Last Updated： Aggregation Period:Jul 30, 2025～Aug 26, 2025
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Jul 30, 2025～Aug 26, 2025
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Jul 30, 2025～Aug 26, 2025
This ranking is based on the number of page views on our site.
31～45 item / All 74 items
Temporary stage ladder "Foreman"
This is a temporary staircase that can be easily installed and removed on-site. It comes with handrails and can be attached on either side, allowing it to be adapted to the site. It can be compactly stored, making transportation easy.
Recommended for landscapers! Lightweight standard type double ladder.
The "2-Section Ladder (Lightweight Standard Type)" is a popular type of ladder that incorporates the know-how of advanced models while achieving weight reduction. Maximum load capacity is 100kg. It features a steel lock that securely engages with the steps. Additionally, the foot fittings are finished with zinc plating and have rubber on the underside. 【Specifications】 ■ Model: HE2-51/HE2-61/HE2-71 ■ Total Length: 517cm/584cm/718cm ■ Folded Length: 316cm/349cm/416cm ■ Weight: 11.5kg/12.6kg/15.6kg *For more details, please refer to the PDF document or feel free to contact us.
Have you ever almost slipped while climbing a ladder or stairway? Protect your life in case of an emergency! Acrobat vertical wire type!
Have you completed fall prevention measures for ladder and stairway ascents and descents? When using ladders and stairways, many workers and companies express concerns such as: - Workers are getting older, and there are worries about their physical strength during ascents and descents. - Hands and feet may get wet from rain, making them slippery. - There is a feeling of danger of falling due to being buffeted by the wind. The Acrobatic vertical wire type solves these issues without modifying existing equipment! 【Features】 - Smooth sliders enable smooth ascents and descents. - In case of emergency, the stopper function activates to prevent falls. - The built-in shock absorber absorbs impact, reducing strain on the body and ladder. - The special structure allows for safe and easy removal of the slider. - Simple installation is possible without modifying the equipment, allowing for retrofitting. - The wire can be adjusted to match the length of the ladder. Acrobatic is a fall prevention system that "permanently establishes high-altitude safety measures." It is also compatible with the new full harness fall arrest devices that became mandatory for use in 2022. *You can download the PDF materials in bulk from the link below (official site). Please feel free to contact us!
This is an evacuation ladder for small-scale mixed-use buildings (specific fire protection objects such as certain staircases, multi-tenant buildings).
【Features】 ○ Designed for use in mixed-use buildings, it can be easily deployed and used for evacuation with a single action (one-touch) that anyone can understand. ○ Adopts a serial descent method, enabling continuous evacuation for multiple people. ○ As an external evacuation device, it does not encroach on indoor space. ○ Measures to prevent falls have been implemented with ladders and protective bars that extend to enclose all sides, along with fixed hooks. ○ The fixed ladder method allows for a safer forward transfer with less risk. ○ The adoption of a lower-floor storage method makes storage operations easier and reduces the burden during maintenance. ○ Its unique structure reduces the load on wall surfaces, making installation easier in existing mixed-use buildings and similar structures.
This is a low-level evacuation ladder designed for easy and reliable operation and safety, intended for evacuation from low floors below the third floor.
【Features】 ○ By simply tilting the extension lever and lightly pulling out the vertical bar, it is now possible to extend and evacuate. ○ The ladder fixed to the wall has no shaking, ensuring safety and allowing for continuous evacuation of multiple people. ○ It cannot be extended from the ground, providing excellent security. ○ The extension protrudes only 404mm, making it very compact. ○ Made of aluminum, it is a highly durable evacuation ladder. ○ Being an external (wall-mounted) type, it does not encroach on indoor space. Compared to indoor evacuation devices, living spaces can be used more effectively. ○ It can also be applied to specific fire protection objects such as three-story buildings (small-scale mixed-use buildings).
This is a nationally certified hatch storage type embedded evacuation ladder designed to be installed on balconies of apartments. For double ceilings.
【Features】 - The case is made entirely of stainless steel and incorporates a steel ladder. - The ladder is designed for safety with minimal swaying; it is usually stored in the case but can be deployed in one motion for safe evacuation to the lower floor when in use. - It is equipped with an auto child lock that engages automatically when the top cover is closed, providing peace of mind for households with small children.
High sense of security at your feet with outrigger equipment! Can be widely utilized in combination with options.
"Rentai" is a three-section telescopic ladder that pursues how to ensure safety without compromising work efficiency. The extension ropes for the upper and middle ladders are independent, eliminating the need for a specific operating sequence during ladder extension. Furthermore, the ropes are of a circulating endless type, so they do not get tangled around your feet while ascending or descending, allowing for safe and secure work. Additionally, it comes standard with outriggers that have a horizontal level adjustment function to stabilize the ladder during ascent and descent (Type A). 【Features】 ■ Equipped with a separate type of endless rope ■ Side seal that clearly indicates the leaning angle ■ Available in two types ■ Maximum load capacity of 130kg for all sizes ■ Standard equipped with outriggers with a horizontal level adjustment function (Type A) *For more details, please refer to the PDF document or feel free to contact us.
Lightweight and easy to carry and set up! Connectable for adjustable length! By installing a back basket, the risk of falling is reduced, ensuring safety during ascent and descent.
Introduction of the aluminum ladder "Vertical Aluminum Step" for excavation site use 【Features】 ■ Compatible with all types of simple vertical earth retention ■ Lightweight aluminum construction (approximately 14.8 kg for standard height of 2.4 m) * The standard height is the length up to the top of the hook. ■ Height can be freely combined using connecting components (0.7 m, 1.0 m, 2.0 m) * Connecting components (0.7 m, 1.0 m) can be connected up to 10 units * Connecting components (2.0 m) can be connected up to 5 units The hook width can be adjusted to match the installation location, such as the top of sheet piles or bracing. Connections can be made easily with a one-touch mechanism. * For more details, please download the PDF or contact us.
This is a three-section ladder with a maximum load capacity of 100 kg.
We achieved a reduction in product weight compared to conventional products with a unique sheath pipe structure at the thinnest width of 130mm for the support beam.
Maximum allowable weight 150kg
This is a dual-sided ladder that allows you to choose an angle of 60 or 70 degrees from the installation location, making it easy to ascend and descend with a gentle angle and wide steps, providing excellent stability.
The entire frame material is made of fiberglass, and the step part is made of aluminum.
At Sugaki Mechanical Industry Co., Ltd., we handle "FRP Ladders and Insulated Ladders." We use large rubber foot fittings that excel in insulation and anti-slip effects. They boast an electric resistance of 20,000V (measured between the lowest step and the ground). Additionally, the entire frame material is made of fiberglass, while the steps are made of aluminum. For more details, please contact us. 【Product Specifications (Excerpt)】 <FRP Ladder and Step Ladder> ■ Model: RG-12A ■ Platform Height: 1.14m ■ Length when used as a ladder: 2.40m ■ Weight: 7.3kg, etc. *For more information, please refer to the PDF document or feel free to contact us.
特注色にも対応！安心して使える工夫を施したオーダー品をご提供
『オーダーロフトハシゴ』は、3～12段まで様々な形状、サイズに 対応しています。 高さを自由に設置できるハシゴ用手摺が、安全な昇降をお手伝い可能。 また、壁付けフック受け(パイプ)と フックの組み合せでハシゴのズレ を防止します。ご要望の際はお気軽にお問い合わせください。 【カラーバリエーション(一部)】 ■ホワイト(塗りつぶし) ■ブラック(塗りつぶし) ■クリアー ■レッド(着色木目出し) ■グリーン(着色木目出し) ※詳しくはPDF資料をご覧いただくか、お気軽にお問い合わせ下さい。
It will be a temporary access passage! An aluminum ladder used for ascending and descending steel columns.
The "aluminum ladder" is a ladder that serves as a temporary access route during assembly work on beams at construction sites. The steel columns that can be installed are column-type, H-type, or I-type with sides measuring 300 to 650 mm. For columns less than 300 mm or round columns, please consult us separately. There is also a device called "Easy Climber" for attaching the ladder to steel columns. 【Features】 - Attachment and detachment to steel columns are done using a belt. - The ladder attachment bar allows for the ladder to be attached and detached independently. → Work can be done quickly without damaging the steel columns. - There is no need for troublesome tasks such as welding traditional steps, removing welded steps, or repairing steel columns. - Available for lease or sale. For more details, please contact us or download the catalog. If you would like us to contact you or visit, please feel free to reach out through the inquiry form below.
Lightweight and durable aluminum loft steps! The floor contact points feature adjustable legs (wood) for length adjustment.
S・DC Corporation offers a series of ladders for lofts (loft steps). The "Aluminum Loft Steps" come in a stylish "Economy Type" with a white base and a "Deluxe Type" with a black base that has a sense of heaviness. Additionally, as examples of sets, we have a large tatami-covered inspection hatch that can be opened and closed, called the "Gas Damper Type Large Tatami Under Opening Hatch," and a custom-made aluminum underfloor lifting step that can be used in combination with the "Gas Damper Type Underfloor Opening Hatch." 【Lineup】 ■ Aluminum Loft Steps Economy Type: NLS-210EN, NLS-240EN, NLS-270EN ■ Aluminum Loft Steps Deluxe Type: NLS-210DX, NLS-240DX, NLS-270DX ■ Custom-made Aluminum Underfloor Lifting Steps (some in stock): UDS-□□EN (□ is a numerical value) *For more details, please refer to the related links or feel free to contact us.
