Flocculant×八千代マイクロサイエンス - メーカー・企業と製品の一覧

Flocculantの製品一覧

1~6 件を表示 / 全 6 件

表示件数

Inorganic coagulant "Oil Flock"

It functions effectively across a wide range from acidic to alkaline, improving water quality in neutral areas!

"Oil Flock" is an inorganic coagulant capable of improving water quality, including suspended solids (SS), COD, and normal hexane. By using a single agent and a single process, the operations and equipment are simplified. There may also be multiple processes involved. The separated sludge is hydrophobized, making it easier to dewater, and sludge that does not re-dissolve is also formed. Additionally, there is a space-saving design (approximately 1m²) and a simple structure that makes the wastewater treatment device "Oil Flock System" easy to handle. 【Features of the Oil Flock System】 ■ Short processing time utilizing Oil Flock ■ Chemical dosing and equipment operation can be selected as manual or automatic ■ Installation and customization according to site conditions are possible *For more details, please refer to the PDF materials or feel free to contact us.

  • Safety and consumables

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

Inorganic coagulant "Mizusumairu"

Considerate of the environment, it can purify just by mixing with wastewater! Achieving simplification of processes and equipment.

"Mizusumairu" is an inorganic coagulant that cleans water by directly adding and stirring the first agent into contaminated water, neutralizing it in the process. It improves water quality from acidic to alkaline ranges towards neutral. It enhances water quality indicators such as SS (suspended solids) and COD. Additionally, the separated sludge improves dewaterability and forms sludge that does not re-dissolve. 【Product Lineup and Recommended Dosage】 ■ pH 5 to less than 10: Standard type, 0.1 to 0.2g per 1L, 100 to 200g per 1m³ ■ pH 10: Alkaline type, 0.3g per 1L, 300g per 1m³ ■ pH 11: Alkaline type, 0.7g per 1L, 700g per 1m³ ■ pH 12: Alkaline type, 1.4g or more per 1L, 1400g or more per 1m³ *For more details, please refer to the PDF document or feel free to contact us.

  • Safety and consumables

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

Solid coagulant for grinding wastewater treatment "Dewatering Tab"

No need to adjust the amount; just soak it to see the effects!

In wastewater treatment involving cerium oxide (ceria) and zirconium oxide (zirconia), there are cases where coagulation treatment using polymeric coagulants does not work well due to differences in the inflow concentration of abrasives. This is often not due to the capability of the polymeric coagulants, but rather due to insufficient neutralization treatment or primary treatment, which is an area that requires countermeasures. The "De-Silt Tablet" is a solid coagulant that can achieve sufficient coagulation effects on its own, but it also serves as an auxiliary agent in cases like the ones mentioned above. 【Features】 ■ Treatment is possible with just one agent ■ No need to adjust the amount added (just soak) ■ Can be used both as an auxiliary agent and as a coagulation treatment agent ■ Can also be used as a sedimentation promoter, making it more effective when longer sedimentation times can be taken *For more details, please feel free to contact us.

  • others

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

Drainage treatment coagulant for cerium oxide (ceria) polishing wastewater.

Remove only the abrasives from the grinding wastewater.

"Oil Flock" is a powdered coagulant that can treat wastewater from cerium oxide polishing. There are times when several tens of liters of difficult-to-treat polishing wastewater accumulate, such as when testing is done sporadically. In such cases, performing coagulation treatment for each batch of polishing wastewater can reduce the burden on treatment facilities and lead to cost savings. Oil Flock is a powdered coagulant that can remove up to 99% of suspended solids (SS), with minimal pH fluctuations before and after treatment, making it very user-friendly.

  • Water Treatment

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

Can colloidal silica wastewater be treated with coagulants?

The wastewater treatment of colloidal silica can be processed with coagulants.

However, whether treatment is possible depends on factors such as particle size, so it cannot be said that any material can be treated. The treatment situation also varies depending on the type of coagulant. Here is a guide on how to confirm whether treatment is possible. 1. Check the original particle size If it is around 80 nm, there is a possibility of treatment. If it becomes finer than that, treatment becomes significantly more difficult. 2. Confirm the coagulation effect First, check the effect as it is. If treatment is possible, that’s fine; if it’s difficult, move on to the next step. 3. Dilution Dilute while the coagulant is added. Check the effect while performing dilution and adding the coagulant. Dilute boldly to about 5 to 10 times and confirm at what dilution there is an effect. The alkalinity of colloidal silica wastewater can interfere with coagulation treatment, so it is also important to start with neutralization treatment in such cases. After neutralization treatment with sulfuric acid bands, coagulation treatment may significantly reduce the amount of coagulant used. First, please check the effect with a free sample or consider our free wastewater treatment test.

  • Water Treatment

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

Black smoke-containing wastewater treatment powder coagulant "Oil Flock"

Significantly reduce disposal costs by processing and consolidating black smoke!

The "Oil Flock" we handle is a powdered coagulant that can treat wastewater containing black smoke. Wastewater containing black smoke can appear pitch black and be difficult to process depending on its concentration, but once it is understood that it can be treated with a coagulant, it is possible to effectively treat it simply by adjusting the amount added. While testing of the treated water is necessary, if the quality of the treated water meets the discharge standards of each municipality, only the coagulated material needs to be disposed of, and the treated water can be discharged. [Features] - Treatment is possible with just one agent - The viscosity of the coagulated material is low and has good dewatering properties - Coagulation and sedimentation can occur in a short time - The coagulated material is of a certain size, making it easy to recover *For more details, please feel free to contact us.

  • Drainage and water removal

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録