Metal fittings(1*4) - List of Manufacturers, Suppliers, Companies and Products

Last Updated： Aggregation Period:Nov 05, 2025～Dec 02, 2025
This ranking is based on the number of page views on our site.

Metal fittings Product List

61～75 item / All 147 items

Displayed results
Mounting brackets for solar panels

Mounting brackets for solar panels

For the installation of solar panels! Use simple and standard mounting hardware (fasteners, clamps, fixing brackets) for the single-pipe frame!

The "solar panel mounting bracket" is a product that allows for easy and safe installation from underneath the panel. Installation can be done simply by hooking the bracket onto the solar cell and tightening the bolt securely, designed to be inexpensive and durable without compromising the benefits of the single pipe. 【5 Key Points】 ■ Easy and safe installation from underneath the panel ■ Approximately 1 ton of pulling strength with 4-point mounting ■ Resistant to snow and dust accumulation ■ High weather resistance and durability ■ Mainly uses domestically produced materials *For more details, please download the PDF or feel free to contact us.

  • Solar mounting brackets and fittings (solar fittings and protective sheets)

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Reducing burdens such as on-site operations and cost management! High-efficiency "excess length processing fittings."

Reducing burdens such as on-site operations and cost management! High-efficiency "excess length processing fittings."

Construction time can be significantly shortened! Since there is only one component, the risk of component drop is reduced, and it can be installed anywhere without restrictions.

The excess length processing fitting "Rakumaki" is specifically designed for thin-diameter cables such as small core aerial optical cables, significantly reducing construction time from 30 minutes to 10 minutes. When coiling excess length with only drop cables, there was a risk of disconnection due to wind or vibrations, but by using the excess length processing fitting, it can be held in a stable condition, preventing disconnections. It does not take up space inside the gondola, improving workability, and can be installed even at a distance from the utility pole, eliminating obstacles to the climbing route. The compact design of the fitting also means there is no need to worry about contact with other lines. Additionally, compared to conventional products, costs can be reduced to about one-third to one-fourth. 【Features】 ■ Shortened construction time ■ Cost reduction achieved ■ Prevention of cable disconnections ■ Improved safety ■ Can be installed in various locations *For more details, please refer to the PDF document or feel free to contact us.

  • Steel

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Furniture and cabinet assembly hardware, knock-down hardware "Cabineo"

Furniture and cabinet assembly hardware, knock-down hardware "Cabineo"

A new type of knockdown fitting, "Cabineo," that enables the reduction and simplification of CNC processing and assembly labor for various cabinets and knockdown furniture.

It has the following advantages compared to conventional knockdown fittings: (1) Easy processing of the fitting attachment area (can be processed with a 3-axis CNC machine) (2) Easy attachment of fittings (3) Even after fitting attachment, stacking of components and efficient transportation are possible (4) Simply align with the side panel and screw in with a cordless driver to complete (5) Assembly is secure by firmly pulling the side panels together (6) Reduction in the number of workers due to decreased processing and assembly man-hours

  • Other fixtures and fittings

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Stainless Flat Type Fix "OT-G360F-SUS"

Stainless Flat Type Fix "OT-G360F-SUS"

Achieve a flat glass surface! Can be installed on flat bars and supports.

Fixed hardware for holding glass panels. Since it has a flat head shape, there is no protrusion on the glass surface. Additionally, the position of the glass can be adjusted. ★POINT★ ● Compatible glass thickness: OT-G360F-SUS-1: 8–18mm, OT-G360F-SUS-2: 8–12mm ● Allowable load: 70kg (when using 4 units and mounted vertically) ● Made of stainless steel, it has excellent corrosion resistance. ◇◇◇◇◇◇◇◇ Joe Prince Takeshita Co., Ltd. ◇◇◇◇◇◇◇◇ Feel free to consult Joe Prince regarding hardware components. Osaka Branch: 06-6747-2591 Tokyo Branch: 03-3633-8505 Nagoya Branch: 052-893-0792 Fukuoka Sales Office: 092-483-8566

  • Support hardware/opening hardware

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Technical Report: Corrosion Resistance of Snow Stoppers (Composite Cycle Test)

Technical Report: Corrosion Resistance of Snow Stoppers (Composite Cycle Test)

Apply JASO M 609-91! Conduct tests that repeatedly expose to salt spray, drying, and humid environments.

In this document, we introduce the "corrosion resistance of snow stop fittings." To simulate and promote natural environmental conditions, we conduct a corrosion testing method called "composite cycle testing," which involves repeating salt spray, drying, and wetting atmospheres. One cycle consists of salt spray for 2 hours, drying for 4 hours, and wetting for 2 hours, totaling 8 hours. We have published the test results for cycles 0, 60, and 120, so please take a look. [Contents] ■ Testing Method ■ Test Results *For more details, please refer to the PDF document or feel free to contact us.

  • Others/Roofing materials (shingles, cement, steel sheets, aluminum)
  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
【ハヤテク】吊りボルト・丸鋼用□WC支持金具　SD-912WCS

【ハヤテク】吊りボルト・丸鋼用□WC支持金具　SD-912WCS

ケーブル＆電線管をスピーディーに施工！技あり省施工シリーズの□WC支持金具

『SD-912WCS』は、ワンタッチで仮止めができ、高さ調整が容易に行える 吊りボルト・丸鋼用□WC支持金具です。 吊りボルトの中間から取り付けできるため、既設の吊りボルトを利用できます。 支持金具を2個取り付けできるので、ケーブルの多条敷設の際便利です。 また、2本の電線管を支持できる吊りボルト・丸鋼用電線管支持金具「SD-TPC4S」も ご用意しております。 【特長】 ■片手でワンタッチ ■仮止め・高さ調節も可能 ■取り付け10秒 ■既設の吊りボルトを利用可能 ■W3/8、W1/2に兼用できる ※詳しくはPDF資料をご覧いただくか、お気軽にお問い合わせ下さい。

  • Support hardware/opening hardware

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
H-shaped steel beam suspension fixture "Revo Grip Indoor RG Series"

H-shaped steel beam suspension fixture "Revo Grip Indoor RG Series"

Calculate clear design strength through unique strength calculations! Create a strength calculation report based on existing H-shaped steel sizes and the CT steel sizes to be used.

We would like to introduce our indoor H-beam suspension fixed fittings, the "Revo Grip RG Series." The installation part accommodates two locations and is compatible with H-beams up to 200mm in width and 19.0mm in flange thickness. The basic set includes 9 items: CT steel, grip plate, filler plate (1mm to 10mm), high-tensile bolts, high-tensile washers, and QC nuts. Please feel free to contact us if you have any inquiries. 【Lineup】 ■RGS-100 ■RGS-125 ■RGS-150 ■RGS-175 ■RGS-200 *For more details, please download the PDF or feel free to contact us.

  • Joints between components

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[New Product] WEO 420 Plugin Hose Fitting

[New Product] WEO 420 Plugin Hose Fitting

Maximum operating pressure 42MPa, for general hydraulic use, plug-in type connector (fitting).

In line with the trend for higher hydraulic pressure, the WEO 420 is a high-durability solution designed for higher hydraulic pressures. The maximum operating pressure is 42 MPa, and it is treated with zinc-nickel plating to enhance corrosion resistance. The HNBR seals are designed to accommodate higher operating temperatures. The WEO 420 is suitable for machines that require higher hydraulic pressure and operating temperatures, such as cranes and skid steer loaders. The fittings have no screws and simply plug into the hydraulic system. There is no need to manage assembly angles, allowing for safe and quick connection of hydraulic hoses without the use of tools.

  • forklift

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
SPEED fastening hardware "Return Buckle ARA"

SPEED fastening hardware "Return Buckle ARA"

Significant reduction in working hours! SPEED fasteners that can be easily transported to high places.

The "Return Buckle ARA" is a compactly designed SPEED fastening device that is convenient for storage and portability. The turnbuckle, which could only be turned by hand, can now be tightened and removed using tools such as electric drills, impact drivers, and ratchet wrenches. This reduces the need for leaning over or using both hands for tasks, thereby improving safety. 【Features】 ■ Significant reduction in work time ■ Compact design that is half the length of a standard one ■ Portable to high places ■ Enhanced safety ■ Sample available for loan *For more details, please refer to the PDF document or feel free to contact us.

  • Company：Rtb
  • Price：Other
  • Fastening hardware

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Completely non-welded fitting "GT Hook BW Type"

Completely non-welded fitting "GT Hook BW Type"

Enhance the twisting strength of the rebar cage and prevent buckling and deformation! Main reinforcement and support frame fixing hardware.

The "GT Hook BW Type" is a completely weld-free fixture for fixing main rebar and reinforcement frames (flat bars). By appropriately using the reinforcement frame (flat bar) and employing anti-twist reinforcement bars, it enhances the twisting strength of the rebar cage and prevents buckling and deformation. 【Features】 ■ Fixes anti-twist reinforcement bars ■ Fixes main rebar and reinforcement bars ■ Used in approximately 4 locations around the circumference ■ Enhances the twisting strength of the rebar cage and prevents buckling and deformation *For more details, please refer to the PDF document or feel free to contact us.

  • Expansion joint hardware

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Inch conversion fitting

Inch conversion fitting

It is a fitting that adjusts and converts the mounting pitch of devices with different standards such as JIS, EIA, and ETSI.

This is a bracket that converts and adjusts the mounting pitch when the mounting widths of the equipment differ. It is designed to adjust and convert the mounting pitch of equipment according to different standards such as JIS, EIA, and ETSI. It can be manufactured for each U size, so please consult us regarding the dimensions.

  • Safes, Cabinets, Lockers

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Mounting brackets for single pipe frames! 'Mounting brackets' for solar panels.

Mounting brackets for single pipe frames! 'Mounting brackets' for solar panels.

For the installation of solar panels! Simple and standard mounting brackets for single-pipe frames! Leave the single-pipe frames to Ishii Construction.

The "solar panel mounting brackets" are products that allow for easy and safe installation from underneath the panels. Please make use of the simple and standard mounting brackets (fasteners, clamps, and fixtures) for the single-pipe frame. Installation can be done simply by hooking the brackets onto the solar cells and tightening the bolts securely, designed to be inexpensive and durable without compromising the advantages of the single-pipe frame. 【5 Key Points】 ■ Easy and safe installation from underneath the panels ■ Approximately 1 ton of tensile strength with 4-point mounting ■ Resistant to snow and dust accumulation ■ High weather resistance and durability ■ Mainly made from domestically produced materials *For more details, please download the PDF or feel free to contact us.

  • Solar mounting brackets and fittings (solar fittings and protective sheets)

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Camera tripod mounting bracket (with earth mounting butterfly bolt) TRS3

Camera tripod mounting bracket (with earth mounting butterfly bolt) TRS3

A bracket for attaching a mobile antenna that requires grounding to a camera tripod.

● TRS3 (TRS-3) is a mounting bracket for camera tripods manufactured by Daiwa (Diamond), equipped with a butterfly bolt for grounding. ● It is a bracket for attaching mobile antennas that require grounding to a camera tripod. * The grounding effect increases the longer the ground wire is in contact with the ground. If the ground wire is elevated from the ground or deployed on a balcony, the radial effect decreases, and the SWR may not improve. In this case, increasing the number of ground wires or lengthening the ground wire can help. When installing on a balcony, connecting the ground wire to the railing may improve the situation. ● Comes with an MLJ-MJ connector and a 20cm 3D-2V coaxial cable. ● Since it includes a butterfly bolt for grounding, the ground wire can be secured with the butterfly screw. ● Ideal for operating mobile station radios. ● Complies with the European environmental regulation RoHS directive. * For more details, please feel free to contact us.

  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Ministry of Land, Infrastructure, Transport and Tourism NETIS registered product: Wire method for fall and drop prevention *Patent obtained

Ministry of Land, Infrastructure, Transport and Tourism NETIS registered product: Wire method for fall and drop prevention *Patent obtained

A reliable construction method registered with Netis. One-touch operation allows for up to 10 times the workability of conventional methods. No cutting or clip/rivet work required. *Beware of similar products.

Lockable Plus: A reliable construction method registered with NETIS. Highly regarded mainly in construction and at train stations. Installation is completed with a simple one-touch operation by just threading the wire through the hanger, without the need for special tools. Equipped with a safety lock for emergencies. It is an effective solution against vibrations and falls of equipment. In an era of labor shortages, this construction method allows for accurate installation regardless of age, gender, or nationality. Equipped with a safety lock for emergencies. ■ Quick installation - No troublesome bolts or screws for locking required ■ Easy to apply tension, and re-tensioning is also possible ■ Designed with safety and security in mind, it can be used for high loads. With overwhelming workability, it supports "labor-saving and efficiency." "Ministry of Land, Infrastructure, Transport and Tourism NETIS Registration Number: KK-200052-A" "Patent: Patent No. 5964223" * Economic efficiency "improvement (49.42%)": Labor costs are reduced due to improved workability, and material costs are further reduced due to a decrease in the number of products used. * Process "shortening (91%)": Due to improved workability. <NETIS details: https://protect-eu.mimecast.com/s/baqQCl5yOS2l6L0HGgdZ4?domain=netis.mlit.go.jp> * For more details, please contact us.

  • Safety and consumables

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Japanese-style roof snow guard fittings "Wagata Fuugetsu" for tile roofs.

Japanese-style roof snow guard fittings "Wagata Fuugetsu" for tile roofs.

The beauty of curves that blends with harmony. Snow stop fittings with excellent design that match traditional Japanese tiles.

"Wagata Fuugetsu" is a snow stop fixture with excellent design that matches the beautiful curves and rich colors of traditional Japanese tiles. It harmonizes naturally with the tiles, resulting in a beautifully finished overall appearance of the roof. We offer a lineup suitable for both retrofit (existing buildings) and pre-installation (new buildings) types. You can choose from various colors to match the appearance of your roof. 【Product Specifications】 ■Material: SUS304 ■Thickness: Blade = 1.5mm, Foot = 2.0mm *For more details, please refer to the PDF document or feel free to contact us.

  • Metal roof
  • Others/Roofing materials (shingles, cement, steel sheets, aluminum)
  • Roof and gutter construction

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Search Keywords Related to Metal fittings

COPYRIGHT © 2001-2025 IPROS CORPORATION ALL RIGHTS RESERVED.