Stripping Agent Product List and Ranking from 69 Manufacturers, Suppliers and Companies

Construction water-based coating peeling agent "Bio Hakuri AQ"

Introducing a water-based coating remover for construction that penetrates to the substrate without dissolving the coating film and softens the entire coating!

"Bio-Hakuri AQ" is an environmentally friendly water-based paint film stripping agent that does not use chlorine-based organic solvents. After application, the active ingredients penetrate deep into the existing paint film, softening it and creating a moist state. Therefore, it is possible to remove and recover the film in a moist sheet state using hand tools. This improves the reduction of harmful substances (such as asbestos) from dispersing and enhances recovery efficiency. [Features] - Does not use chlorine-based organic solvents (dichloromethane) - Softens and swells the paint film - Excellent in preserving the working environment *For more details, please refer to the PDF document or feel free to contact us.

Company：山一化学工業
Price：Other

Safety and consumables
Building Cleaning Equipment
Stripping Agent

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Powerful Coating Stripping Agent "Neoliver S-911"

Powerful immersion-type release agent effective for urethane, epoxy, and cationic electrodeposition coatings!

"Neo River S-911" is a powerful immersion-type stripping agent that does not contain dichloromethane and is environmentally friendly. It can be used at room temperature. It is effective not only on general coatings but also on difficult-to-strip coatings such as urethane and epoxy resins. 【Properties】 ■ Appearance: Brown transparent liquid ■ Odor: Acidic smell ■ pH: 2.4 (1% aqueous solution at 20°C) ■ Specific gravity: 1.10±0.02 (at 20°C) ■ Flammability: None, etc. *For more details, please download the PDF or feel free to contact us.

Company：三彩化工大阪営業所
Price：Other

Medicines
paint
Stripping Agent

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Construction Coating and Paint Stripper "Neoliver Mud Pack B"

The removal of coatings can be done using a hand scraper with a scraping rod, suitable for architectural coatings and paint stripping agents!

"Neo River Mud Pack B" is a high-clay type stripping agent for architectural coatings and paints that does not contain dichloromethane, making it environmentally friendly. It does not have quick action, but it allows for thick application due to its high clay content. There is minimal dripping even when applied to vertical surfaces. Additionally, it evaporates slowly, maintaining its stripping power for an extended period and demonstrating high stripping strength. 【Properties】 ■ Appearance: Brown paste ■ Odor: Petroleum solvent smell ■ pH: Neutral ■ Specific gravity: 1.1 (20°C, typical value) ■ Flammability: Flammable, etc. *For more details, please download the PDF or feel free to contact us.

Company：三彩化工大阪営業所
Price：Other

Medicines
paint
Stripping Agent

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Water-wash-free immersion-type paint stripping agent Torqueno for coating jigs.

This is a stripping agent of the non-applicable water seal type under the Poisonous and Deleterious Substances Control Act. It easily removes paint films just by immersing the coated object!

- Cost reduction: Usable with room temperature immersion, eliminating the need for heating work and reducing costs. - Fast: No need for rinsing as it does not use wax or surfactants. Usable immediately after peeling. - Safe: Water-based type, eliminating concerns about evaporation. Reduces the hassle of reapplication. - Reliable: Alkaline, so there is no worry about rust. - Convenient: Can be peeled off in about 16 hours with "overnight peeling," significantly improving work efficiency! For more details, please refer to the catalog or feel free to contact us.

Company：中島商会（本社）
Price：Other

Exterior coating materials
paint
Medicines
Stripping Agent

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Defoaming effect type concrete release agent "Koma Coat"

Defoaming agent for concrete that generates defoaming effects and enhances peeling strength.

Currently, the standards for inspection and management of concrete structures and products are increasingly improving, focusing not only on strength issues but also on the quality of the finishing surface (whether it is smooth, the color, the degree of bubbles, and the surface strength), which has become one of the technical evaluations of construction contractors. Komalock has focused on release agents that play a significant role in solving these issues and has developed "Koma Coat," which produces a de-bubbling effect and enhances release. 【Points of Pursuit for Concrete Finishing Surfaces】 ■ Quality of fresh concrete (type of cement, aggregates, slump, mixing condition, admixtures, etc.) ■ Quality of the pouring method of fresh concrete and the compaction method (how the vibrator is applied) ■ Shape of the structure (presence or absence of taper) ■ Quality of the formwork surface ■ Quality of the concrete release agent used (Koma Coat) For more details, please refer to the catalog or feel free to contact us.

Company：コマロック
Price：Other

Concrete admixture
others
Stripping Agent

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Defoaming effect type concrete release agent "Koma Coat"

Release agent for achieving a smooth concrete surface! The anti-foaming effect results in a smooth, beautiful surface without bubbles. *Comparison data of bubbles on the coated surface is available.

Currently, the standards for inspection and management of concrete structures and products are increasingly improving, focusing not only on strength issues but also on the quality of the finish (whether it is smooth, the color, the degree of bubbles, and the surface strength), which has become one of the technical evaluations of contractors. Our company has focused on release agents, which play a significant role in solving these issues, and has developed "Koma Coat," which produces de-bubbling effects and enhances release. 【Points of Pursuit for Concrete Finishing Surfaces】 ■ Quality of fresh concrete (type of cement, aggregates, slump, mixing condition, admixtures, etc.) ■ Quality of the pouring method for fresh concrete ■ Quality of the compaction method (how the vibrator is applied) ■ Shape of the structure (presence or absence of taper) ■ Quality of the formwork surface ■ Quality of the concrete release agent used (Koma Coat) *Please refer to the PDF materials for the application surfaces of our products and those of other companies, and feel free to contact us regarding the products.

Company：コマロック
Price：Other

Concrete admixture
others
Stripping Agent

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Professional-grade stripping agent "Micro Cleaner Coating Remover"

Speedy stripping work is possible! It powerfully decomposes glass coating agents and more.

The "Micro Cleaner Coating Remover" is a powerful stripping agent that effectively breaks down glass coating agents that are considered difficult to remove. It contains special penetrating agents and dispersants, allowing it to quickly penetrate the substrate for speedy stripping work. Depending on the type of coating agent and adhesion strength, it can be diluted with water for use. 【Features】 ■ Effectively breaks down glass coating agents that are considered difficult to remove ■ Enables speedy stripping work ■ Developed by cleaning specialists ■ Strongly decomposes glass coating agents ■ Ultra-strong types are also available in the lineup *For more details, please refer to the PDF document or feel free to contact us.

Company：タックアンドカンパニー
Price：Other

Safety and consumables
Stripping Agent

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[For Contractors] Introduction of Concrete Form Release Agents *Comprehensive Catalog Available

Concrete pump trucks and numerous achievements in tunnel construction! Sanamold is chosen for its reliability and track record in various sites with consideration for the environment.

The Sanamold series is compatible with the latest risk assessments and implements labeling on products, as well as the sending and distribution of SDS (Safety Data Sheets). The SDS and product catalog for each Sanamold are now easily downloadable from our company website. The "Concrete Form Release Agent Sanamold" offers a rich lineup of concrete form release agents tailored for various applications, such as "Sanamold DX," which is used in patcher plants, concrete pump trucks, and tunnel construction. Additionally, our company is committed to environmentally friendly water-based release agents and offers two types of water-based release agents. Please feel free to contact us. The "Concrete Form Release Agent Sanamold" is a product of Sagami Corporation, which primarily manufactures and sells form release agents for the construction industry, as well as petroleum products, grease, lubricants, and materials for civil engineering projects. ◎ Sales of various oil neutralizers, lubricants, separator cutting oils, etc. ◎ Manufacturing and sales of custom-made form release agents.

Company：相模
Price：Other

Formwork material
Tunnel Materials
Various blocks
Stripping Agent

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Concrete form release agent "Sana Mold Super"

No need for finishing work, improving work efficiency! A release agent developed for bridge construction and similar projects.

"Sanamold Super" is a release agent developed for tunnel, shield, caisson, dam, subway, utility duct, and bridge construction. It has a strong adhesion effect to formwork, making it resistant to being washed away by rainwater and aggregates, and the release effect remains unchanged even when dry. Additionally, since there is no sludge adhering to the formwork, finishing work is unnecessary, improving work efficiency. The concrete surface has fewer air bubble marks and is smoother, resulting in a more beautiful finish. 【Features】 ■ Resistant to being washed away by rainwater and aggregates, with unchanged release effect even when dry ■ Eliminates the need for finishing work, improving work efficiency ■ Creates a waterproof and rust-proof film on the surface of the formwork, protecting it from rust ■ The concrete surface has fewer air bubble marks and is smooth *For more details, please refer to the PDF document or feel free to contact us.

Company：相模
Price：Other

Formwork material
Tunnel Materials
Bridge Materials
Stripping Agent

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Chemical reaction type concrete formwork release agent "Sana Mold DX"

Forming a strong membrane for tunnels with leaks and high humidity, suitable for shield construction!

"Sana Mold DX" is a chemical reaction-type concrete formwork release agent and anti-sludge adhesion agent that contains a high concentration of plant oils, mineral oils, special surfactants, and special rust inhibitors. When applied to ready-mixed concrete manufacturing equipment and transportation equipment, it forms a special film that prevents adhesion of ready-mixed concrete, and also creates a strong film in tunnels and shield construction areas where there is leakage and high humidity. It has excellent adhesion to formwork and extensibility, and due to its water-replacement properties, it can be used in areas where some moisture is present. 【Features】 - High concentration of plant oils, mineral oils, special surfactants, and special rust inhibitors - Forms a special film when applied to transportation equipment, preventing adhesion of ready-mixed concrete - Creates a strong film in tunnels and shield construction areas with leakage and high humidity - Excellent adhesion to formwork, extensibility, and water-replacement properties - Usable in areas where some moisture is present *For more details, please refer to the PDF document or feel free to contact us.

Company：相模
Price：Other

Formwork material
Tunnel Materials
others
Stripping Agent

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Chemical reaction type concrete formwork release agent "Sana Mold No-3"

A release agent developed mainly for wave-dissipating blocks, foundation blocks, and other port construction works.

"Sana Mold No-3" is a chemical reaction-type concrete form release agent developed mainly for wave-dissipating blocks, anchoring blocks, and other port construction projects. Based on "Sana Mold No-2," it improves rust prevention and workability. The viscosity has been adjusted to allow for easy application even on complex shapes and fine details, so please use it in its concentrated form. Continued use makes it easier to remove old concrete, reducing cleaning work. 【Features】 ■ Developed mainly for wave-dissipating blocks, anchoring blocks, and other port construction projects ■ Improved rust prevention and workability ■ Viscosity adjusted for easy application on complex shapes and fine details ■ Makes it easier to remove old concrete, reducing cleaning work *For more details, please refer to the PDF document or feel free to contact us.

Company：相模
Price：Other

Formwork material
Various blocks
others
Stripping Agent

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Water-based concrete form release agent "Sana Mold FX-101"

Odorless, no skin irritation, and considerate of the work environment! Composed of materials with a biodegradation rate of over 95%.

"Sanamold FX-101" is an environmentally friendly water-based concrete form release agent composed of over 95% biodegradable materials. Since it does not use mineral oils, it leaves no oil stains, oil burns, or streaks. The surface of the concrete achieves a uniform and beautiful finish with minimal bubble marks. Additionally, it is non-flammable and safe for human health, making it suitable for tunnel construction. 【Features】 ■ Environmentally friendly release agent with excellent biodegradability ■ No mineral oils used, so it leaves no oil stains, oil burns, or streaks ■ The surface of the concrete has a uniform and beautiful finish with minimal bubble marks ■ Also has rust prevention properties and is compatible with various form materials ■ No odor or skin irritation, considerate of the working environment *For more details, please refer to the PDF document or feel free to contact us.

Company：相模
Price：Other

Formwork material
Tunnel Materials
others
Stripping Agent

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Water-soluble concrete form release agent "Sana Mold R-200T"

Forms a semi-dry film that is effective for peeling! An economical peeling agent.

"Sanamold R-200T" is a water-soluble release agent that contains a specially refined surfactant blended in the most effective way, designed for water-soluble concrete formwork release (dilution of 5 to 10 times). When water is added, it quickly disperses and turns milky white, and it does not separate even when left for a long time. Compared to oil-based types, it results in fewer pinholes on the concrete surface, providing a beautiful finish, and it does not interfere at all with the adhesion of finishing agents such as mortar and sprayed tiles. Additionally, the emulsion applied to the formwork relatively quickly evaporates moisture, forming a semi-dry film that is effective for release. [Features] - Contains a specially refined surfactant blended in the most effective way as a water-soluble release agent - Does not separate even when left for a long time - Does not interfere at all with the adhesion of finishing agents such as mortar and sprayed tiles - Forms a semi-dry film that is effective for release - Extremely cost-effective compared to oil-based release agents *For more details, please refer to the PDF document or feel free to contact us.

Company：相模
Price：Other

Formwork material
others
Stripping Agent

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Environmentally friendly coating penetration softener "IS100"

Easier and more efficient coating removal is possible! A coating penetration softener that is gentle on people and the environment.

"IS100" is an environmentally friendly coating penetration softener that uses components that are gentle on both people and the Earth, allowing for the complete recovery of peeled coatings. It is a neutral type that does not contain acids, alkalis, amines, or highly toxic substances, and is non-combustible and non-hazardous, complying with wastewater quality standards. It produces minimal noise and does not generate dust, making it suitable for work in urban areas and at night. Additionally, the peeled coatings can be fully recovered. By removing old, poor coatings and improving the substrate, and then repainting with high-performance paint, it contributes to extending the renovation and repainting cycles of various buildings and structures, leading to cost reduction. 【Features】 ■ Gentle on people and the environment ■ Improved work efficiency ■ Compatible with various old coatings *For more details, please refer to the catalog. Feel free to contact us with any inquiries.

Company：磯部塗装東京本社
Price：Other

Coating film waterproofing material/permeable waterproofing material
paint
Stripping Agent

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Peeling Agent "Samtech Alpha CX" TOA Shiburu Co., Ltd.

Water-based release agent ideal for decorative plywood, stainless steel, and FRP molds.

"Samtech Alpha CX" is an optimal release agent for smooth-faced plywood formwork and stainless steel formwork. 【Features】 - It is an ideal release agent for smooth-faced plywood formwork and stainless steel formwork. - It is a dry-type release agent that is a water-soluble release agent applied to the formwork. - It can be diluted with clean water at a ratio of 5 to 10 times, making it economical. Please stir well before use. - As a water-based release agent, it does not create oil stains. - Even when the surface is dry, additives that react with concrete remain on the surface. It does not slip like oil-based release agents. - It has a strong adsorption effect, making it difficult to flow off the formwork surface. - It has a low mineral oil scent, making it suitable for work in confined spaces. - Additionally, it is non-flammable, allowing it to be used in places with restrictions on the introduction of materials, such as tunnel construction.

Company：TOAシブル
Price：Other

Safety and consumables
Stripping Agent

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Non-chlorine-based paint stripper "Skeleton NC No. 651"

Strong peeling is under your control! It is less likely to droop, and work can be done with fewer peeling instances.

At Natco Co., Ltd., we handle the non-chlorinated paint stripping agent "Skeleton NC No. 651." With a coating amount of 0.7 to 1.0 kg/m², it is easy to work with, minimizing drips and requiring fewer stripping applications. It can be used on existing architectural coatings and various paints for metals, such as general building exteriors and metal products. For more details, please refer to the related catalog. 【Features】 ■ Makes stripping work easier - Minimizes drips and allows for fewer stripping applications ■ Environmentally friendly - Complies with specific regulations and PRTR - Not subject to organic solvent poisoning prevention regulations *For more information, please refer to the PDF materials or feel free to contact us.

Company：ナトコ本社みよし工場
Price：Other

Safety and consumables
others
Stripping Agent

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Easy handling and removal of asbestos 'JP Method' *Illustrated materials are currently being provided!

More than 30% reduction in construction time and cost compared to conventional removal methods! An 'asbestos treatment method' that allows for easy and safe asbestos handling by a small number of people.

The "Asbestos Treatment Method JP Method" is a new asbestos treatment method that requires no scraping work, using the scattering prevention agent "JP-2000" and the scattering suppression agent "JP-3000." When the scattering prevention agent "JP-2000" is sprayed, the asbestos easily falls off, allowing for simple processing by subsequently vacuuming it with equipment. Next, by spraying the scattering suppression agent "JP-3000" on steel frames and other structures, it prevents any remaining asbestos from scattering during demolition, ensuring the safety of employees during the removal process. 【Features】 - Asbestos easily falls off: Reduces the number of workers and significantly shortens the construction period. - Suppresses the scattering of asbestos: Ensures the safety of workers. ⇒ Reduces total costs. *For illustration materials, please refer to the PDF available for download.

Company：JPカンファレンス
Price：Other

Renovation and repair methods
Special Construction Method
Stripping Agent

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Presentation of Materials] Conventional Methods of Other Companies vs. New Asbestos Method

Comparing traditional methods and new asbestos methods! There was a reason for such a difference!

Asbestos used in Japan is approximately 90% chrysotile from serpentinite. In addition, there are amphibole minerals (such as amosite and crocidolite) that have about 500 times the heat resistance of chrysotile, which are used in kitchen facilities and boilers. This document includes information on the types and characteristics of asbestos, as well as a comparison of new and traditional methods for asbestos removal. [Contents (excerpt)] ■ What are the cutting-edge technologies for asbestos treatment? ■ About asbestos ore ■ Overview of asbestos and the characteristics of this agent ■ Inhalation pathways of dust and asbestos-related diseases ■ Conceptual diagram of the removal of asbestos-containing spray materials *For more details, please refer to the PDF document or feel free to contact us.

Company：JPカンファレンス
Price：Other

Special Construction Method
Dismantling and moving
Consulting companies
Stripping Agent

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Exterior wall asbestos-containing paint remover "Sky Protector PE Plus"

A paint stripper for exterior walls containing asbestos that does not contain any methylene chloride.

"Sky Protector PE Plus" is a wall asbestos-containing paint remover that solidifies needle-like fibers in glass, eliminating their floatability for treatment. Instead of dissolving the old paint film, it softens and peels it off, making recovery easy. Additionally, even if high-pressure washing is performed during the removal process, the paint after peeling does not dissolve in water, allowing for the separation of wash water and waste, enabling safe disposal. [Features] - Completely free of highly toxic methylene chloride - Easy recovery - Bacteria decompose and neutralize the material - Does not damage the surface of the structure - Safe disposal possible *For more details, please download the PDF or feel free to contact us.

Company：ハイドロ・スカイ
Price：Other

Interior coating materials
paint
Plastering and painting work
Stripping Agent

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Exterior wall asbestos-containing paint remover "Sky PE Plus"

Does not contain highly toxic methylene chloride and is easy to recover! Does not damage the surface of the substrate!

"Sky PE Plus" is a wall paint stripping agent that does not contain highly toxic methylene chloride and does not damage the surface of the structure. Even when high-pressure washing is performed during the removal process, the paint after stripping does not dissolve in water, allowing for the separation of wash water and waste, which can be safely disposed of. It has protective functions over the long term and is used in many repair works and pre-demolition treatment sites. 【Features】 - Capable of processing by glassifying needle-like fibers to eliminate floating materials - Completely free of highly toxic methylene chloride - Softens and strips old paint films, making collection easy without scattering - Sufficient fish toxicity safety - Does not damage the surface of the structure *For more details, please refer to the PDF materials or feel free to contact us.

Company：ハイドロ・スカイ
Price：Other

Photocatalysts and various wall materials (exterior and interior walls, etc.)
Stripping Agent

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Release agent

Introduction to the release agents we handle, compatible with oil-based, water-based, synthetic resin, and lacquer types!

We would like to introduce the "removal agents" handled by J.C. Supply. "Remover Z" is suitable for stripping paint films (oil-based, water-based, synthetic resin, lacquer). "Hakuri Power" is a medium viscosity, low odor type that can handle thick films and various types of coatings. (Inorganic coatings cannot be stripped.) 【Product Lineup】 ■ Remover Z Powerful Stripping Agent Spray: 420ML ■ Hakuri Power SD300: 4KG ■ Hakuri Power SD300: 20KG *For more details, please refer to the PDF document or feel free to contact us.

Company：ジェイ・シー・サプライ
Price：Other

Safety and consumables
Stripping Agent

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Neutral water-based stripping agent ECO "STRIPPER"

"STRIPPER" is an environmentally friendly stripping agent with very little ecological impact, designed for high safety in anticipation of unexpected guerrilla rainstorms and linear precipitation bands.

Labor Standards and Health Regulations, Specific Chemical Substance Hazard Prevention Regulations, Lead Poisoning Prevention Regulations PCB Special Measures Law, Low Concentration PCB Waste Collection There are many laws regarding hazardous substances. We will introduce what kind of "environmental equipment," "safety and health protective gear," and "industrial waste disposal methods" are necessary in construction through a flowchart! ◆ What safety and health protective gear is needed for lead, chromium, and PCB? ◇ Appointment of a supervisor for specific chemical substances based on PCB content? ◆ What is the deadline for disposing of low concentration PCB waste? ◇ Implementation of lead-containing paint films by wet methods according to the Lead Poisoning Prevention Regulations? ◆ When should the hazardous substance content survey (paint film survey) be conducted? ◇ What is by-product PCB? We will clearly introduce the issues you face! *For more details, please refer to the PDF materials or feel free to contact us.

Company：三重塗料営業推進部
Price：Other

Steel structure construction
Rust Inhibitor
Bridge Construction
Stripping Agent

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Release agent "Hyper Remover"

A peeling agent that quickly and thoroughly removes stubborn coatings like those made of urethane.

"Hyper Remover" is a non-rinse, ultra-powerful stripping agent that can remove stubborn coatings in a short time with its dual power of dissolving and penetrating ability. It is very economical as it is used in high dilution. With its stamina design, it maintains the stripping effect for a long time. Additionally, phosphorus compounds are not used as raw materials. 【Features】 ■ Dual power of dissolving and penetrating ability ■ Stamina ■ Excellent economy ■ Outstanding workability ■ Superior wettability ■ Non-rinse, etc. *For more details, please download the PDF or contact us.

Company：スイショウ油化工業本社
Price：Other

Other plastering finishing agents
Stripping Agent

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Dry Release Agent "Dry Wax Off Special"

A dry release agent that allows the wax coating to form a film and can be easily peeled off.

"Dry Wax Off Special" is a dry stripping agent that peels off as a film. It is a neutral type that is also environmentally friendly. It is suitable for stripping flooring where large amounts of water cannot be used, and it does not produce wastewater, so it does not pollute the sewage system. [Features] ■ No wastewater produced ■ Considerate of the environment ■ Even if the application surface dries during work, a small amount of water can be sprayed to restore effectiveness *Please feel free to contact us for more details.

Company：渡辺商店
Price：Other

Subsidiary materials
Stripping Agent

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Environmentally friendly paint stripping agent "Super Periver AFH - Water-based"

Wet peelable exterior coating material! An environmentally friendly paint stripper that considers the working environment.

"Super Periver AFH-Water-Based" is an environmentally friendly paint stripping agent that does not contain chlorine-based agents (such as dichloromethane), which are recognized as carcinogenic, and has a low odor. It can also be used on asbestos-containing paint films. By softening the old paint film for wet stripping, it prevents the dispersion of harmful substances contained in the old paint film. 【Features】 ■ Does not contain chlorine-based agents (such as dichloromethane) recognized as carcinogenic ■ Low odor type ■ Capable of wet stripping exterior paint materials ■ Prevents the dispersion of harmful substances in the old paint film by softening it for wet stripping ■ Contains drying suppressants *For more details, please refer to the PDF document or feel free to contact us.

Company：大伸化学本社
Price：Other

Medicines
Stripping Agent

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Sample Available] Coating Stripper for Structures 'Pelican Remover Series'

A water-based paint stripper that is gentle on both people and the environment.

The "Pelican Remover Series" is a water-based coating remover for steel structures that is non-hazardous and low-odor, yet possesses excellent stripping capabilities. Designed with a focus on practical use, it is easy to apply and resistant to dripping, making it highly regarded for its usability. Thanks to this, we have surpassed 350,000 m² in adoption records! 【Features】 ■ Penetrates deep into old coatings, reducing the burden during stripping work ■ Combines easy application with a smooth texture and low dripping viscosity ■ Capable of removing while suppressing the dust of harmful substances such as lead, chromium, and PCBs ■ Contains a drying suppressor that prolongs the softening state of the coating ■ Low odor and highly biodegradable, designed with consideration for both people and the environment *If you would like a sample, please apply through "Contact Us." For more details about the product, please view the PDF data from "Download."

Company：大伸化学本社
Price：Other

Medicines
Stripping Agent

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

New environmentally friendly stripping agent "Kikusui Aqua Remover Eco"

Achieve high coating with rheology control! Difficult to freeze even at low temperatures, enabling stable work.

"Kikusui Aquarimover Eco" is a new environmentally friendly stripping agent that pursues the wet stripping properties of PCB and lead-containing coatings. The applied area is white, preventing any missed spots. It can be applied thickly, allowing the components to penetrate thoroughly. Since it can be applied thickly and effectively penetrates and swells the old coating, it allows for easy removal of the coating, and the large pieces that peel off make collection and disposal simple. [Features] ■ Safety ■ Environmentally friendly product ■ High adhesion for reduced construction time ■ Low-temperature stability *For more details, please refer to the PDF document or feel free to contact us.

Company：菊水化学工業
Price：Other

paint
Stripping Agent

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Kikusui Coating Removal System

Introducing Kikusu's asbestos removal method that prevents scattering, along with methods for removing PCB, lead, and chromium!

Kikusui is a manufacturer of finishing materials for construction, asbestos dispersion prevention agents, fireproof coatings, and more. In recent years, as measures against asbestos content in construction finishing materials have become an issue, we developed the environmentally friendly stripping agent "Kikusui SP Remover Eco." Utilizing our expertise as a finishing material manufacturer, we have also been working to establish safe environmental measures in asbestos treatment work. Additionally, leveraging our technical capabilities and know-how as a paint manufacturer, we have developed the stripping agent "Kikusui Aqua Remover Eco," which is effective for the removal of organic coatings containing PCB, lead, and chromium. [Kikusui Coating Removal System] ■ KS-NER Method (New Environmentally Friendly Stripping Agent Scraping Method) ■ KS-BWJ Method (Ultra High-Pressure Washing Method with Suction Device) ■ KS-BDG Method (Disc Grinder Method with Suction Device) ■ KS-BSB Method (Shot Blasting Method with Suction Device) ■ KS-WER Method (Water-Based Environmentally Friendly Stripping Agent Scraping Method) *For more details, please refer to the PDF materials or feel free to contact us.

Company：菊水化学工業
Price：Other

Special Construction Method
Stripping Agent

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Floating Asbestos Fluorescent Detection Kit "Asbester(R) AIR Series"

Fluorescent staining reagent kit for on-site detection of airborne asbestos at demolition sites.

"Asbestos(R) AIR" is a reagent kit that rapidly detects airborne asbestos. The detection principle involves fluorescently labeled asbestos-binding proteins aligning on the surface of asbestos fibers, allowing the asbestos to be seen glowing under a fluorescence microscope. It is a highly sensitive and simple asbestos fluorescence detection kit. [Features] ■ Rapid ■ Low cost *For more details, please download the PDF or feel free to contact us.

Company：シリコンバイオ本社
Price：Other

others
Stripping Agent

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Stripping Agent Product List and Ranking from 69 Manufacturers, Suppliers and Companies | IPROS

Stripping Agent Manufacturer, Suppliers and Company Rankings

Stripping Agent Product ranking