Metal fittings(6mm) - List of Manufacturers, Suppliers, Companies and Products

Last Updated: Aggregation Period:Jul 16, 2025~Aug 12, 2025
This ranking is based on the number of page views on our site.

Metal fittings Product List

46~60 item / All 61 items

Displayed results

Single pipe driving fitting [hammering - large]

No deformation of the single pipe even with powerful strikes! With a large target of 60mm, it ensures accuracy! It employs a tapered structure that efficiently transmits striking force.

By enlarging the striking area, it is designed to make it easier to hit with a hammer. The supporting side below can work with peace of mind. You can confidently and powerfully drive the Skat 91 or single pipes with a hammer! 【Features】 ■ Outer diameter Φ48.6, thickness 2.4mm specification ■ The target is large, making it easier for the hammer to hit ■ Fewer mis-hits with the hammer, providing reassurance for the person supporting ■ The heads (striking parts) of single pipe piles [Skat 91] and single pipe do not deform ■ Single pipes can also be driven directly ■ No rebound during striking ■ Treated with hardening processing for long-term use *For more details, please download the PDF or feel free to contact us.

  • Steel structure construction
  • Foundation construction
  • Pile and foundation work

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Connection fittings for connecting beams and single pipes【Tsunagood】

Safe for one person! Quickly drive in stakes of any length, and they are reusable!

The single pipe joint was born from the urgent desire of construction sites to drive long stakes safely and easily. It can securely connect with the single pipe stake "Scat 91," allowing for deep driving! It connects firmly enough that it can be extracted as a single stake even after being pulled out. With "Tsunagood," you can extend the length of the stake while maintaining strength, adapting it to the ground conditions and site situation. Since it is a completely internal joint type, you won't have to worry about protrusions that interfere with driving. ~ Features of the connection fitting "Tsunagood" ~ ■ Outer diameter φ48.6, thickness 2.4 mm specification ■ The length of the stake "Scat 91" can be extended according to ground conditions. ■ You can safely drive stakes alone with both feet always on the ground, regardless of the construction situation. ■ No need for a standing horse or ladder, no matter how long the stake is. ■ It can be reused. *For more details, please download the PDF or feel free to contact us.

  • Temporary Construction Materials

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

ABC Parts Button/Switch Mounting Bracket Fixed Type for Breaker Installation

When you want to install switches, indicator lights, etc., for φ22 and φ33 on the base for the slim breaker.

【Features】 ■ Compatible with JIS standard circuit breakers (slim breakers) for lighting distribution boards, making installation, expansion, modification, and alteration easy. ■ The body surface of the BDK-3-30B is coated in black paint, making it less noticeable even when used alongside breakers or with some fittings exposed. ■ Wiring can be easily routed through the round holes and notches on both sides. Additionally, end face protection using commercially available rubber bushings is also possible. *For more details, please refer to the PDF materials or feel free to contact us.

  • Structural Materials

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Flat Width Stopper Fitting

Uses new high-tensile steel plates! Please use it in areas where dripping is a concern.

The "Flat Width Stop" is a newly adopted width stop fitting made from a thin yet strong high-tensile steel plate. It can be used for both the outer and inner perimeters of a flat foundation. It suppresses the drooping of mortar that occurs at the joint between the base and the vertical rise. There is an engraving on the back, so it can be easily identified even if mixed with other sizes. 【Features】 ■ Usable for both the outer and inner perimeters of a flat foundation ■ Newly adopted high-tensile steel plate that is thin yet strong ■ The product thickness (1.6mm) is extremely thin, making it difficult for mortar to spread ■ Features a φ13 hole in the center and nail holes in the panel receiving area ■ Includes slits, allowing the panel receiving part to be easily removed after formwork *For more details, please refer to the PDF document or feel free to contact us.

  • Work tools
  • Reinforcement and repair materials

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Suspension Fitting

A fitting for hanging bolts from C-shaped steel, H-shaped steel, channels, and other ceiling framing materials.

【Popular Products】 1) LG Hook - For C-shaped steel - Simple and easy to install - Can be installed without going up to the suspension point - Hook the hardware onto the lip of the C-shaped steel and tighten the suspension bolt to secure it - Available for 3-inch and 4-inch sizes 2) Slide LG Hook - For C-shaped steel - Integrates "Special LG Hook" and "Special LG Hook Reinforcement Hardware" with rivets - Easy installation as temporary fixing can be done on the "Special LG Hook" side - Finally, slide the "Special LG Hook Reinforcement Hardware" side up and secure with screws - Available only for 3-inch size 3) H Steel Grab - Compatible with C-shaped and H-shaped steel - Hardware that can be directly fixed with screws to H-shaped steel (up to 12mm flange thickness) - Easy installation as temporary fixing can be done with the upper M5 bolt before screw fixing - Available for 3-inch and 4-inch sizes - For seismic-resistant ceilings and wind pressure-resistant ceilings 4) H Steel Grab [Free] - Compatible with C-shaped and H-shaped steel - Hardware that includes pendulum components with the "H Steel Grab" - Pendulum components can be installed in both the orthogonal and parallel directions of the base material! - Maximum slope of 60 degrees - Available for 3-inch and 4-inch sizes

  • Metallic base

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration