Knife Product List and Ranking from 15 Manufacturers, Suppliers and Companies

Air nozzle slit air nozzle TAK type for blower air knife

Long air nozzle compatible with blower air, ideal for wide curtains, drainage, drying, and dust removal.

The design was made to ensure an even velocity distribution through fluid analysis. The product is available in single-side supply and double-side supply types. 【Features】 - Dedicated for blower air - Compatible slit width (injection range) 100 to 4000 mm - Air supply ports can also be made with a screw type ★Demo machine rental service currently available★ We are offering a demo machine rental service for the slit air nozzle. Please use it as a reference for performance confirmation and specification determination before introduction.

Company：共立合金製作所 / 総代理店　エバーロイ商事株式会社
Price：Other

others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Comprehensive Catalog of Sonic Corporation Blowers and Air Knives for the Food and Beverage Industry

Sonic's blowers and air knives use high-speed air of up to 25.4 m/sec for water removal and drying! Energy-saving blowers! Demo units available for loan!

Are there any issues with the water drainage and drying processes for beverages, food, and food processing, as well as the blowing off of water droplets from cans, bottles, and PET bottles? ------ Such issues can be efficiently and economically resolved by the Sonic Air Knife System's high air volume and high-speed air! Tasks that previously required pressure like that of a compressor can now be achieved with just 29 kPa! When comparing the air volume of a compressor and a Sonic Blower, obtaining an air volume of 7 m³/min requires 62.5 horsepower from a compressor, whereas the Sonic Blower achieves this with only 4 horsepower. The difference is significant when compared to compressors and domestic blowers! 【Features】 ● Energy-saving effect reduces consumption by 75% compared to compressor air ● Water drainage efficiency of over 95% ● Generates a large volume of air with low horsepower ● The air is clean and dry, promoting evaporation with warm air at approximately 40°C ● Energy-efficient (compared to compressors) ● Lightweight and compact design *Demo units are available for loan, so please feel free to contact us. Additionally, if you can provide samples for testing, we will conduct tests at our company.

Company：ティックコーポレーション本社
Price：Other

others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Sonic Case Studies: Steel Industry [Removal of Residuals on Plates]

Using it before the final drying provided results that exceeded expectations in terms of drying effectiveness.

Sonic Corporation's 96” (2.44m) air knife operates with the Sonic 100 (15 horsepower motor). Long steel plates flow under the air knife at a speed of 1.22m/min to 3.05m/min. The widths of these steel plates range from 48” to 96” (1.22m to 2.44m). Typically, this line runs for several days in two shifts and then stops for several days. Essentially, it operates continuously without stopping during the given shifts. This system provides unparalleled satisfaction to customers and has demonstrated exceptional drying effectiveness when used before final drying to blow away a significant amount of residual water. [Content] [Issues] ○ After blasting the material, it needs to be wiped and all remaining sand particles must be completely blown away. ○ In special cases, residual shot may occur after passing through the cleaning brush. ○ Residual shot material sticks to large electromagnetic surfaces, making transportation hazardous. For more details, please contact us or download the catalog.

Company：ティックコーポレーション本社
Price：Other

others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Sonic Water Drainage Drying Case Study Collection: Removal of Residual Water After Pallet Cleaning

I have made it possible to repeatedly position the air knife.

We proposed 12 Sonic 70 blowers with 7.5 horsepower motors, enclosures, Sonic HEPA filters, and two custom 13" Sonic XE air knives. The performance of the air knives delivered at the beginning of this system perfectly matched the blow level requested by the customer. The results of the impurity contamination tests also confirmed that Sonic's HEPA filters maintained the requested 0.3μ. Additionally, to operate most effectively while keeping the noise level below 80dB, the angle and distance of the air knives are very important, so we manufactured custom Sonic air knives that fit the existing air knife enclosures, allowing for repeated positioning of the air knives. [Content] [Issues] - Compressed air with HEPA filters - The factory was using more compressed air for automatic devices on the production line and other equipment on a daily basis - Due to the increased demand for compressed air, there was a need to add another air compressor to avoid pressure drops For more details, please contact us or download the catalog.

Company：ティックコーポレーション本社
Price：Other

Conveyor

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Sonic Water Drainage Drying Case Collection - Propane Gas Cylinder

Tilt the two air knives slightly and present a blowing method that focuses on the torso and upper part.

The air knife's gap or slot can be adjusted in length to allow for a wider gap. This means that the air knife concentrated on the body can maintain a standard gap while separately adjusting the knife's gap at the top and bottom to hit the handle and the lower ring. This method not only ensures that the air effectively hits the body of the canister but also reduces the required power consumption. SONIC has also suggested further cost reductions by using ABS piping instead of plated steel pipes to lower prices. [Content] [Issues] ○ Yankee Gas faced the problem of propane gas canisters not being sufficiently dry before going to the painting process while changing their solvent-based painting system. ○ Proper drying of the canisters is essential for effective painting. ○ The drying method they were using involved compressed air, which was ineffective and did not adequately remove moisture for painting. ○ High humidity means that no matter how much compressed air is applied, moisture remains on the canisters. For more details, please contact us or download the catalog.

Company：ティックコーポレーション本社
Price：Other

Conveyor

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Sonic Air Knife (Standard Type) by Sonic Corporation *For Blower Use Only

Improved air knife of the conventional Tear Drop (tear-shaped) design! Enhanced blowing efficiency!!

■High-Speed XE Air Knife The Sonic Corporation's High-Speed XE Air Knife nozzle, further improved from the conventional Tear Drop shape, achieves excellent work efficiency. It efficiently laminarizes the air, resulting in minimal pressure loss and uniform blowing across the entire slot. A key feature is that there are no control plates inside the air knife, allowing for uniform blowing from end to end. Additionally, it effectively draws in the surrounding air to create a powerful blow. We offer a wide variety of options for the number, position, direction, and length of the nozzle's piping installation. We also provide the world's only rotary air knife.

Company：ティックコーポレーション本社
Price：Other

Conveyor

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Must-read before selection! 'Trivia about Air Knives'

Are you having trouble with the essential "water droplet removal and drying process" after cleaning? We will provide you with a booklet that includes case studies on solving post-cleaning issues across various industries!

Are you having trouble with the blow process using air? There is always a cleaning process for parts (such as components) and products (like PET bottles and retort pouches). Following that process, there is always a drying process. I have heard that this drying is an eternal theme. Shall we finally resolve this eternal theme? Sonic's blowers and air knives efficiently and economically solve problems with high air volume and high-speed air! ▼ A task that required 0.4 MPa of pressure can now be achieved with just 29 kPa! ▼ When comparing the air volume of a compressor and a Sonic blower, to achieve an air volume of 7 m³/min, a compressor requires 62.5 horsepower. In contrast, the Sonic blower can achieve this with only 4 horsepower. The difference compared to compressors and domestic blowers is significant! The "Air Knife Trivia" section includes numerous case studies for problem-solving. 【Examples of cases】 ■ Automotive industry case studies ■ Food and beverage industry case studies ■ Pharmaceutical industry case studies ■ Steel industry case studies, etc. *For more details, please request materials or view the PDF data from the download.

Company：ティックコーポレーション本社
Price：Other

Conveyor

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Paper knife with magnifying glass 1560

The top of the paper knife has two types of simple magnifiers attached. A plastic lens (for placing) with 2x magnification and a small lens (for holding) with 5x magnification.

The top of the paper knife has two types of simple magnifiers attached. Plastic lens (just place it) with 2x magnification & small lens (hold it up) with 5x magnification. A very convenient multipurpose magnifier!

Company：池田レンズ工業
Price：Less than 10,000 yen

Office supplies and stationery
Other office supplies

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Slice Metal Handle Utility Knife 10491

A safe Slice cutter that is less likely to cut your hands! It can prevent injuries and workplace accidents, and has approximately 11.2 times the wear resistance compared to metal blades!

【Features of Slice Safety Cutter】 - The patented Finger-Friendly blade design makes it difficult to cut your hand, ensuring safety. *This product does not guarantee that it cannot cut at all. - It has approximately 11.2 times the wear resistance compared to metal blades and does not rust, allowing for long-lasting sharpness. - Some Slice safety cutter products are designed so that the blade does not extend excessively, enabling safe unpacking and opening without damaging the contents. - It supports cost reduction by preventing workplace accidents and injuries, preventing product damage during unpacking, and reducing the frequency of blade replacements. ~Product demonstrations are held online and in-person at any time~ - The items that can be cut and their applications vary depending on the length and thickness of the blade. - A little practice and time are needed to get used to the cutting technique. Due to these two points, it can be challenging for first-time users of Slice cutters to select the right product, so we regularly hold product demonstrations to provide explanations and assist with product selection. Feel free to contact us if you are interested!

Company：日海KMO
Price：Less than 10,000 yen

Safety and consumables
Work tools
Work tools

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Slice Metal Handle Utility Knife 10493

A safe Slice cutter that is less likely to cut your hand! It can prevent injuries and workplace accidents, and has approximately 11.2 times the wear resistance compared to metal blades!

【Features of Slice Safety Cutter】 - The patented Finger-Friendly blade design makes it difficult to cut your hand, ensuring safety. *This product does not guarantee that it cannot cut at all. - It has approximately 11.2 times the wear resistance compared to metal blades and does not rust, allowing for long-lasting sharpness. - Some Slice safety cutter products are designed so that the blade does not extend excessively, enabling safe unpacking and opening without damaging the contents. - It supports cost reduction by preventing workplace accidents and injuries, preventing product damage during unpacking, and reducing the frequency of blade replacements. ~Product demonstrations are held online and in-person at any time~ - The items that can be cut and their applications vary depending on the length and thickness of the blade. - A little practice and time are needed to get used to the cutting technique. Due to these two points, it can be challenging for first-time users of Slice cutters to select the right product, so we continuously hold product demonstrations to provide explanations and assist with product selection. Feel free to contact us if you are interested!

Company：日海KMO
Price：Less than 10,000 yen

Work tools
Work tools
Safety and consumables

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Slice Metal Handle Utility Knife 10494

A safe Slice cutter that is less likely to cut your hands! It can prevent injuries and workplace accidents, and has about 11.2 times the wear resistance compared to metal blades!

【Features of Slice Safety Cutter】 - The patented Finger-Friendly blade design makes it difficult to cut your hand, ensuring safety. *This product does not guarantee that it cannot cut at all. - It has approximately 11.2 times the wear resistance compared to metal blades and does not rust, allowing for long-lasting sharpness. - Some Slice safety cutter products are designed so that the blade does not extend excessively, enabling safe unpacking and opening without damaging the contents. - It supports cost reduction by preventing workplace accidents and injuries, preventing product damage during unpacking, and reducing the frequency of blade replacements. ~Product demonstrations are held online and in-person at any time~ - The items that can be cut and their applications vary depending on the length and thickness of the blade. - A little practice and time are needed to get used to the cutting technique. Due to these two points, it can be challenging for first-time users of Slice cutters to select the right product, so we regularly hold product demonstrations to provide explanations and assist with product selection. Feel free to contact us if you are interested!

Company：日海KMO
Price：Less than 10,000 yen

Safety and consumables
Work tools
Work tools

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Slice Craft Cutter Knife 10548

A safe Slice cutter that is less likely to cut your hands! It can prevent injuries and occupational accidents, and has approximately 11.2 times the wear resistance compared to metal blades!

【Features of Slice Safety Cutter】 - The patented Finger-Friendly blade design makes it difficult to cut your hand, ensuring safety. *This product does not guarantee that it cannot cut at all. - It has approximately 11.2 times the wear resistance compared to metal blades and does not rust, allowing for long-lasting sharpness. - Some Slice safety cutter models are designed so that the blade does not extend excessively, enabling safe unpacking and opening without damaging the contents. - It supports cost reduction by preventing workplace accidents and injuries, reducing product damage during unpacking, and decreasing the frequency of blade replacements. ~Product demonstrations are held online and in-person at any time~ - The items that can be cut and their applications vary depending on the length and thickness of the blade. - A little practice and time are needed to get accustomed to the cutting technique. Due to these two points, it can be challenging for first-time users of Slice cutters to select the right product, so we regularly hold product demonstrations to provide explanations and assist with product selection. Please feel free to contact us if you are interested!

Company：日海KMO
Price：Other

Work tools
Work tools
Safety and consumables

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Slice Utility Cutter Knife 10550

A safe Slice cutter that is less likely to cut your hands! It can prevent injuries and workplace accidents, and has approximately 11.2 times the abrasion resistance compared to metal blades!

【Features of Slice Safety Cutter】 - The patented Finger-Friendly blade design minimizes the risk of cuts, ensuring safety. *This product does not guarantee that cuts are impossible. - It has approximately 11.2 times greater wear resistance compared to metal blades and does not rust, maintaining sharpness for an extended period. - Some Slice safety cutter models are designed so that the blade does not extend excessively, allowing for safe unpacking and opening without damaging the contents. - It supports cost reduction by preventing workplace accidents and injuries, reducing product damage during unpacking, and decreasing the frequency of blade replacements. ~Product demonstrations are continuously held online and in-person~ - The items that can be cut and their applications vary depending on the length and thickness of the blade. - A little practice and time are needed to get accustomed to the cutting technique. Due to these two points, it can be challenging for first-time users of Slice cutters to select the right product, so we regularly hold product demonstrations to provide explanations and assist with product selection. Feel free to contact us if you are interested!

Company：日海KMO
Price：Other

Work tools
Work tools
Safety and consumables

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Slice Utility Cutter Knife 10558

A safe Slice cutter that is less likely to cut your hands! It can prevent injuries and workplace accidents, and has approximately 11.2 times the wear resistance compared to metal blades!

【Features of Slice Safety Cutter】 - The patented Finger-Friendly blade design makes it difficult to cut your hand, ensuring safety. *This product does not guarantee that it cannot cut at all. - It has approximately 11.2 times the wear resistance compared to metal blades and does not rust, allowing for a long-lasting sharpness. - Some Slice safety cutter products are designed so that the blade does not extend excessively, enabling safe unpacking and opening without damaging the contents. - It supports cost reduction by preventing workplace accidents and injuries, preventing product damage during unpacking, and reducing the frequency of blade replacements. ~Product demonstrations are held online and in-person at any time~ - The items that can be cut and their applications vary depending on the length and thickness of the blade. - A little time is needed to get accustomed to the cutting technique. Due to these two points, it can be challenging for first-time users of Slice cutters to select the right product, so we continuously hold product demonstrations to provide explanations and assist with product selection. Please feel free to contact us if you are interested!

Company：日海KMO
Price：Other

Work tools
Work tools
Safety and consumables

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Slice Utility Cutter Knife 10564

A safe Slice cutter that is less likely to cut your hands! It can prevent injuries and workplace accidents, and has about 11.2 times the wear resistance compared to metal blades!

【Features of Slice Safety Cutter】 - The patented Finger-Friendly blade design makes it difficult to cut your hand, ensuring safety. *This product does not guarantee that it cannot cut at all. - It has approximately 11.2 times the wear resistance compared to metal blades and does not rust, allowing for long-lasting sharpness. - Some Slice safety cutter models are designed so that the blade does not extend excessively, enabling safe unpacking and opening without damaging the contents. - It supports cost reduction by preventing workplace accidents and injuries, reducing product damage during unpacking, and decreasing the frequency of blade replacements. ~Product demonstrations are held online and in-person at any time~ - The items that can be cut and their applications vary depending on the length and thickness of the blade. - A little practice and time are needed to get used to the cutting technique. Due to these two points, it can be challenging for first-time users of Slice cutters to select the right product, so we continuously hold product demonstrations to provide explanations and assist with product selection. Feel free to contact us if you are interested!

Company：日海KMO
Price：Other

Work tools

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Knife Product List and Ranking from 15 Manufacturers, Suppliers and Companies

Knife Manufacturer, Suppliers and Company Rankings

Knife Product ranking