Last Updated： Aggregation Period:Sep 09, 2026～Oct 06, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Sep 09, 2026～Oct 06, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Sep 09, 2026～Oct 06, 2026
This ranking is based on the number of page views on our site.
451～480 item / All 555 items
It can measure load and tension with high precision and can be applied to various safety management.
It can be used for safe load management in various tasks such as tension management of wire ropes and power lines, as well as safety checks for cranes and winches. ■It has a tare weight function.
![Portable pH Meter 'HM-40P' [Rental]](https://image.www.ipros.com/public/product/image/e65/2000496325/IPROS77202253812431749515.jpeg?w=280&h=280)
This pH meter is ideal for field measurements with its energy-saving and waterproof design.
■Replaceable with ORP probe ■1-channel specification ■With backlight ■Data memory function
Introducing a digital panel meter that achieves top-class performance and ease of use in the industry!
The "DPPT Series" is a digital panel meter designed to be highly efficient and multifunctional while also being easy to set up and use. It provides flexibility for process measurement. Additionally, the bipolar voltage or current input can be adjusted to almost any engineering unit. The decimal point can also be selected, making it suitable for use with pressure, flow, and other process inputs. 【Features】 ■ High performance, multifunctional ■ Easy to operate ■ Equipped with a bright 3-color (red, green, yellow) 9-segment LED display with a wide viewing angle ■ Fully configurable via firmware ■ No jumpers required *For more details, please refer to the PDF document or feel free to contact us.
Measuring soil moisture in the range of pF 0 to 3.0! This is a replacement (maintenance) part for those who purchased it previously.
The "SLAW-PFPT20" is a tensiometer capable of measuring soil moisture (pF). Please install it by aligning the bottom of the seal with the soil surface height and pouring water into the gap to ensure good contact with the soil. This sensor is included with the "SLAW-WPAD201-PFPT20" and "SLAW-WPAD201-PFPT20X2" AD subunits, so if you are placing a new order, please choose the set with the subunit. 【Measurement Specifications】 ■ Soil Moisture (pF) ・ Measurement Range: pF 0 to 3.0 *For more details, please refer to the external link or feel free to contact us.
Low conductivity water, alcohol mixed aqueous solutions, environmental water, etc., can now be measured in about 5 seconds for samples that previously required stable measurement for a long time! pH meter with AI functionality *Test results available.
The "pHAI" is a wireless pH meter that is set to feature an "AI mode" capable of automatically performing smoothing, power saving, and temperature prediction in addition to its standard mode. It allows for easy pH measurement inside desiccators or incubators without worrying about cable wiring. The main unit and device can be separated, providing a spacious work area on the lab bench, and operations such as electrode cleaning are also made easy. This is a completely new product that merges general sensor development technology, data analysis techniques (such as AI), and advanced electronics, thoroughly pursuing user-friendliness. *In August, we plan to announce a low-cost entry model. 【Innovative AI Features】 ■ Automatically switches the processing of sensor responses and selects the appropriate smoothing process. ■ Determines the sensor's response status and automatically adjusts the measurement interval, extending battery life. ■ Even if the temperature of the measuring liquid changes, it can predict the final temperature in about 60 seconds and quickly display the pH value. *Currently, we are offering free measurement results for tap water. *For more details, please refer to the PDF document. If you would like to be contacted by our sales representative, please reach out via the inquiry button.
Do not miss the peak of instantaneous load fluctuations.
The MM-014L is a compact and lightweight handheld measuring device that can be easily carried around, allowing for direct reading of physical quantities simply by setting the capacity and rated output in combination with strain gauge-type converters such as load cells and displacement sensors. The peak hold function enables the display and recording of measurement values and peak values. The measured data can be stored in the built-in data memory and on an SD card, facilitating easy and smooth data collection. The display screen features a reflective color LCD that provides excellent visibility even outdoors. Operation is intuitive, using function switches linked to icon displays on the screen.
Ideal for wavelength measurement of 100GBASE-LR4/ER4! It allows for simultaneous measurement and display of total values.
The "EPSA-QL-0040" is a 100G LR4/ER4 power meter from East Photonics in South Korea. It measures the optical power of 100G LR4/ER4 at each wavelength with a single touch. Additionally, it can measure and display the total value simultaneously with the measurements at each wavelength. 【Features】 ■ Target: In-house ■ Measures and displays the wavelengths of 100GBASE-LR4/ER4 (1295.56, 1300.06, 1304.59, 1309.14) and the total value ■ Measurement results can be displayed in a graph for easy comparison ■ Manual input allows for measurements over a wide range (850–1650nm) *For more details, please refer to the PDF document or feel free to contact us.
No experience required, easy operation, high precision! Verifies fiber optic cable links in 3 seconds.
The "OX1-PRO-I" is a simple fault location tool manufactured by EXFO in Canada. It is a new trinity of light source, power meter, and fault location. With easy operation that does not require experience, it enables high-precision measurements. Complicated settings before measurement are also unnecessary, allowing anyone to quickly and easily locate faults. 【Features】 ■ Easy operation, high precision, no experience required ■ Verification of fiber optic cable links in 3 seconds ・ Displays cable length, insertion loss (IL), and optical return loss (ORL) ■ Measurement target is non-live single-mode fiber (maximum measurement distance of 40 km) ■ Battery operation: 10 hours, USB rechargeable *For more details, please refer to the PDF document or feel free to contact us.
Measurement accuracy is ±5%! Wavelength 1577nm, usable with 10GPON, optical power meter.
The "PX1-H" is a compact (225g) and advanced power meter manufactured by EXFO in Canada. The measurement accuracy is ±5%. It can transmit test results using Bluetooth. There are 11 calibration wavelengths, including 830nm, 850nm, 980nm, and 1300nm. 【Features】 ■ Wavelength 1577nm ■ Bluetooth (can transmit test results) ■ Easy operation with a touch panel ■ Wavelength measurement range (nm): 830 to 1625 *For more details, please refer to the PDF document or feel free to contact us.
Supports high-altitude wideband satellite digital broadcasting (4K/8K broadcasting)! Simultaneous measurement of high-altitude wideband satellite level, BER, and MER is possible.
The "LF-965" is a level meter compatible with advanced wideband satellite digital broadcasting (4K/8K broadcasting), satellite digital broadcasting (2K broadcasting), and terrestrial/CATV digital broadcasting in Japan. It can measure levels, BER, MER, C/N, and constellation for conventional satellite, terrestrial, and CATV digital broadcasting, as well as for advanced wideband satellite digital broadcasting. Additionally, it supports a wide frequency range of 10 to 1002 MHz for terrestrial/CATV measurements, allowing for measurements of high frequencies above 770 MHz from CATV upstream signals. 【Features】 ■ Capable of measuring high frequencies above 770 MHz from CATV upstream signals ■ Simultaneous measurement of level, BER, MER (or C/N), and determination of reception status by color ■ Uses a highly visible high-brightness 4-inch color TFT LCD for the display section *For more details, please refer to the PDF document or feel free to contact us.
We will assist you in obtaining authentication for communication protocols that can also integrate with cloud services.
At JEMIC, we assist customers in obtaining certification as a certified testing organization and certification body for the ECHONET Lite standard and ECHONET Lite AIF specifications. The ECHONET Lite standard is a communication protocol that supports over 100 types of devices, ranging from sensors to air conditioning and home appliances. It is recognized as a communication protocol for Home Energy Management Systems (HEMS) and can also help achieve Zero Energy Houses (ZEH). 【What is the ECHONET Lite standard?】 - Supports over 100 types of devices, from sensors to air conditioning and home appliances - Recognized as a communication protocol for HEMS - Can help achieve Zero Energy Houses (ZEH) - Capable of integration with cloud services *For more details, please refer to the PDF document or feel free to contact us.
Investigation of intermittent failures, which have been difficult to identify the cause of in long-term logging measurements, has also been clarified.
The "DSA1000" is a field-oriented quality measurement signal level meter that retains the measurement capabilities of the conventional DSA700 and DSA700S (FM radio, terrestrial digital, Sky Perfect! Light, BS/110°CS). With high-response operation and high-speed measurements, it accelerates measurement tasks in the field. It features simple operation with dedicated buttons for "single channel measurement," "scan measurement," "tilt measurement," and "BS/CS measurement." 【Features】 ■ Built-in demodulator for measuring 4K broadcast signals that started on December 1, 2018, and also supports 8K broadcast signals. ■ Affordable, easy to operate, and convenient to carry as a handheld type. ■ Usable with either the included battery or AC 100V commercial power supply. *For more details, please download the PDF or feel free to contact us.
A handy type that is easy to carry and easy to use anywhere!
- It is a compact handheld type, so you can carry it anywhere. - It is battery-operated. (An AC adapter can also be used as an option.) - The search coil can be connected directly. - The read value (display value) becomes the flux value (measured value) as is. - It is easy to handle because of its simplicity. - It has a 3-range switch.
The liquid level indicator is available in indoor wall-mounted type, outdoor wall-mounted type, and indoor panel-mounted type.
The "DL-800/800A・LKDL-800 Series" is a level meter with an intrinsically safe explosion-proof structure that can be safely used even for hazardous liquids such as designated fuel oils. It is an ideal product for managing the remaining quantity in fuel storage tanks for emergency and regular generators, as well as boilers and heating appliances, and for managing the remaining quantity in tanks and reservoirs storing liquid raw materials and products in the industrial market. 【Features】 ■ Magnetic coupling type, multi-point reed switch type ■ Safe for use with hazardous liquids such as designated fuel oils ■ Intrinsically safe explosion-proof structure ■ Liquid level indicators are available for indoor wall mounting, outdoor wall mounting, and indoor panel mounting *For more details, please refer to the PDF materials or feel free to contact us.
Approval of the mass standard management manual! A reliable analog hanging scale, the dial hanging scale, can be used with confidence.
This product is a dial hanging scale that excels in durability and simplicity. It features an easy-to-read analog display with a scale that has minimal breakdowns. The scale is inclined at a 30° angle, making it easy to read from below when lifted, and is available in both "inclined" and "flat" types. It is a product you can use with confidence, approved by the mass standard management manual. 【Features】 ■ Excellent durability and simplicity ■ Easy-to-read analog display with minimal breakdowns ■ Available in "inclined" and "flat" types *For more details, please refer to the PDF document or feel free to contact us.
Supports from low concentration (0 mg/L) to high concentration (approximately 12%)! For effective chlorine concentration management in deodorization.
The "RC-50T series" is a chlorine meter that easily measures sodium hypochlorite solution at 12%. It accommodates low concentrations (0 mg/L) to high concentrations (approximately 12%). It can be used for effective chlorine concentration management for deodorization. 【Features】 ■ No calibration required – no calibration needed like other electrode methods ■ Easy to operate – just add the sample (50 μL) ■ Measurement can be done in a short time ■ Excellent accuracy and reproducibility – unaffected by the operator's ability ■ Uses an electrochemical sensor – superior linearity compared to colorimetric methods *For more details, please refer to the PDF document or feel free to contact us.
From basic measurement to analysis, all in one device. It also supports integration into measurement systems.
The DM2571 is a high-precision, multifunction digital multimeter with a DC voltage accuracy of 35ppm (0.0035%) and a 6 1/2 digit display. It incorporates 12 types of measurement items including voltage, current, resistance, frequency, and temperature, as well as 9 types of calculation functions. Equipped with a versatile display and rich interfaces, it is also suitable for integration into measurement systems. 【Features】 ■ 6 1/2 digit display: 1,199,999 counts ■ DCV: Basic accuracy 0.0035% ■ DCI/ACI: 100μA to 10A, 100pA resolution ■ 4.3-inch color TFT ■ 12 types of measurement items and 9 types of calculation functions ■ High-speed sampling rate of up to 10k rdg/s ■ USB, LAN, RS-232C, digital I/O, GPIB (optional) *For more details, please refer to the PDF document or feel free to contact us.
LED-type power multimeter capable of measuring various electrical elements ★★★ Instruments for distribution boards, control panels, distribution panels, and panels.
This is a meter that measures and displays the phase voltage, current, active power, reactive power, power factor, frequency, active energy, and reactive energy of the distribution board, and enables remote power monitoring via RS-485 communication. Features: The measurement elements are displayed through three LEDs, and with just one button press, you can select and display the three-phase voltage, current, active power, reactive power, power factor, frequency, active energy, and reactive energy. The primary values of CT and PT can be set arbitrarily. Line-to-line voltage can be used without PT up to a maximum of 500V. For inquiries, please contact "lightstar_1979@yahoo.co.jp".
50-size analog meters! A variety of analog meters ranging from ammeters to frequency meters! Instruments for distribution boards, control panels, distribution panels, and panels.
The "KA□-50" is a guideline-type analog meter. You can choose from options such as alternating current, direct current, alternating voltage, and direct voltage, allowing you to place an order according to your preferences. *For more details, please refer to the PDF materials or feel free to contact us. For inquiries, please reach out to "lightstar_1979@yahoo.co.jp".
80 size analog meters! A variety of analog meters ranging from ammeters to frequency meters! Instruments for distribution boards, control panels, distribution panels, and panels.
The "KA□-80" is a guideline-type analog meter. You can choose from options such as alternating current, direct current, alternating voltage, and direct voltage, allowing you to place an order according to your preferences. *For more details, please refer to the PDF document or feel free to contact us. For inquiries, please reach out to "lightstar_1979@yahoo.co.jp".
08N size analog meter! A variety of analog meters ranging from ammeters to frequency meters! Instruments for distribution boards, control panels, distribution panels, and panels.
The "KA□-08N" is a pointer-type analog meter. You can choose from options such as alternating current, direct current, alternating voltage, and direct voltage, allowing you to place an order according to your preferences. The 08N type is almost the same as the 08, but the part where the reading is displayed is square instead of round. *For more details, please refer to the PDF document or feel free to contact us. For inquiries, please reach out to "lightstar_1979@yahoo.co.jp".
Multi-instrument for distribution boards with beautiful design and communication functions, combined meter ★★★ Instruments for distribution boards, control panels, sub-distribution boards, and panels.
This is an instrument that measures and displays various electrical parameters such as phase voltage, current, line-to-line voltage, active power, reactive power, apparent power, power factor, frequency, active energy, reactive energy, harmonic voltage, and harmonic current, and is configured to allow remote monitoring of the measured data via RS-485 communication. It displays various measurement values, including current usage rate, on a single LCD screen. Features: - Automatic maximum value storage and viewing - Separate display of active energy and generated energy - LCD screen that displays clearly even in sunlight - Equipped with RS-485 communication for remote power quality monitoring - Displays power components by page, making it convenient for beginners to use For inquiries, please contact "lightstar_1979@yahoo.co.jp". Power Multimeter
A multifunctional compact multi-instrument for distribution boards equipped with a beautiful design and communication functions, collective meter ★★★ Instruments for distribution boards, control panels, sub-distribution boards, and panels.
This is an instrument that measures and displays various measurement elements such as phase voltage, current, line-to-line voltage, active power, reactive power, apparent power, power factor, frequency, active energy, reactive energy, harmonic voltage, and harmonic current, and is configured to allow remote monitoring of the measured data using RS-485 communication. It displays various measurement values, such as current usage rate, on a single LCD screen. Features: - Automatic saving and viewing of maximum values - Separate display of used energy and generated energy - LCD screen that displays clearly even in sunlight - Equipped with RS-485 communication for remote power quality monitoring - Displays power components by page, making it convenient for beginners to use For inquiries, please contact "lightstar_1979@yahoo.co.jp". Power Multimeter
Multimeter equipped with leakage alarm function and various electrical element measurement functions ★★★ Instruments for distribution boards, control panels, distribution panels, and panels.
- Leakage Current Alarm Function Used to prevent leakage accidents in circuits, it connects with up to 16 zero-phase current transformers to measure current. When the current value exceeds the set threshold, it generates an alarm signal and sound. - Measurement Function Measures necessary electrical safety management parameters including line-to-line voltage, phase voltage, current, leakage current, active power, reactive power, apparent power, power factor, frequency, active energy, reactive energy, temperature (1CH), and phase. - Circuit Breaker Status Display and Control Function Receives input from circuit breaker status contacts to display the status with LEDs and generates relay contact output for circuit breaker control purposes. For inquiries, please contact "lightstar_1979@yahoo.co.jp". Power Multimeter
A multifunctional multimeter for distribution boards equipped with a beautiful design and communication functions, collective meter ★★★ Instruments for distribution boards, control panels, distribution panels, and panels.
This device measures and displays various measurement elements of the power system, allowing remote monitoring of the measured data via RS-485 communication, and it can store data. By inputting the PT ratio and CT ratio, it measures and displays the voltage, current, active power, reactive power, apparent power, power factor, frequency, active energy, and reactive energy for each of the total 12 channels by phase. It also displays the average, maximum, and minimum voltage, current, power, and power factor over time. Features: - Supports three-phase input with a total of 12 channels and 36 current inputs. - Channel changes and displays can be made via button input, making it convenient to check measurement information by channel. - Remote power monitoring is possible using RS-485 communication (MODBUS-RTU). - Allows confirmation and storage of measured data by connecting via USB. For inquiries, please contact "lightstar_1979@yahoo.co.jp". Power Multimeter
Loudness and Lissajous meter compatible with 12G/3G/HD-SDI, AES/EBU, and analog audio.
The "LjM3a-12G" is a loudness meter with support for 12G-SDI, 3G-SDI, HD-SDI, AES/EBU, and analog audio. In addition to the loudness meter and phase meter, it supports bar graphs, needle-type VU meters, loudness values, true peak, surround meters, event logs, and picture display. 【Features】 ■ Equipped with 32 channels of 12G/3G/HD-SDI input, 4 systems of AES/EBU 8 channels, and 2 channels of balanced analog audio input, using XLR for analog audio input. ■ The front panel is equipped with operation buttons and can also be operated via remote control. ■ Each measurement screen can be displayed in full screen or multi-screen (2, 3, or 4 screens). ■ The bar graph has 53 segments, and switching between VU and peak level is possible. ■ Peak hold function (OFF, 1.5 seconds, 5 seconds, ∞), etc. *For more details, please download the PDF or feel free to contact us.
We are a long-established company dealing with tube manometers!
Luminescence measurement. High-sensitivity single-tube measurement.
Offering various options and technologies! Addressing the needs of numerous assays and simplifying operations.
"Lumat" is a new type of tube luminometer aimed at high performance and ease of use. It is capable of both flash and glow luminescence applications. The optimized optical system calculates true single photon counting using a low-noise photomultiplier. The dynamic range extends to six digits. It can use not only "Eppendorf tubes" but also various lumivials, and can be equipped with up to two JET injectors for reagent dispensing (10-100μL or 25-300μL). 【Benefits】 ■ Confidence in results ■ Design that supports research ■ Easy operation *For more details, please download the PDF or feel free to contact us.
For measuring torque constant, cogging torque, and torque ripple!
The "EMoTS-02" is an ultra-low-speed dynamometer equipped with basic functions such as torque constant measurement, cogging torque, and torque ripple measurement. Additionally, by inputting the winding resistance, it is also possible to calculate the coil inductance during motor operation. Please feel free to consult us if you have any requests. 【System Configuration】 ■ Cogging Torque ■ Torque Ripple ■ Induced Voltage *For more details, please download the PDF or feel free to contact us.
