Last Updated： Aggregation Period:Apr 08, 2026～May 05, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Apr 08, 2026～May 05, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Apr 08, 2026～May 05, 2026
This ranking is based on the number of page views on our site.
31～60 item / All 164 items
Threat!! Full illumination for 30 minutes ⇒ Intensity does not decrease. Introduction of a dedicated device with an integrated heat dissipation unit!!
This is a UV LED irradiator that integrates a heat sink and controller specifically designed for device incorporation, emitting a universal wavelength of 365 nm for ultraviolet processing.
Using a vacuum ultraviolet excimer lamp! Examining how the chemical structure of polyvinyl alcohol changes.
Vacuum ultraviolet (VUV) light, due to its short wavelength and high photon energy, can break molecular bonds through non-thermal processes, leading to advancements in applications such as cleaning, microfabrication, and surface modification. In this document, after spin-coating a PVA aqueous solution onto a gold-coated substrate, a heating treatment was performed to create a film, which was then irradiated with a xenon excimer lamp (172 nm) under a nitrogen or dry air atmosphere. Using an infrared spectrometer and X-ray photoelectron spectroscopy, we observed changes in the chemical state of the PVA film due to VUV irradiation. [Features] ■ Introduction ■ Experiment ■ Results and Discussion *For more details, please refer to the PDF document or feel free to contact us.
Measurement of ultraviolet and visible light transmission spectrum using a spectrophotometer! Introduction to the modification of sol-gel thin films.
The sol-gel method, which is a promising approach to obtain coatings with uniform composition, typically requires heat treatment at several hundred degrees Celsius to remove moisture from the gel film and decompose organic components. This makes it difficult to obtain a strong film on low-temperature-resistant plastics. Therefore, the vacuum ultraviolet (VUV) light-based photon process can be considered applicable for modifying thin films, as it can break atomic bonds solely through the action of photons without accompanying thermal processes from irradiation. This document introduces the changes in state when VUV light is irradiated onto nickel oxide thin films adjusted by the sol-gel method, using an excimer lamp developed as a practical light source. [Contents] ■ Introduction ■ Experiment ■ Results and Discussion *For more details, please refer to the PDF document or feel free to contact us.
Surface modification technology using vacuum ultraviolet (VUV) light! Examination of the differences in modification effects.
Polymers are lightweight and flexible, making them suitable for various applications. Recently, a surface modification technique using vacuum ultraviolet (VUV) light has gained attention. VUV light has a short wavelength and high photon energy, allowing it to break molecular bonds through non-thermal processes. Compared to typical physical surface treatments such as plasma treatment, it is low-cost and causes minimal damage to the surface while enabling surface modification. In this study, we investigated the physical and chemical changes on the surface caused by VUV light irradiation on polymers, as well as the differences in modification effects due to the ambient gas during irradiation. [Contents] ■ Introduction ■ Experiment ■ Results and Discussion *For more details, please refer to the PDF document or feel free to contact us.
Barrier-free design! It can be freely integrated to match your production equipment and machinery.
The "UV Curing Equipment Embedded Type" is an irradiation device developed to fully utilize the capabilities of UV lamps for UV curing systems. It can be freely integrated into your production equipment and devices. The design is barrier-free, and we offer a wide variety of options. 【Features】 ■ Wide variety of options ■ Low-temperature processing ■ Barrier-free design *For more details, please refer to the PDF materials or feel free to contact us.
We offer three types of standard products! A drawer-type tabletop UV curing device.
The "UV Curing Desktop Batch Type" is a drawer-type desktop batch UV curing device. It can be widely used for development, research, and curing experiments, and is a versatile machine that pursues functionality and operability. We offer three types of standard models. 【Features】 ■ Pursuit of functionality and operability ■ Three types of standard models ■ Abundant options *For more details, please refer to the PDF materials or feel free to contact us.
A standalone UV curing device that can use two types of lamps with a wide range of applications!
The "Standalone UV Curing Type" is a self-contained UV curing device suitable for a wide range of applications as a production machine. It is compact and high-spec, allowing for the use of two types of lamps in one unit. Additionally, it offers a wealth of options. We pursued functionality and operability for prototype manufacturing and as a production machine. 【Features】 ■ Compact & High-Spec ■ Abundant Options ■ Capable of using two types of lamps in one unit *For more details, please refer to the PDF materials or feel free to contact us.
From flat objects to three-dimensional items! We accept design and production tailored to your needs.
Introducing the "UV Curing Customized Type." A UV curing device that is effective for a wide range of applications including printing, painting, bonding, molding, and electronic components. We accept design and manufacturing tailored to our customers' needs. Supports everything from flat plates to three-dimensional objects. Please contact us when you need assistance. 【Features】 ■ Variable design ■ Supports flat plates to three-dimensional objects ■ Abundant options *For more details, please refer to the PDF materials or feel free to contact us.
25-year warranty on modules (free of charge)! We propose the best manufacturers and systems for our customers.
At Takeden, we propose the optimal solar power generation systems for our customers from multiple manufacturers, primarily Panasonic, tailored to their lifestyle and installation environment. We recommend the "Creation and Storage Coordination System," which combines solar power generation with lithium-ion storage systems, aiming to realize a clean and comfortable society. 【Features】 - Proposing the optimal manufacturers and systems by pursuing generation efficiency and construction quality - Creating materials on power generation and energy cost reduction effects - Preparing installation drawings for solar cell modules - Arranging construction based on warranty standards For more details, please contact us or download the catalog.
Direct charging from solar panels is also possible! Demand response compatible 20kWh battery.
The "Industrial Lithium-ion Energy Storage System (20kWh Battery)" is a storage system that secures power during disasters while also being utilized for peak power demand suppression during maximum power demand periods, and allows for direct charging from solar panels. It is a medium-sized energy storage system compatible with demand response, capable of a standalone output of 10kVA. 【Features】 ○ Capacity of 20kWh/unit allows for peak shifting with nighttime charging and daytime discharging ○ Equipped with DR function to cut sudden demand ○ Up to 5 units can be linked in one bank, accommodating large facilities ○ Fast charging in 3 hours, ensuring reliability during disasters ○ "Monitoring Service" provides 24/7 support for peace of mind For more details, please contact us or download the catalog.
By strongly reflecting sunlight, it suppresses heat absorption and reduces the surface temperature rise of the corrugated roof!
The "Roof Shade" is a method that covers the upper surface of a metal standing seam roof with a special mesh sheet that excels in weather resistance, durability, and static electricity prevention, thereby suppressing rapid increases in indoor temperature during the summer. By securing the screen on top of the ridge, it ensures ventilation from the cross-section, and walking on the shade gripper fixed areas is possible even after installation. 【Features】 ■ Ensures ventilation from the cross-section ■ Walking on the shade gripper fixed areas is possible after installation ■ No power supply required ■ Minimal noise during installation ■ Few components *For more details, please refer to the PDF document or feel free to contact us.
Cuddling up, UV. We provide a new level of environmental hygiene with ultraviolet rays that can be emitted even in populated environments.
"UVee" is a virus suppression and disinfection UV irradiator that incorporates the "Care222 light source module," which uses 222nm ultraviolet disinfection technology suitable for use in occupied environments. Being a built-in device, it fits seamlessly into spaces and can be adjusted to a swivel angle of 45° and a horizontal rotation angle of 340°, allowing targeted irradiation of disinfection areas. It is equipped with a safety feature that forces the light to turn off when someone approaches the light source, thanks to a proximity sensor. 【Features】 ■ Can be used in occupied environments ■ Capable of disinfecting spaces and surfaces ■ Fits and targets specific areas for disinfection ■ Equipped with a safety feature using sensors ■ Can also be activated in unoccupied environments using a human presence sensor *For more details, please refer to the PDF document or feel free to contact us.
Significant reduction in running costs is possible! Irradiation with uniformity below 3% can also be achieved.
The "MS Series for Surface Irradiation" is a light source that can irradiate a uniform high-intensity light over any area or shape. Thanks to its unique optical design, it can achieve an irradiation uniformity of less than 3%. We provide light sources tailored to your needs, including irradiation area, wavelength, ultraviolet intensity, and uniformity within the area. Additionally, the LED lineup includes wavelengths of 265, 280, 365, 385, and 405 nm, and it is also possible to create light sources that mix multiple wavelengths. [Features] - Unique optical design - Customized light sources to meet your requirements - Ability to create light sources that mix multiple wavelengths - Significant reduction in running costs *For more details, please refer to the PDF document or feel free to contact us.
Curing lacquer with ultraviolet light! High productivity and cost reduction possible!
This is a groundbreaking paint that overcomes issues such as work efficiency, difficulty in handling, and weather resistance, which have been problems in using traditional lacquer for industrial applications. Lacquer coating is now possible not only on wood but also on materials different from traditional lacquerware, such as metal, plastic, and glass. 【Features】 ■ The coating film is hard and durable ■ Compatible with various materials ■ Reduced degradation from ultraviolet rays ■ Heat-resistant and flame-retardant *For more details, please contact us or download the catalog.
HID lamp high color rendering lighting achieves high efficiency and long lifespan by using quartz to ceramic for the light-emitting tube at high temperatures and ensuring the evaporation of metal halides!
The applications of HID lamps are as follows: ■ CDM-T (Single-ended G12 type) - Accent lighting and display lighting spotlights for commercial facilities - Downlights for base lighting in commercial and public facilities - Indirect lighting upper lights and wall wash - Floodlights and pole lights for outdoor lighting - Base lights for high ceilings ■ CDM-TD (Double-ended type) - Upgrade of conventional metal halide lamps - Downlights for base lighting in commercial and public facilities - Indirect lighting upper lights and wall wash - Floodlights and pole lights for outdoor lighting ■ CDM-TP (Triple tube E26 type) - Upgrade of conventional metal halide lamps - Floodlights and pole lights for outdoor lighting - Base lights for high ceilings ■ CDM-R (With mirror) - Accent lighting and display lighting spotlights for commercial facilities - Downlights for base lighting in commercial and public facilities - Indirect lighting upper lights and wall wash - Floodlights and pole lights for outdoor lighting *For more details, please contact us or refer to the catalog!
By achieving overwhelming high brightness and groundbreaking long-distance irradiation, excellent curing properties and high productivity are made possible.
The "e-cure F Series" is a UV-LED curing device that creates new value by achieving overwhelming high brightness and groundbreaking long-distance irradiation, enabling excellent curing properties and high productivity. By incorporating a new type of UV-LED, it has achieved industry-leading peak illuminance of 25W/㎠ (high power) and 15W/㎠ (standard). 【Features】 ■ Speedy ■ Reduced thermal damage ■ Space-saving without ducts ■ Excellent energy efficiency ■ Long lifespan *For more details, please refer to the catalog or feel free to contact us.
It is possible to see any color faithfully! Since the basic shape is the same as that of fluorescent lights, there is no need to replace the lighting fixtures!
The "iLED Bell Line" has color rendering properties close to sunlight, allowing for extremely faithful color representation, and is a product compliant with the recommendations of the Japan Printing Society. While maintaining the performance of the conventional iBell Line, it also achieves a balanced color reproduction for red light, which fluorescent lamps struggled with, and further realizes a color temperature close to sunlight. We offer a variety of products, including the "iLED Reflective Manuscript Color Viewer" and "iLED Proof Light," which are ideal for quality control in color printing. *For more details, please refer to the catalog or feel free to contact us.
UV irradiation is possible under a nitrogen atmosphere that eliminates oxygen, which is an inhibiting factor for UV curing! A nitrogen purge conveyor that allows for easy adjustment of oxygen concentration.
The "Nitrogen Purge Conveyor UV Irradiation Device" is a device equipped with a nitrogen purge transport mechanism for curing UV-curable inks and resins under a nitrogen atmosphere. It enables UV irradiation in a nitrogen atmosphere that eliminates oxygen, which is a factor that inhibits UV curing. 【Features】 ■ Lamp output can be switched between three levels ■ Oxygen concentration can be easily adjusted ■ Unique design of the nitrogen purge box reduces nitrogen usage ■ Additional installation of oxygen concentration meters and leak detectors, as well as various filters, is possible ■ It has the same specifications as production machines, allowing for horizontal deployment *For more details, please refer to the catalog or feel free to contact us.
[Presentation of Know-How Materials] Introduction to the principles and mechanisms of UV cleaning and modification that reduce drying processes without the use of liquids such as water or solvents.
The cleaning and modification device using short-wavelength ultraviolet light achieves high-quality and high-speed processing through high-output irradiation technology with ultraviolet lamps and irradiation devices. Our company is constantly working on the possibilities of various UV devices in the cutting-edge application fields of light. ◆ You can view materials introducing the principles and mechanisms of UV cleaning and modification, as well as basic knowledge of UV, from the download section. 【Features】 - No use of liquids such as water or solvents, eliminating the need for a drying process - No need for equipment such as vacuum chambers, resulting in low costs - Non-contact with the workpiece, preventing damage *Please download the PDF to view the materials.
【Irradiation Test / Demo Unit Available for Loan】 For curing UV coatings! A new water-cooled deep ultraviolet 280nm UV-LED has arrived!
This is a UV-LED irradiator corresponding to a wavelength of deep ultraviolet 280nm. It can accommodate various transport systems such as stage transport and belt transport. Irradiation tests in our laboratory and rental of demonstration units are available. 【Features】 ■Irradiation wavelength: Deep ultraviolet 280nm ■Peak illuminance: 100mW/㎠ (design value) ■Applications: Curing of UV adhesives, curing of UV inks, curing of UV coatings, removal of tack, etc. ■Compatible with line irradiation / surface irradiation types *For more details, please download the catalog or feel free to contact us.
Achieving a high radiation intensity of 18,000 mW/㎠! A variety of irradiation options to meet diverse needs!
The "Spot-Type UV-LED Curing Device" focuses high-output ultraviolet light to instantly cure small workpieces. We have newly added a deep ultraviolet wavelength of 280nm, preparing a wide range of wavelength options. *Available options include 280nm, 365nm, 385nm, and 405nm. 【Features】 ■ Achieves a high radiant intensity of 18,000mW/㎠ By adopting high-power LEDs and a unique optical design, high power is realized. ■ Low power consumption of 25W and a long lifespan of 20,000 hours Significantly reduces running costs compared to lamp-type devices. ■ Suitable heads can be selected according to the set environment "Standard Head" with excellent heat dissipation design, providing stable performance. "Compact Head" with a lightweight and compact design, allowing for space-saving installation. ■ Suitable irradiation forms can be selected according to adhesion conditions "Spot Lens" achieving optimal irradiation with six spot sizes. "Line Lens" achieving optimal irradiation with three line sizes. *For more details, please refer to the PDF or feel free to contact us.
A UV lamp that does not contain mercury and does not generate ozone, designed to reduce environmental impact! It features wavelengths of 330 to 360 nm, which are not available in UV-LEDs!
The electrode-less, mercury-free metal halide lamp is a new UV lamp designed with consideration for the environment, as it does not contain mercury. This document includes various information such as the features of the electrode-less, mercury-free metal halide lamp and an overview of the irradiation unit equipped with this lamp. 【Features】 ■ Does not use mercury at all ■ No ozone generation ■ Has characteristics not found in UV-LEDs ■ Unique emission in the wavelength range of 330 to 360 nm *You can view the contents of the document by downloading the PDF! If you have any questions, please feel free to contact us.
We propose the optimal infrared "light" solution for your production process!
IR (infrared) irradiation achieves heating with minimal environmental impact, as it does not produce direct CO2 emissions compared to other heating methods. It has low energy loss, utilizing approximately 85% of the input power, making it a "high-efficiency heat source." Its non-contact heating feature ensures "clean and safe" operation, contributing to improved efficiency, safety, and cost-effectiveness in work processes. Features: ◆ Thermal control: Adoption of an optically designed heater unit and power supply system ◆ High efficiency: Low energy loss, utilizing approximately 85% of the input power ◆ Rapid temperature rise: Easy thermal control and energy-saving ◆ Compact and lightweight: Space-saving and easy integration into existing lines due to unit structure ◆ Clean heating: Non-contact heating with no gas emissions, allowing for heating in various environments ◆ Long lifespan: Consistent light emission until the end of life due to the operation of the halogen cycle For more details, please feel free to contact us.
Up to four mixed wavelengths, such as 280nm and 365nm, are possible! The touch panel makes it easy to operate and extremely user-friendly!
This is a UV-LED irradiation device suitable for material development and production. It has a rich lineup of wavelengths, capable of accommodating not only single wavelengths but also up to four mixed wavelengths in the LED irradiator. There are two types of irradiation methods: stage return type (L-cure Pro) and conveyor type (L-cure). ■Features L-cure Pro (Stage Return Type) - Recipe registration (various automatic settings) is possible Reduces work time without the need for recording or setting - Irradiation conditions can be extracted as CSV files - Irradiation modes: fixed irradiation, scan irradiation L-cure (Conveyor Type) - Compact design for space-saving - Easy operation with a touch panel - Capable of accommodating two irradiators *Irradiation tests can be conducted in the lab. *Please feel free to contact us for more details.
The projector part is very compact and easy to handle! It has a dimming function that allows for projection under various conditions!
This is a UV-LED irradiator with a very compact and easy-to-handle size. Features: - Wavelength lineup (275/315/365nm) - Dimming function allows irradiation under various conditions - 4CH specification enables irradiation from multiple directions (365nm only) - External control available (RS-232C) (365nm only) *For more details, please feel free to contact us.
Create a clean environment through disinfection and sanitization in facilities and places where ozone water cannot be used!
The "Ozofresh Series" is a deodorizing and disinfecting cleaning machine that does not require ozone water and can be used in facilities and places where it cannot be used. In dry kitchens and dining areas, where washing with water is not possible, it can easily deodorize and disinfect without wetting the floors or walls by blowing out ozone air. Additionally, it provides added benefits to places that have already introduced functional waters such as ozone water and electrolyzed water. 【Features】 ■ Easy deodorization and disinfection in places where water cannot be used ■ Capable of disinfecting airborne bacteria and deodorizing entire rooms *For more details, please refer to the catalog or feel free to contact us.
It is possible to irradiate an electron beam toward external objects outside the irradiation port!
This document contains the application patent for the "Underwater Electron Beam Irradiation Device," handled by Senryou, which is engaged in the sale of patents related to renewable energy. The "Underwater Electron Beam Irradiation Device" can irradiate an object placed underwater with an electron beam that passes through hydrogen gas released towards the object. We provide an overview of the invention, as well as means to solve the problems and the effects of the invention. [Contents (excerpt)] ■ Patent Application ■ Specification ■ Claims ■ Abstract ■ Drawings *For more details, please refer to the PDF document or feel free to contact us.
Reduction of unnecessary heat generation and unwanted wavelength light energy! A device that contributes to improving the working environment.
The "BLUE WAVE SYSTEM" is an ultra-low power ultraviolet irradiation device that has achieved overwhelming energy savings as a result of innovative designs in the types of metals used to emit light and their states of existence. In this device, the temperature at the light irradiation surface is around 30 degrees, which is quite low, allowing the lamp to be positioned closer to the printing surface, significantly reducing power consumption compared to conventional lamps. It has been demonstrated that drying can be achieved at 3 kW even at high-speed winding (250 m/min). With minimal unnecessary heat generation and energy from unwanted wavelengths, it contributes to improving the working environment and reducing carbon dioxide emissions. 【Features】 - Low temperature at the light irradiation surface, allowing the lamp to be positioned closer to the printing surface - Power reduced from 8 kW to 2.2 kW compared to conventional lamps - Minimal unnecessary heat generation and light energy from unwanted wavelengths - Contributes to improving the working environment and reducing carbon dioxide emissions - Eligible for energy-saving subsidies *For more details, please refer to the PDF document or feel free to contact us.
3-year warranty included! Since it is not battery-operated, stable UV irradiation is possible.
The "KTZ Series" is a dedicated LED irradiator for UV putty and LED putty with a wide irradiation range. Starting with the "KTZ-1830," which can also accommodate various UV putties and LED putties as well as UV primers due to its three types of irradiation wavelengths, we also offer a lineup including the "KTZ-3969" and "KTZ-CANDY," which achieve complete curing of door panels in one go. Additionally, we provide "LED fluorescent lights for painting booths," which have been implemented in over 300 locations nationwide. 【Features】 ■ Instantly operational with no setup time required after switching on ■ Wide irradiation range ■ Emits three types of wavelengths ■ Broad compatibility with putties and primers, offering high versatility ■ Emits light from LED elements, making it difficult for the putty or metal surface to heat up *For more details, please refer to the PDF document or feel free to contact us.
Because we are a manufacturer developing light-curing resins, we understand! The performance of the irradiation equipment is determined by the "type of wavelength," "light intensity," and "uniformity"!
"High output" even if small! Therefore, it can cover a large area!! Efficiency-focused dual-wavelength switching type!! ● Equipped with two types of LEDs: visible light and UV-A ● Power supply can be provided by battery or AC100V ● The battery is equipped with a remaining charge indicator and LED driver ● Compatible with UV curing resins and visible light curing resins such as UV putty and UV surfacer available on the market The illuminance of the light emitted from the LED is the same whether using AC100V or battery (performance is the same).
