Hardware Product List and Ranking from 189 Manufacturers, Suppliers and Companies

Last Updated： Aggregation Period:Nov 19, 2025～Dec 16, 2025
This ranking is based on the number of page views on our site.

Hardware Manufacturer, Suppliers and Company Rankings

Last Updated： Aggregation Period:Nov 19, 2025～Dec 16, 2025
This ranking is based on the number of page views on our site.

  1. null/null
  2. アシスト Osaka//Building materials, supplies and fixtures manufacturers
  3. Three-Nine Shimno Co., Ltd. Osaka//Building materials, supplies and fixtures manufacturers
  4. 4 タツミ Niigata//Building materials, supplies and fixtures manufacturers
  5. 5 能重製作所 Saitama//Building materials, supplies and fixtures manufacturers
Go to Company Ranking

Hardware Product ranking

Last Updated： Aggregation Period:Nov 19, 2025～Dec 16, 2025
This ranking is based on the number of page views on our site.

  1. Housing-related Hardware Catalog Vol. 31
  2. Comprehensive Catalog: Interior Hardware (Digest Version) アシスト
  3. Substrate material R processing (curved walls, R walls, arched walls, R ceiling substrate, dome ceiling) 能重製作所
  4. 4 Architectural Design Tools
  5. 5 Joining hardware "Tech One P3" タツミ

Hardware Product List

436～450 item / All 616 items

Displayed results
1.5 times bracing connector (Libero)

1.5 times bracing connector (Libero)

Can be installed without distinction on the top, bottom, left, or right of the brace ends! Brace connection hardware for a wall multiplier of 1.5 times.

The "1.5x Bracing (Libero)" is a bracing connection hardware designed for wall strength of 1.5 times, which can reduce interference with floor plywood and hold-down hardware. Since screws that attach to the foundation are not required, installation is possible even if floor plywood is placed between the foundation and the hardware. Additionally, by fixing the bracing at a position away from the edge of the horizontal member, interference with other hardware at the joint ends can be minimized. 【Features】 ■ No screws required for attachment to the foundation ■ Installation possible even with floor plywood between the foundation and hardware ■ Can be installed without distinction in the upper, lower, left, or right ends of the bracing ■ Reduces interference with other hardware at the joint ends ■ Quality performance testing completed by a certified building material testing center *For more details, please refer to the PDF document or feel free to contact us.

  • Joints between components

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Double brace connector 'Double Brace (Try)'

Double brace connector 'Double Brace (Try)'

Can be installed in any direction: lightweight and compact brace connection hardware.

The "Double Brace (Try)" is used when joining 45mm x 90mm braces (with a wall multiplier of 2) to columns and horizontal members. It is lightweight and compact, and the standard dimensions of the hardware are symmetrical, allowing for installation in any orientation—up, down, left, or right. Additionally, in the case of a true wall, the "folded" part is cut out by 40mm, ensuring that the hardware does not become exposed. 【Features】 ■ Lightweight and compact ■ Symmetrical standard dimensions of the hardware ■ Installable in any orientation—up, down, left, or right ■ In the case of a true wall, the "folded" part is cut out by 40mm, preventing hardware exposure ■ Equivalent certified product to Z-mark hardware (BP-2) *For more details, please refer to the PDF materials or feel free to contact us.

  • Joints between components

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Double Bracing Connector 'Double Bracing (Multi)'

Double Bracing Connector 'Double Bracing (Multi)'

No screws needed to fasten to the horizontal framing! A brace joint hardware that can be installed even with floor plywood in place.

The "Double Brace (Multi)" does not require notching of columns or horizontal members, allowing for the connection of 45mm x 90mm braces (wall strength ratio of 2). Since screws for fastening to horizontal members are not needed, installation is possible even with floor plywood (thickness of 28mm or less). Additionally, the width of the hardware is 45mm, making it more accommodating for internal use. 【Features】 ■ No need to notch columns or horizontal members ■ No screws required for fastening to horizontal members ■ Installation is possible even with floor plywood ■ Better fit for internal use ■ Equivalent to Z-mark hardware (BP-2) *For more details, please refer to the PDF document or feel free to contact us.

  • Joints between components

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Diagonal brace connection hardware 'Hexa Plate SD'

Diagonal brace connection hardware 'Hexa Plate SD'

The embossed processing prevents the screw heads from being visible! It is possible to directly attach materials like load-bearing panels over the hardware.

The "Hexa Plate SD" is designed to be installed on the side of horizontal members, reducing interference with hold-down hardware and similar components. With a thickness of 0.6mm (compared to the conventional brace plates which are 2.3mm), it does not require notching, allowing for direct attachment of structural sheathing and similar materials over the hardware. This product is used when joining the ends of braces that are 30mm×90mm or larger (wall strength ratio of 1.5 times), 45mm×90mm or larger (wall strength ratio of 2 times), and 90mm×90mm or larger (wall strength ratio of 3 times). 【Features】 ■ Reduces interference with hold-down hardware and similar components ■ No notching required due to the thin thickness of 0.6mm ■ Allows for direct attachment of structural sheathing and similar materials over the hardware ■ Embossed design prevents screw heads from being exposed ■ Performance certified by the Japan Housing and Wood Technology Center *For more details, please refer to the PDF document or feel free to contact us.

  • Joints between components

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Brace connection hardware 'B-Eaglet Double'

Brace connection hardware 'B-Eaglet Double'

Internal use compatible! Hardware shape that avoids interference with vertical bolts for hold-downs.

The "B Eaglet 2x" is a hardware shape that avoids interference with vertical bolts for hold-downs, whether used externally or internally. In the joist method, it can be installed even in places where bracing comes at the edge of the joist. This product is used when joining the ends of bracing (wall strength ratio of 2x) that are 45mm x 90mm or larger. 【Features】 ■ Hardware shape that avoids interference with vertical bolts for hold-downs ■ Reduces interference with hold-down hardware, etc., when used internally ■ Does not interfere with beam support hardware even at the junction with bracing ■ Can be installed even in places where bracing comes at the edge of the joist ■ Certified equivalent to Z-mark hardware (BP-2) *For more details, please refer to the PDF materials or feel free to contact us.

  • Joints between components

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Double Bracing for Hardware Construction Method - Floor Plywood Version

Double Bracing for Hardware Construction Method - Floor Plywood Version

Used for floor plywood with a thickness of 30mm or less! It is a brace compatible with floor plywood for interior use.

The "Double Brace for Metal Construction Method, Floor Plywood Specification" is suitable for fixing braces on top of floor plywood (30mm thick or less). It is used when joining the ends of braces that are 45mm x 90mm or larger (with a wall multiplier of 2). The main metal body is attached to the floor plywood using four dedicated square bit screws TB-76 on the horizontal member side and four dedicated square bit screws TBA-45 on the column side. 【Features】 ■ Floor plywood specification ■ Usable for traditional construction methods ■ Surface treatment: Hot-dip galvanized steel plate (Z27) ■ Standard shear resistance per meter for brace walls: 3.78kN ■ Material: JIS G 3302 (hot-dip galvanized steel plate and steel strip) SGHC or SGCC *For more details, please refer to the PDF document or feel free to contact us.

  • Support hardware/opening hardware

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Column connection hardware "Flat Plate SD"

Column connection hardware "Flat Plate SD"

High corrosion resistance and high tensile strength with a thickness of 0.6mm! It has strength equal to or greater than Yamagata Plate VP.

The "Flat Plate SD" has a thickness of 0.6mm (compared to the conventional corner hardware which has a thickness of 2.3mm), allowing structural plywood and similar materials to be directly attached over the hardware. The screw-in area has an embossed finish, so the screw heads do not protrude. It uses "Super Dima R," which has excellent corrosion resistance. It has a load capacity equal to or greater than that of the Z-shaped plate VP. 【Features】 ■ N value of 1.1 or less ■ High corrosion resistance and high tensile strength at 0.6mm thickness ■ Short-term allowable tensile strength of 5.9kN ■ Performance certified by the Japan Home and Wood Technology Center *For more details, please refer to the PDF document or feel free to contact us.

  • Support hardware/opening hardware

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Column connection hardware "Flat Plate Slim Plywood Specification"

Column connection hardware "Flat Plate Slim Plywood Specification"

Introducing column connection hardware for plywood specifications for structural plywood with a thickness of 12mm or less!

The "Flat Plate Slim Plywood Specification" is used for the connection of columns and horizontal members. It can be installed over structural plywood with a thickness of 12mm or less. Please secure 2 dedicated corner bit screws TB-55 on the column side and 3 on the horizontal member side. This product has passed joint performance tests conducted by House Plus Inspection Co., Ltd. 【Features】 ■ Plywood specification ■ N value of 1.0 or less ■ High corrosion resistance and high tensile strength, 0.6mm thickness ■ Short-term standard joint load capacity of 5.7kN ■ Material: NSDC570, manufactured by Nippon Steel Corporation ■ Surface treatment: Alloy-coated steel sheet "Super Dyma," ZQNK18 chrome-free *For more details, please refer to the PDF document or feel free to contact us.

  • Support hardware/opening hardware

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Rolling door hardware

Rolling door hardware

Custom sizes available to fit within the dimensions! You can make effective use of the space.

This product is a rolling door hardware that features a small door track, allowing for light and easy opening and closing. The opening and closing space of the door is less than one-third that of a conventional single-leaf door, enabling effective use of space. Additionally, the flat floor allows for easy entry and exit for wheelchair users. 【Dimension Compatibility Range】 ■ Frame Width: 600–1000mm ■ Frame Height: 1700–2100mm ■ Effective Opening Width: 495–895mm ■ Effective Opening Height: 1660–2060mm ■ Door Thickness: 33–36mm *For more details, please download the PDF or feel free to contact us. *The downloaded material will be the instruction manual.

  • Hardware Doors, Handles and Locks

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Outdoor Construction Materials Catalog

Outdoor Construction Materials Catalog

A rich lineup of B-pillar spacing retaining hardware, scaffolding bolts, underground cable passing materials, and more.

This catalog provides a comprehensive introduction to the "Outdoor Construction Materials" handled by Koubun Co., Ltd. It includes various products such as the "Flexible Band (4BD・FB4)" which can be used for the installation of support wires, support wire anchors, and hanging hardware, as well as "M Seats・ABM" and "Hanging Wire Cross Hardware" for the installation of arms and boxes. Please use this for selecting products. 【Featured Products (Partial)】 ■ Stainless Band Setter・SFT ■ Plastic Band・Fastening Hardware / Plastic Band Set ■ Band Support Hardware・TYS ■ Low-Pressure Rack・RL-O ■ Flexible Arm Band・UAB, etc. *For more details, please refer to the PDF document or feel free to contact us.

  • Safety and consumables

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Provides continuous large openings and spacious areas: framed wooden structure with surrounding columns.

Provides continuous large openings and spacious areas: framed wooden structure with surrounding columns.

Advantages as an "alternative structure to steel frame construction"! Usable as a structural body for versatile architecture.

The "Enclosure Column Frame Structure" is a type of wooden frame structure made from "structural timber" and "specialized hardware." It consists of four general-purpose cedar lumber pieces secured with specialized hardware to form a robust "enclosure column" and rigid beams, creating a wooden frame that does not rely on shear walls. Continuous large openings and spacious areas enrich human activities. 【Features】 ■ Kind to people (sensory effects) → Aroma, warmth, texture ■ Insulating effect of wood itself → About 20 times more effective than steel frames ■ Excellent workability ■ Superior processability ■ Reduction in insulation construction costs / Lower material costs and foundation construction costs *For more details, please refer to the related links or feel free to contact us.

  • Insulation work
  • Special Construction Method
  • Special wooden structures

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Assembly and construction process of the enclosing columns and enclosing column structure.

Assembly and construction process of the enclosing columns and enclosing column structure.

Investing in technology unique to a metal workshop! Making iron more "flexible" and wood more "durable."

We will introduce the assembly and construction process of the "Enclosure Column Frame Wooden Structure" that we handle. The enclosure column is completed by pressing a φ16 pin into the column-beam joint of the hydraulic insertion machine. The construction process involves suspending the enclosure column, then joining it at the joint section with a bracket, similar to the appearance of a steel column, and wrapping it with an L-shaped splice sheet, securing it with screws. 【Assembly Process of the Enclosure Column】 1. Four 120mm square column materials 2. Assembled with dedicated hardware 3. Bolts are tightened 4. Completed *For more details, please refer to the related links or feel free to contact us.

  • Special Construction Method

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Encircled Column Ramen Wooden Structure / Line Industry <What Can Be Done Now from Research and Development Achievements>

Encircled Column Ramen Wooden Structure / Line Industry <What Can Be Done Now from Research and Development Achievements>

Oushu Akamatsu, with a moisture content SD of hinoki from Gifu Prefecture below 20%! Young's modulus E is over 110.

We would like to introduce the results of research and development related to the "Encased Column Frame Wooden Structure" that we handle. The moisture content SD of the Oushu Red Pine and the Hinoki from Gifu Prefecture in the frame type is below 20%, and the Young's modulus E is above 110. It is possible to arrange them in "lines" and "planes." 【2-Way Frame】 ■ Size of 6.0m in width and height of 3.0m with moisture content SD below 20% and Young's modulus E above 110 ■ Arranged in "lines" ■ Arranged in "planes" ■ Arranged "freely" *For more details, please refer to the related links or feel free to contact us.

  • Special Construction Method
  • Special wooden structures

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
【Examples of Introducing Column-Frame Wooden Structures】 Model and Office

【Examples of Introducing Column-Frame Wooden Structures】 Model and Office

We have created high added value that allows for buildings like steel structures using general-purpose timber!

We would like to introduce an example of the "enclosed column frame wooden structure" adopted on the second floor of the LINEindustry Prefectural Timber Utilization New Office. This structure effectively utilizes local timber (cypress and cedar) in a natural and stress-free manner, and since it does not require shear walls, it allows for three sides to be covered in glass. Additionally, as it consists of a collection of four 120mm square timber pieces, the line of sight passes through the middle of the columns, enabling the construction of robust columns without a bulky appearance. 【Case Overview】 ■ Main Structure - 2nd Floor: Wooden (enclosed column frame wooden structure) - 1st Floor: Reinforced concrete ■ Fire resistance and other requirements: Other buildings ■ Total floor area: 245.26m² ■ Main tree species used: Cypress and cedar *For more details, please refer to the PDF document or feel free to contact us.

  • Special Construction Method

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Case Study of Introducing Wooden Structure with Enclosed Columns: Clinic

Case Study of Introducing Wooden Structure with Enclosed Columns: Clinic

Kind to people, warmth, mental stability, refreshing effect! Effective in rehabilitation treatment, even in space.

We would like to introduce a case study of the "encased column frame wooden structure" used at Hashima Orthopedic and Dermatology Clinic. Wood is gentle on people, providing warmth, healing, mental stability, and refreshing effects. This structure was adopted with the intention of achieving these benefits in rehabilitation treatment through the space. Initially, the plan was for a steel structure with only the interior designed in wood, but the encased column frame structure allows for a large open space that matches the rehabilitation room and results in a sustainable building. 【Case Overview】 ■ Main Structure - 2nd Floor: Steel Structure - 1st Floor: Steel Structure + Wooden Structure (Encased Column Frame Wooden Structure) ■ Fire Resistance Requirements: Fireproof Structure ■ Total Floor Area: 499.63 m² ■ Main Wood Species Used: Hinoki (Japanese Cypress) and Sugi (Japanese Cedar) *For more details, please refer to the PDF document or feel free to contact us.

  • Special Construction Method

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Search Keywords Related to Hardware

COPYRIGHT © 2001-2025 IPROS CORPORATION ALL RIGHTS RESERVED.