

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Life Safety Sensor Exposure Type SA-750

This is a sensor dedicated to the Living Safety Notification System, which adds a time function to the human movement sensor for enhanced living safety notifications!

■Living Safety Sensor This is a dedicated sensor for the 'Living Safety Notification System,' which integrates a "human movement sensor" with the time function of a "living safety notifier." It detects human movement using a passive sensor, and if no movement is detected within a pre-set timer duration, it alerts to a change in living rhythm. The timer can be set to 15 different durations (20 seconds, 5 minutes, 1, 6, 8, 9, 10, 11, 12, 13, 15, 16, 18, 22, and 24 hours). ■Two Types: Surface-Mounted and Recessed It is installed on the ceiling surface of corridors and living spaces used in daily life. With a sophisticated design reminiscent of downlights, both the surface-mounted and recessed types do not compromise architectural beauty. ■User-Friendly Design To eliminate the relay operation sound during detection, a photoMOS relay has been adopted. This allows for a quiet living environment without worrying about the sensor's operational noise. The detection indicator light also uses a gentle green color that is easy on the eyes. ■Pre-Notification Function If no human movement is detected within the set time, a pre-notification output occurs 5 minutes in advance. By connecting a buzzer or light, the system can be effectively utilized.

Company：セキュリティハウス
Price：Other

Security Sensor Systems
Security devices
Tablets

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Life Safety Sensor Embedded Type SA-750U

This is a sensor dedicated to the Living Safety Notification System, which adds a time function to the human movement sensor for enhanced living safety notifications!

■Living Safety Sensor This is a dedicated sensor for the 'Living Safety Notification System,' which integrates a "human movement sensor" with the time function of a "living safety notifier." It detects human movement using a passive sensor, and if no movement is detected within the pre-set timer duration, it alerts to a change in living rhythm. The timer can be set to 15 different durations (20 seconds, 5 minutes, 1, 6, 8, 9, 10, 11, 12, 13, 15, 16, 18, 22, and 24 hours). ■Two Types: Surface-Mounted and Recessed It is installed on the ceiling surfaces of hallways and living rooms used in daily life. With an elegant design reminiscent of downlights, both the surface-mounted and recessed types do not compromise architectural beauty. ■User-Friendly Design To eliminate the relay operation sound during detection, a photoMOS relay has been adopted. This allows for a quiet living environment without worrying about the sensor's operational noise. The detection indicator light also uses a gentle green color for the eyes. ■Pre-Notification Function If no human movement is detected within the set time, a pre-notification output will occur 5 minutes in advance. By connecting a buzzer or light, the system can be effectively utilized.

Company：セキュリティハウス
Price：Other

Security Sensor Systems
Security devices
Tablets

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Life Sensor Display Panel SSH-5

This is a multifunction display panel for the life safety notification system.

■Features 1. Channel display panel function (immediately notifies and outputs when there is a contact input) 2. Life safety notification function (notifies and outputs when the set time exceeds) 3. Life sensor display panel function (connects to sensors with remote input function, and ON/OFF for each channel is linked to remote output. There is no individual output) Three functions are provided. ■Control each room with the main unit No need for an occupancy confirmation switch or card holder switch; control can be done with the main unit. ■Individual channel input Each channel can be operated with an ON/OFF switch, allowing operation only in the necessary rooms when needed. ■Signal input displayed with chime and LED When a signal is input from connected devices, a chime sound and LED display will occur, allowing the operational status of the connected devices to be confirmed visually and audibly.

Company：セキュリティハウス
Price：Other

Security Sensor Systems
Security devices
Tablets

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Life Sensor Display Panel SSH-10

This is a multifunctional display panel for the life safety notification system.

■Features 1. Channel display panel function (immediately notifies and outputs when there is a contact input) 2. Life safety notification function (notifies and outputs when the set time exceeds) 3. Life sensor display panel function (connects to sensors with remote input function, and ON/OFF for each channel is linked to remote output. There is no individual output) Three functions are provided. ■Control each room with the main unit No need for an occupancy confirmation switch or card holder switch; control can be done with the main unit. ■Individual channel input Each channel can be operated with an ON/OFF switch, allowing operation only in the necessary rooms when needed. ■Signal input displayed with chime and LED When a signal is input from connected devices, a chime sound and LED display occur, allowing the operational status of connected devices to be confirmed visually and audibly.

Company：セキュリティハウス
Price：Other

Security Sensor Systems
Security devices
Tablets

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Channel Display Panel CHT-4

This is a 4-channel display board that notifies with a flash and melody (chime).

■ Signal input is notified by flashlight and melody (chime) When a signal is input from a connected device, it will notify you with a flashlight and melody (chime). You can register alert sounds and set ON/OFF for each channel. ■ Output and display mode switching function You can switch between 'hold mode', which continuously outputs until the stop button on the main unit is pressed, and modes of 3 seconds, 6 seconds, 15 seconds, or 30 seconds, allowing for settings according to the system. ■ Chime and melody sounds selectable from various options There are 10 types of alert sounds combined with melodies, which can be registered arbitrarily from 1CH to 4CH. The alert (red LED blinking) will sound in conjunction. It will not sound when the volume is set to OFF.

Company：セキュリティハウス
Price：Other

Security Sensor Systems
Security devices
Tablets

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Channel Display Panel CHN-5(F)

A display panel that shows the signal input from 5 systems with melodies (chimes) and flashes, capable of communicating with up to 4 locations.

■ Signal input is indicated by a flashlight and melody (chime). When a signal is input from the connected device, it will be indicated by a chime sound and LED, allowing you to confirm the operational status of the connected device visually and audibly. (a contact and b contact inputs can be selected) - Alert sound: Refer to the alert sound list (can be set for each channel) ■ 5-channel individual input Each channel is equipped with an ON/OFF switch, allowing operation only in necessary locations at necessary times. ■ LED display hold/non-hold The LED can display various indications based on settings. OFF: off / Standby: green light / Input: red blinking In short-time mode, the LED can be set to hold or non-hold. ■ Output/display mode switching function You can switch between 'hold mode', which continuously outputs until the main unit's stop button is pressed, and 'short-time mode', which automatically propagates (3 seconds, 150 seconds, 30 seconds), allowing settings according to the system. ■ Check function When there is an input in the reset state, it will turn red in conjunction, allowing for loop checking. (This is the same in the case of communication connection)

Company：セキュリティハウス
Price：Other

Security Sensor Systems
Security devices
Tablets

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Channel Display Panel CHN-10(F)

Signal input from 10 systems displayed with melody (chime) and flash, with a display panel that can connect up to 4 locations.

■ Signal input is notified by flashlight and melody (chime). The channel display panel shows the input signal from the connected device with chime sounds and LED indicators, allowing for immediate confirmation of the operational status of the connected device. ● Alert sound: Refer to the alert sound list (configurable for each channel) ● LED display: OFF: Off, Standby: Green light, Input: Red blinking ■ In short-time mode, the LED can be set to either hold or non-hold. ■ Output and display mode switching function You can switch between 'hold mode', which continuously outputs until the stop button on the main unit is pressed, and 'short-time mode' (3 seconds, 15 seconds, 30 seconds), allowing for settings tailored to the system. ■ 10-channel individual input Each channel is equipped with an ON/OFF switch, enabling operation of only the necessary channels when needed. ■ Remote input terminal The operation stops with a make input. The display for each channel and set/reset will turn off. ■ External power supply Provides external power of DC 12V, 400mA when supplied with AC 100V.

Company：セキュリティハウス
Price：Other

Security Sensor Systems
Security devices
Tablets

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Housing-type pole cover (1 piece) BP-100KP

Existing pole-mounted sensors can easily be converted to housing type.

■Compact Housing Type This is a compact housing type that is easy to install, allowing for simple attachment and excellent design aesthetics. ■Outstanding Security Due to its structure that conceals the interior, the position of the sensor's warning line and the types of sensors installed cannot be identified, providing superior security. ■Easy Installation Installation is straightforward as it simply involves covering the pole (specific to KP-100/100B), making it easy to set up. ■Retrofit Installation on Existing Poles It is easy to retrofit onto existing pole installations. Additionally, it supports back-to-back installation of sensors. *For new installations, a pole is required. Beam direction: within 140° ■Compatible Models - PXB-HFA series - PXB-F series - PXB-100SW - PXB-TE series - PB-TE series - PB-FZ series - PB-F series - PB-IN-HF series - PB-IN-100AT - BUS-XF series - BUS-XT series *Please attach the included lock spacer to the sensor for use.

Company：セキュリティハウス
Price：Other

Security Sensor Systems
Tablets

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Housing case (1 piece) KH-120VS

An infrared sensor storage case that excels in aesthetics and can be installed anywhere.

■ Discreet vigilance is possible By adopting invisible colored acrylic pipes inside and placing the entire frame on the inside, the installation position and direction of the sensors are not discernible. ■ Strong design with excellent durability It is resistant to impact and has outstanding durability, allowing for long-term use. The material primarily consists of galvanized and painted steel plates, with stainless steel used for bolts. ■ Customizable vigilance network Single beam, double beam, and four-stage beam infrared sensors can be used, allowing for linear and loop vigilance. Additionally, the height at which the sensors are installed can be adjusted, enabling the optimal configuration of the vigilance network according to the installation location. ■ Capable of accommodating specifications beyond standard By modularizing the internal structure of the housing, it is designed to also accommodate microwave sensors, solar cell units, and more. ■ Compatible models - PXB-HF-KH series - PXB-HFA series - PXB-F series - PXB-TE series - PXB-100SW - BUS-XF series - BUS-XT series - PB-IN-HF series - PB-FZ series - PB-IN-100AT

Company：セキュリティハウス
Price：Other

Security Sensor Systems
Tablets

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Housing case (1 piece) KH-160VS

An infrared sensor storage case that excels in aesthetics and can be installed anywhere.

■ Discreet vigilance is possible By adopting invisible colored acrylic pipes inside and placing the entire frame on the inside, the installation position and direction of the sensors are not discernible. ■ Strong design with excellent durability It is resistant to impact and has outstanding durability, allowing for long-term use. The material mainly consists of galvanized and painted steel plates, with stainless steel used for bolts. ■ Customizable vigilance network Single beam, double beam, and four-stage beam infrared sensors can be used, allowing for linear and loop vigilance. Additionally, the height of the sensor installation can be adjusted, enabling the optimal configuration of the vigilance network according to the installation location. ■ Capable of accommodating specifications beyond standard By modularizing the internal structure of the housing, it is designed to also accommodate microwave sensors, solar cell units, and more. ■ Compatible models - PXB-HF-KH series - PXB-HFA series - PXB-F series - PXB-TE series - PXB-100SW - BUS-XF series - BUS-XT series

Company：セキュリティハウス
Price：Other

Security Sensor Systems
Tablets

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Housing Case KH-70ST

For more details, please refer to the basic information.

Company：セキュリティハウス
Price：Other

Security Sensor Systems
Tablets

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Housing Case KH-120ST

For more details, please refer to the basic information.

Company：セキュリティハウス
Price：Other

Security Sensor Systems
Tablets

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Combination Sensor COM-50XTL

A composite sensor that integrates infrared (dual beam opposing type) and microwave (opposing type).

■Strong against harsh environments (Composite sensor) The composite type integrates a dual-beam infrared sensor and a 24GHz microwave sensor, reducing malfunctions during adverse weather conditions such as fog, snow, and heavy rain. *The 24GHz microwave sensor complies with the domestic radio law as a "specific low-power radio station, wireless equipment for mobile detection sensors," so no application for a radio station license or any other procedures are required on the customer's side. ■Strong against lightning (Enhanced lightning protection) Surge resistance has been strengthened to reduce damage caused by induced lightning. *This does not guarantee protection against failures or malfunctions due to lightning strikes. ■Two models: "L" type and "H" type The microwave section has two frequency types: "L" type and "H" type. This prevents mutual interference when multiple units are installed directly on the line. *The infrared section can switch between four modulation frequencies using the function setting switch. ■Strong against stray light (Dual modulation method) By adopting our unique dual modulation method in the infrared sensor, we enhance the ability to distinguish between stray light (such as sunlight and car headlights).

Company：セキュリティハウス
Price：Other

Security Sensor Systems
Tablets

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Glass Break Sensor GS-2000

Sharp detection performance! Slim-shaped ultrasonic glass break sensor.

■Features This is an ultrasonic sensor that detects the unique ultrasonic waves generated when plate glass, such as windows, is broken, and outputs an alarm signal. It is designed specifically for unmanned surveillance. ■Reliable Glass Break Detection It sharply picks up the unique ultrasonic waves generated during glass breakage and accurately processes the signals according to frequency and sound pressure, shutting out external noise. ■Environmental Check Function It is equipped with a mode switch and indicator light that make it easy to check the installation environment and confirm operation. ■Easy Installation and Versatile Placement ● The surveillance area can be adjusted with a maximum vertical range of 8m and a maximum horizontal range of 7m, with a wide variable range of 30°, allowing for easy installation on the ceiling. Additionally, it can monitor multiple pieces of plate glass with a single unit, making installation and maintenance easy without compromising aesthetics. ● Being passive, multiple units can be installed in the same space. ● Its slim design allows it to be installed in narrow spaces between windows and curtains or blinds.

Company：セキュリティハウス
Price：Other

Security Sensor Systems
Tablets

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Glass Breakage Sensor Piezoelectric Type Straight Code GS-02

Touch-type glass break sensor with one-touch "memory reset" function.

■High Reliability Detection Performance It captures only the specific vibration frequency generated when glass is broken, thanks to the piezoelectric element and filter amplifier, and does not respond to vibrations or impacts from wind or vehicles. ■Voltage-Free Relay Contact Output As it features a voltage-free relay contact output, there is no need for cumbersome external controllers or relays. Additionally, it is possible to connect other sensors (b contacts) to the same circuit. (The contact operation is a one-shot lasting approximately 2 seconds.) ■Two Types of Lead Wires Two types are available: a straight cord (GS-02, 50cm lead wire) and a coiled cord (GS-02C, 18.5cm lead wire, fully extended 130cm), allowing for flexible usage as needed. ■Simple Design With a diameter of 37mm and a thickness of 15mm, it has a compact and simple design, adopting a calm gray color that does not create a sense of incongruity regardless of where it is installed. ■One-Touch Memory Reset Function Memory reset is possible simply by short-circuiting the reset terminal on the front of the sensor with a conductive material, without operating the power switch. (Resetting can also be done by operating the power switch.)

Company：セキュリティハウス
Price：Other

Security Sensor Systems
Tablets

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Tablets Product List and Ranking from 137 Manufacturers, Suppliers and Companies | IPROS

Tablets Manufacturer, Suppliers and Company Rankings

Tablets Product ranking