Switch×セキュリティハウス - List of Manufacturers, Suppliers, Companies and Products

Switch Product List

16～30 item / All 54 items

Displayed results
Ultrasonic Switch HZ-1U Embedded Type for Separation

Ultrasonic Switch HZ-1U Embedded Type for Separation

3D area stationary detection type safety switch for automatic doors

■Features ●This safety sensor is ideal for ensuring safety for circular doors, as it has a three-dimensional area. ●With initial settings, the microcontroller automatically assesses the surrounding environment and the sensor installation height to establish a stable area. ●Radio waves, wind, external noise, and temperature changes are all continuously controlled by the microcontroller for optimal operation. *Please note that it cannot be used as a security sensor or an automatic door activation sensor, as monitoring operation starts with an external activation input (voltage-free contact). *If there are uneven walls in the surrounding installation environment, reflections from the walls may occur, potentially reducing sensitivity.

  • Security Sensor Systems
  • Security devices

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Pull switch PS-100

Pull switch PS-100

The automatic door sheet shutter is opened and closed with a rope switch. (Ideal for factory gates, etc.)

■Features ●Water-resistant type ●Cord length: 3m ●No-voltage relay contact (a contact) AC/DC 30V, 0.5A or less ●Installation location: Indoor / Semi-outdoor

  • Security Sensor Systems
  • Security devices

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Wireless Remote Control Switch [2CH x 3 Point Type] DR-243R

Wireless Remote Control Switch [2CH x 3 Point Type] DR-243R

Wireless Remote Control Switch [2CH x 3 Point Type] DR-243R

■2CH3 Point System The transmitter is a 2CH 3-point system. The transmitter allows you to select the display of "Open, Stop, Close" and "1, 2, 3" using the included sheet. By using them individually, control of up to 6 locations is possible. ■Reliable Reach Distance Maximum reach distance of approximately 40m with specific low power. ■Output Switching Function By changing the settings of the receiver, it can be switched between one-shot output and latch output. ■Number of Registrable Units The receiver can register up to 100 IDs. ■Easy Installation The receiver has a compact design and comes with an antenna with a 4m cable, allowing for flexible installation locations.

  • Security Sensor Systems
  • Security devices

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Key switch 3-way KE-502R

Key switch 3-way KE-502R

Adoption of a key cylinder that is difficult to pick and a special key that is hard to duplicate.

■ Key switch with a special key cylinder It features a key cylinder that is difficult to pick and a special key that is hard to duplicate. Included keys: 3 keys in 1 set ■ Key switch adopting a 3-way method convenient for remote operation It adopts a 3-way method that is convenient for remote operation, allowing both the key switch side and the controller side to set/reset the alarm. ■ Loop indicator light and buzzer for confirming the presence of abnormalities Equipped with a loop indicator light and buzzer that can confirm whether there are any abnormalities through loop input. Additionally, it has a spare light input, allowing for use according to the system.

  • Security Sensor Systems
  • Security devices

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Motion Sensor Switch MS-12FA-N

Motion Sensor Switch MS-12FA-N

Reduced false alarms through AND detection in two directions: horizontal area and downward area! This enables more stable security outdoors.

■ Adoption of 2-direction AND detection for horizontal and downward areas The detection method outputs a detection signal only when both the horizontal area and downward area detect something, reducing false alarms caused by small animals like dogs and cats, as well as false alarms due to excessive extension of the detection area, enabling more stable security outdoors. ■ Two sensors in upper and lower sections for a 180° horizontal surveillance area: MS-12FA only With two sensors positioned in the upper and lower sections, a 180° horizontal surveillance is possible. Additionally, the detection method allows for the selection of AND detection or OR detection between the upper and lower sections. ■ Window surveillance possible through area adjustment By adjusting the area with the included area mask sheet, window surveillance is possible. The MS-12FA can monitor windows on both sides by installing one unit at the center, utilizing the two sensors in the upper and lower sections. ■ Outdoor installation possible Due to its rainproof structure, it can be installed outdoors. It can be mounted on walls and poles, allowing for flexible installation locations. (Additional mounting brackets are required for pole installation.) ■ Day and night discrimination function Equipped with a day and night discrimination function that controls output based on surrounding brightness. It can operate only at night. (Variable from approximately 10lx to infinity)

  • Security Sensor Systems

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Motion Sensor Switch MS-12TA-N

Motion Sensor Switch MS-12TA-N

Reduce false alarms with dual-direction AND detection in horizontal and downward areas! Enables more stable security outdoors.

■Detection possible only at close range Detection range has been made possible only at close distances of 2m to 12m [10 levels]. ■Adoption of AND detection in two directions: horizontal area and downward area The detection method outputs a detection signal only when both the horizontal area and downward area detect, reducing false triggers caused by small animals like dogs and cats, as well as false triggers from excessive detection area extension, allowing for more stable security outdoors. ■Window surveillance possible through area adjustment By adjusting the area with the included area mask sheet, window surveillance is possible. The MS-12FA can monitor windows on both sides by installing one unit centrally with its two sensors in the upper and lower sections. ■Outdoor installation possible Due to its rainproof structure, it can be installed outdoors. It can be mounted on walls and poles, allowing for flexible installation locations. (Additional mounting brackets are required for pole installation.) ■Day and night discrimination function Equipped with a day and night discrimination function that controls output based on surrounding brightness. It can operate only at night. (Variable from approximately 10lx to infinity)

  • Security Sensor Systems

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Magnet switch (Brown) MG-103(B)

Magnet switch (Brown) MG-103(B)

Magnet switch equipped with a loop check tester hole.

■Features ● Easy loop checking with the tester hole on the switch cover. ● Available in gray and white, allowing color selection based on installation location. ● Spacer and stopper sold separately. *When installed on magnetic materials such as iron doors, the set distance will be shorter due to the product's characteristics. In that case, please use a spacer or similar to install it away from the magnetic material to ensure the set distance.

  • Security Sensor Systems

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Magnet switch (gray) MG-103(G)

Magnet switch (gray) MG-103(G)

Magnet switch equipped with a loop check tester hole.

■Features ● Easy loop checking with the tester hole on the switch cover. ● Available in other colors such as brown and white, allowing you to choose based on the installation location. ● Spacers and stoppers are sold separately. *When installed on magnetic materials such as iron doors, the set distance will be shorter due to the product's characteristics. In that case, please use spacers or similar items to install it away from the magnetic material to ensure the set distance.

  • Security Sensor Systems

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Magnet Switch (White) MG-103(W)

Magnet Switch (White) MG-103(W)

Magnet switch equipped with a loop check tester hole.

■Features ● Loop checks can be easily performed using the tester hole on the switch cover. ● Available in gray and brown, allowing color selection based on the installation location. ● Spacers and stoppers are sold separately. *When installed on magnetic materials such as iron doors, the set distance will be shorter due to the product's characteristics. In such cases, please use spacers or similar to install it away from the magnetic material to ensure the set distance.

  • Security Sensor Systems

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Waterproof Magnetic Switch MG-103WSb

Waterproof Magnetic Switch MG-103WSb

Waterproof magnetic switch that can be used in outdoor and high humidity environments.

■ Waterproof magnetic switch suitable for outdoor and high humidity environments ● It has a b contact output. ● It is waterproof (equivalent to JIS waterproof grade 7) and can be used in outdoor and high humidity adverse environments, such as bathrooms and gates, in addition to conventional doors and aluminum sliding doors. ● The magnetic part is thin (2mm), allowing it to be used on cross doors. ● Available in three colors: White (W), Brown (B), and Gray (G), which can be chosen according to the installation location. *When installed on magnetic materials such as iron doors, the set distance will be shorter due to the product's characteristics. In that case, please use spacers or similar to install it away from the magnetic material to ensure the set distance.

  • Security Sensor Systems

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Embedded Magnet Switch MG-103TU

Embedded Magnet Switch MG-103TU

It is a built-in magnetic switch that can detect the opening and closing of doors while maintaining aesthetics.

■Features ● It is embedded in the door and frame that you want to monitor, with only the surface of the plate exposed, so it does not draw attention to the door. ● The aluminum plate has an anodized finish, providing excellent corrosion resistance and a beautiful appearance. ● The switch section is terminal-type, making wiring connections easy. *Note: The door and frame to be installed require processing for embedding.*

  • Security Sensor Systems

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Ultra-compact magnet switch AMS-9

Ultra-compact magnet switch AMS-9

Series smallest! Ultra-compact magnetic switch that can be installed in a small space.

■Features ● Achieves ultra-compact size with a volume ratio of 1/8 (compared to MG-103), allowing for inconspicuous installation in various locations. ● Can be fixed with double-sided tape on flat surfaces, and with thin nails on uneven surfaces or easily peeling painted surfaces. *When installed on magnetic materials like iron doors, the set distance will be shorter due to the product's characteristics. In such cases, please use spacers or similar items to install it away from the magnetic material to ensure the set distance is maintained.

  • Security Sensor Systems

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Tenki Switch SAT-20

Tenki Switch SAT-20

A control unit integrated numeric keypad switch with 2 outputs that supports a PIN code and can be set to 4 different operating modes.

■Dual System Output It has a built-in dual system output and operates by verifying individual PIN codes, allowing this single unit to perform two types of control: setting/resetting mechanical security and opening/closing electric locks. ● Output 1: Output mode can be set ● Output 2: One-shot output ■ Four Output Modes Depending on the connected devices, four types of output modes can be set. ○ Latch Mode A mode where the contacts reverse with each PIN code verification. ○ One-shot Mode A mode that outputs contacts for approximately one second during PIN code verification. ○ Key Switch Mode A mode for remotely operating our controller. ○ Simultaneous Dual Output Mode A mode where two outputs are activated simultaneously during PIN code verification. In cases where unlocking is requested due to threats, it will output an alarm to the security panel while the unlocking output operates. *When using in Key Switch Mode, please set the remote switch LED setting on the controller side to "light up when unlocked." ■ Alarm Buzzer If an incorrect PIN code is entered four times in a row, the built-in buzzer will sound, deterring pranks and intruders.

  • Entrance/exit management and personal identification system

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Rainproof Tenkey Switch PIN500

Rainproof Tenkey Switch PIN500

Can be installed as is outdoors! (No rainproof box is needed.)

■Features ● It is IP65 (splash-proof), so it can be installed without a rainproof box. ● The characters on the metal keypad are backlit and visible at night, and they will not wear off. ● It has two output systems, allowing for use in controlling electric locks and security (dual channel). ● Up to 500 different PIN codes can be set. (Initial value: 4 digits / Maximum: 8 digits) ● It has a built-in heater, making it suitable for installation in cold regions.

  • Entrance/exit management and personal identification system

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Non-contact switch DHS-1

Non-contact switch DHS-1

Operate without touching the switch! Avoid the risk of infection from viruses and bacteria! Ideal for facilities that prioritize hygiene!!

■Main Features ● It can open and close automatic doors without touching the main unit, making it ideal for environments that require hygiene considerations, such as food factories and hospitals. ● The adoption of microwave technology significantly reduces malfunctions caused by condensation in environments with temperature differences, such as cold storage. ● The detection status can be easily confirmed at a glance through LED displays and response sounds. ● Output can be set in two patterns: one-shot and latch output. ● Compatible with a single switch box (JIS standard) for installation. ● Designed to be washable with an IP55 equivalent rating. (The wall and back are not applicable.) ● With a thickness of 22mm, it does not create a sense of incongruity when placed alongside other devices. * Continuous detection of stationary objects is not possible. * Do not place moving objects within the detection area, as this may cause malfunctions. * If the unit is installed on a metal wall, the detection distance may be reduced.

  • Security Sensor Systems
  • Security devices

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Search Keywords Related to Switch

COPYRIGHT © 2001-2025 IPROS CORPORATION ALL RIGHTS RESERVED.