16～30 件を表示 ／ 全 74 件
New JIS compliant durometer (conforming to JIS K 6253).
It is a hardness tester that quantifies and represents the degree of hardness of soft materials such as rubber, indicating whether they are hard or soft.
Rubber and plastic hardness tester
●This is a durometer (rubber and plastic hardness tester) that quantifies and expresses the hardness level of soft materials such as rubber, indicating whether they are hard or soft. ●Compliant with JIS K 6253 ●This durometer is compliant with JIS K 6253 (new JIS). It consists of three types: Type A for medium hardness, Type D for high hardness, and Type E for low hardness. The central Type A tends to show values that are 1 to 2 points higher compared to the old JIS A-type hardness tester. Type D is suitable for hard rubber with a measurement value of 90 or higher using Type A, while Type E is suitable for soft rubber with a measurement value of 20 or lower using Type A. Additionally, Type A's MD15S-A719NT is specified in JIS A 1108 "Method for Compression Testing of Concrete" for the unbonded capping test. Furthermore, Type E is referred to as Type AO durometer in ISO 7619.
Rubber and plastic hardness tester
It is a durometer (rubber and plastic hardness tester) that quantifies and represents the degree of hardness of soft materials such as rubber, indicating whether they are hard or soft.
Rubber and plastic hardness tester
It is a durometer (rubber and plastic hardness tester) that quantifies and expresses the degree of hardness of soft materials like rubber, indicating whether they are hard or soft.
Analog durometer for soft rubber (bench-type)
Although not specified in the standards, the hardness of materials such as soft rubber and foam sponge can be measured using the manufacturer's unique standards.
Analog hardness tester for thin sheets (static needle type)
Simple microhardness tester for thin sheet hardness.
Handheld digital hardness tester
●Equipped with USB as a communication interface ●Automatically determines the direction of impact tests ●Records 270 average values in 9 groups of files
This is a portable hardness tester used for testing the hardness of metals. It features an automatic angle correction function that allows measurements to be taken in any direction, 360°.
- It is suitable for general metal hardness testing, with a wide measurement range and particularly excels in testing the hardness of large workpieces. - It can convert units across seven hardness scales: HRC, HV, HL, HRB, HS, HB, and δB. - You can set the number of measurements between 2 and 8, and it can automatically calculate the average value. - By connecting a USB cable, you can easily edit the recorded measurement files on a computer.
Using unique precision designs related to mechanical and optical aspects, we enhance indentation imaging for clearer and more accurate measurements.
Equipped with a digital micro eyepiece, it is unnecessary to look up at the specimen stage platform to input the diagonal of the indentation. The touch screen can display the testing method, test force, indentation length, dwell time, number of measurements, and conversion scale. When measuring the indentation length, pressing the eyepiece button automatically calculates the hardness value and displays it on the screen. Test results can be checked or printed out using the built-in printer, or saved by connecting to a computer via the RS232 interface. When measuring Knoop hardness, you can select a Knoop indenter, and you can also choose an LCD screen measuring device and a CCD image automatic measurement system.
It features a new high-resolution color touchscreen with a high-brightness display, making it very easy to operate.
This instrument is a high-tech product that integrates electromechanics with high reliability, operability, and intuitiveness. It does not use weights and can automatically load or unload test forces, measuring all Rockwell hardness and surface Rockwell scale hardness. 1. Selection function for all scales of Rockwell hardness and surface Rockwell hardness 2. Conversion function for various hardness scales 3. Arc correction function 4. Display and operation via a touch screen, showing the work process with dynamic images and real-time display of the operation status of the ball screw and indenter 5. The test table automatically rises or descends quickly with operation 6. One-button operation for workpiece setup: completing the loading, holding, and unloading of the test force of the indenter, displaying the hardness value, and returning the test bench to its initial position 7. Data saving and deletion, automatic calculation functions for maximum, minimum, and average values. Equipped with printing output function and RS232 interface for connection to a computer.
The digital Brinell hardness tester is a microcontroller-controlled Brinell hardness tester that combines a precision mechanical structure with a closed-loop control system.
This device employs a weightless automated testing force application, using a 0.5% accuracy compression sensor for feedback, and the CPU control system automatically compensates for any lost testing force during the test. The testing force and load holding time can be directly selected on the touch panel, offering high measurement accuracy, good reproducibility, and convenient operation.
It adopts a precise structural design, controls the test load, makes the overall structure compact, and allows the test load to be stable and measured accurately.
The testing process is controlled by the CPU, which manages the automatic switching function between the objective lens and the indenter. The switching position employs mechanical and electronic double matching, resulting in high positional accuracy. This device has 10 levels of test force and 13 types of Brinell test scales for any selection. It is equipped with three sets of ball indenters and two sets of objective lenses, automatically recognizing and switching between the objective lenses and indenters. The dwell time of the test force and the brightness of the light source measuring the indentation can be adjusted. It can display the measured indentation length, hardness value, number of measurements, and more. Conversion values between each hardness scale can be selected. Test results can be checked or printed out using the built-in printer, or saved by connecting to a computer via the RS232 interface.
The digital Brinell hardness tester is a microcontroller-controlled Brinell hardness tester that combines a precision mechanical structure with a closed-loop control system.
The digital Brinell hardness tester is a microcontroller-controlled Brinell hardness tester that combines a precision mechanical structure with a closed-loop control system. This device employs a weightless automated test force application and uses a 0.5‰ precision compression sensor for feedback, while the CPU control system automatically compensates for any lost test force during testing. The device is connected to a digital micro eyepiece without the need to look up at the platform, eliminating the need to input the diagonal of the indentation. It can directly display the hardness value, test force, dwell time, and indentation length. After measuring the indentation length, pressing the eyepiece button will automatically retrieve and display the hardness value on the screen.
●Easy-to-use menu ●Direct conversion of HL, HV, HB, HRC, HRB, HRA, HS, and conversion to tensile strength
●Easy-to-use menu ●Direct conversion of HL, HV, HB, HRC, HRB, HRA, HS, and conversion to tensile strength ●Utilizes 7 types of impact devices with automatic recognition of impact devices ●LCD display with backlight ●Can store up to 350 groups of data ●Upper and lower limits can be set; a buzzer alarm will sound if measurements exceed the limits ●RS232 interface to meet storage and detailed analysis needs ●Charging complete indicator, low battery indicator ●Built-in printer for printing test results
●Roll-specific system design: For roll-specific and non-roll material hardness testing ●Direct conversion of HL, HV, HB, HRC, HRB, HRA, and HS
●Roll-specific system design: For roll-specific and non-roll material hardness testing ●Direct conversion for HL, HV, HB, HRC, HRB, HRA, and HS ●Utilizes 7 types of impact devices with automatic recognition of the impact device ●LCD display with backlight ●Can store up to 350 groups of data ●Upper and lower limits can be set; a buzzer alarm will sound if the measurement exceeds the limit ●RS232 interface to meet storage and detailed analysis needs ●Software calibration function ●Printer function allows direct printing of test results ●Complies with jB / T 9378-2001 and Q / HD SDF006-2003 standards
