Last Updated： Aggregation Period:Jul 16, 2025～Aug 12, 2025
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Jul 16, 2025～Aug 12, 2025
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Jul 16, 2025～Aug 12, 2025
This ranking is based on the number of page views on our site.
46～60 item / All 379 items
Two-stage combustion with strong and weak modes significantly reduces kerosene consumption in weak combustion mode.
Equipped with a rotary gasification burner, it operates quietly at 58 dB or below. Weighing only 11.5 kg, it is easy to transport (when the tank is empty) and features a clearly visible warning lamp that makes it difficult for kerosene to spill during transport or if it tips over.
Significant reduction in the generation of formaldehyde and nitrogen oxides (NOx).
We have achieved efficient low fuel consumption by reducing fuel consumption during weak combustion. The position of the operation panel has been raised, improving visibility and ease of use. The individual alarm monitor allows for immediate identification of the cause of safety device activation. It features a large-capacity tank that enables over 10 hours of combustion.
Environmentally conscious with the newly developed OE combustion system.
The warm air jet heater is different from the infrared type; it is a heater that uses a fan to distribute the heat from the burner. Due to its convection method, it is particularly effective for drying purposes. There is also an energy-saving type that reduces kerosene consumption.
With a thermal output of 20kW, it feels equivalent to 24kW of warmth, featuring a vertical heat panel and an eco-timer operation function for efficient and energy-saving performance.
■Warmth one class above, with a heat output of 20kW and a perceived heat of 24kW ■Efficient heating with vertical panels and a circulator ■Two-stage flame power adjustment ■Eco timer function that switches to low after 30 minutes ■Adjustable angle of the heat radiation panel ■Compact design, installation space of 50cm x 61cm ■Easy to move with casters ■Heat output: High 19.4kW / Low 15.1kW (two-stage combustion) ■Heating capacity: Wooden structure 25 tsubo / Concrete 35 tsubo ■Operating noise (50/60Hz): 64/64dB ■Tank capacity: 22L
Band heater that provides high thermal conductivity heating effect.
The "band heater" is a lightweight, thin cylindrical or semi-cylindrical heater that insulates electric heating wires such as nichrome wire through heat-resistant mica and is covered with a heat-resistant metal plate (such as stainless steel or aluminum) on the outer surface. It can be processed to have a flat contact surface, allowing it to be attached to cylindrical workpieces, resulting in a high thermal conductivity heating effect. 【Features】 ■ Lightweight, thin cylindrical or semi-cylindrical heater ■ Contact surface can be processed to be flat ■ Can be attached to cylindrical workpieces ■ High thermal conductivity ■ Heating effect *For more details, please refer to the catalog or feel free to contact us.
The mica heater is a heater that sandwiches electric heating wires, such as nichrome wire, between heat-resistant mica.
* The shape is not covered by an outer metal plate like band heaters or space heaters, allowing for rapid temperature rise! * No need for metal plates, resulting in cost reduction! * Can be processed into various shapes such as rectangular, square, circular, with mounting holes, etc.! * Available in various sizes! Expanding applications.
For preventing condensation and humidity inside the board! A space heater with an easy-to-install cover.
The "Space Heater with Cover" is a space heater equipped with a heat dissipation cover, designed for use in preventing condensation and moisture inside panels. It consists of a heat dissipation cover made of punched steel plate with the space heater integrated, allowing for easy installation with two or four screws. It is designed and manufactured to be extremely safe, ensuring that there is no risk of direct contact with the heat source. 【Features】 ■ Integrated space heater within the heat dissipation cover ■ Easy installation ■ Safe design that prevents direct contact with the heat source *For more details, please refer to the PDF materials or feel free to contact us.
For preventing condensation and reducing humidity inside the tray!
It can be used as a heater to prevent condensation and reduce humidity inside the panel. A terminal block is incorporated into the wire connection part, making the work easier. 【Features】 ■ Heater for preventing condensation and reducing humidity inside the panel ■ Terminal block incorporated into the wire connection part ■ Easy to work with ■ Terminal block: Rated 600V/25A, made of polycarbonate *For more details, please refer to the PDF document or feel free to contact us.
Gas supply, equipment exhaust, pump exhaust, heating solutions for pollution control device piping!
The "Flexible Jacket Heater" is a heating system for supply gas that prevents the adhesion of by-products, optimized as an item for semiconductor piping. The flexible heating element with a multi-layer insulation structure and grounding is highly safe and durable, and it controls and monitors temperature through a dedicated temperature control and monitoring system. Additionally, it reduces downtime and lowers cleaning costs for piping. It is used in exhaust piping, gas supply piping, valves, equipment, and exhaust treatment device piping. 【Features】 ■ Easy to attach and detach ■ Durable and long-lasting ■ Minimum diameter of φ6.3mm ■ Flexible and fits complex shapes ■ Cleanroom Class 10 *For more details, please refer to the PDF document or feel free to contact us.
High watt cartridge heater enables rapid heating due to its high watt density, allowing for high-cycle molding.
Due to new materials such as engineering plastics and thixotropic materials, increasingly high temperature management is required for mold temperatures. If it's high wattage, it is indeed the Watlow Corporation from around the world. Watlow's cartridge heaters are distributed globally with unique model numbers.
We provide standardized band heaters. The average watt density is 5 w/cm². We also accommodate custom orders outside of standard products.
Side pull type Vertical pull type Rivet type High adhesion type
Ideal as a gate bushing heater that is resistant to high temperatures and also strong against resin coating.
Compared to band heaters, it has a longer lifespan at high temperatures and excellent insulation properties. Since it makes surface contact with the heated object, the thermal efficiency is significantly improved. There are four types of sheath cross-sections: 4.1 square, 3.5 square, 2.5x4.0 rectangular, and 2x3 rectangular. The connection part with the lead wire is a non-heating section, making it less likely to experience disconnection. It is also possible to incorporate a thermocouple (J or K).
High thermal conductivity, ideal for heating the manifold.
- It is a flexible heater that can be easily bent with hand strength. - It has a higher thermal efficiency compared to cartridge heaters and offers excellent temperature distribution in the manifold. - No inorganic hardener is required for fixing the heater. - It is a product with lower power consumption compared to other materials.
Bendable heater
- With excellent flexibility, it can be bent into free shapes and can be installed in narrow spaces or complex shapes. - We will manufacture it to your desired length (depending on the desired sheath length, number of bolts, wattage, and quantity). - When requesting a quote, please specify the sheath diameter, sheath length, number of bolts, wattage, quantity, lead wire length, and operating temperature in advance.
TEMPCO's band heaters use a special insulator (mica), making them excellent products for high-temperature resistance.
1. This is a high-watt density band heater of the NHW (stainless steel insulated lead wire type) and NHL (fiberglass insulated lead wire type). MAX temperature: 450°C, recommended watt density: 8.5W/cm² or less. 2. We maintain a wide range of standard products with a minimum inner diameter of 22mm to a maximum inner diameter of 70mm as manufacturer standard stock. 3. The tightening band screw part has a compact design, allowing for a smaller mold engraving size. 4. Custom sizes can also be manufactured, so please contact us.
