Control Panel Product List and Ranking from 44 Manufacturers, Suppliers and Companies

Multi-line electric lock control panel for 24 lines BAN-AS24

It is a two-wire multi-line electric lock control panel.

■Features ● Operates electric locks or electric strikes remotely. Controls electric locks with a two-wire conversion adapter using two wires. ● Unlocks the electric lock (electric strike) with an operation button, and the status of locking/unlocking and door opening/closing can be confirmed with an indicator lamp. ● Can control up to 32 electric locks or electric strikes. BAN-AS4: up to 4, BAN-AS8: up to 8, BAN-AS16: up to 16, BAN-AS24: up to 24, BAN-AS32: up to 32. ● Automatically identifies the type of electric lock being used. ● Control of the electric lock can be set to either automatic locking (A mode) or repeated operation (B mode). ● Up to 5 operation displays can be connected per electric lock (electric strike). ● Electric locks can be controlled via external inputs (voltage-free contacts) such as intercoms, timers, and fire alarm systems. * The two-wire conversion adapter AD211 is included. ● Equipped with a JEM-A terminal for easy connection to HA systems. ● In the event of an abnormality (such as disconnection or forced entry) in the electric lock, an alarm output (voltage-free C contact) can be generated.

Company：セキュリティハウス
Price：Other

Entrance/exit management and personal identification system

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Heater-equipped infrared beam switch control panel DSHC-11

Heater-equipped infrared beam switch control panel capable of operating in ambient temperatures down to -25°C.

■Usable ambient temperature supports down to -25℃ This is a control panel for an infrared beam switch with a heater that can be used as a supplementary light beam to prevent pinching in automatic doors and shutters in cold regions and freezing warehouses. ■Heater-equipped sensor unit The waterproof heater-equipped sensor unit reduces malfunction due to condensation and fog in freezing warehouses, as well as ice formation and snow accumulation in cold regions. ■Power supply voltage supports a wide range The power supply voltage supports a wide range of AC100 to 200V. ■Detection distance The detection distance is up to 10 meters. ■User-friendly design ● By adding the optional sensor unit BS-10NH, it can support dual light beams. ● The wiring code for the emitting side is 15m, and the wiring code for the receiving unit is 10m, allowing the sensor connection code to be cut to fit the installation environment. *The sensor unit is sold separately.

Company：セキュリティハウス
Price：Other

Security Sensor Systems
Security devices

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

High-performance control panel "Safety Ace Series ECKD Type"

Various startup methods such as pump stop and remote start are possible! Continuous operation is maintained even when switched to emergency power.

The "Safety Ace Series ECKD Type" is a control panel specifically designed for fire extinguishing units, incorporating the pump's starting device, priming tank, fire water tank, and supply water tank's full and low water level alarm devices, as well as the motor's overcurrent alarm device. With the standard automatic inspection circuit, automatic inspection can be performed simply by setting the pressure switch and installation piping, which are special accessories. If the inspection results are poor, an alarm will be triggered. Additionally, in the event of a fire during inspection, if an external start signal is received, the system will begin operation as a fire pump, even if it has been performing test discharges. 【Features】 - Various starting methods are possible, including direct start, stop, and remote start of the pump. - Continuous operation is maintained even if switched to emergency power. - Equipped with a buzzer and lamp to issue alarms and external no-voltage signals in case of abnormalities. - Automatic inspection can be conducted simply by setting the pressure switch and installation piping, which are special accessories. - An alarm will be triggered if the inspection results are poor. *For more details, please refer to the PDF document or feel free to contact us.

Company：川本製作所
Price：Other

pump
Water supply facilities
Power distribution and control panels

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Automated control panel (drainage, water supply, treatment)

Operate and stop the pump safely and reliably at the required water level! A 7-point field start panel is also available.

We would like to introduce the automatic control panels for autonomous operation that we handle. We provide automatic control to operate and stop pumps safely and reliably at the required water level. We can design and manufacture various control panels according to your needs. In the PDF materials, you can view specifications for automatic panels, including the 7-point automatic panel specifications. 【Lineup (partial)】 ■ AHB-5.5E 5.5kW ■ AHB-11E 11kW ■ AHB-22E 22kW ■ AHB-37E 37kW ■ AHB-110E 110kW *For more details, please refer to the PDF materials or feel free to contact us.

Company：サンエー工業
Price：Other

Drainage and ventilation equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Unit-type power control panel 'MU6-4'

Happiness Denki Co., Ltd. - High-quality control panels with integrated production from sheet metal processing to assembly and inspection.

The "MU6-4" is a unit-type power control panel that offers excellent functionality, sophisticated design, stable quality, and outstanding reliability. The wiring between the internal equipment units and between the equipment units and the door is all connected using harnessed flat cable connectors. The control circuit employs a low-voltage circuit (DC24V) for electric shock prevention and energy-saving measures, and LED lamps are used for the indicator lights, ensuring flexible adaptation to various equipment, as well as excellent maintainability and safety. 【Features】 ■ Integrated production from sheet metal processing to assembly and inspection ■ Excellent functionality and sophisticated design ■ Stable quality and outstanding reliability ■ Structure that allows for easy addition and modification of equipment *For more details, please refer to the related links or feel free to contact us.

Company：サノヤスホールディングス
Price：Other

Power distribution and control panels

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

General Type Power Control Panel

Happiness Denki Co., Ltd. - High-quality control panels with integrated production from sheet metal processing to assembly and inspection.

The "General Type Power Control Panel" is a product that boasts excellent functionality, a sophisticated design, stable quality, and outstanding reliability, built on long experience and proven results. We have functionally arranged equipment within the panel according to load capacity, ensuring flexible adaptation to various facilities, as well as excellent maintainability and safety. Please feel free to contact us when you need assistance. 【Features】 ■ Excellent functionality ■ Sophisticated design ■ Stable quality and outstanding reliability ■ Functional arrangement of equipment within the panel according to load capacity *For more details, please refer to the related links or feel free to contact us.

Company：サノヤスホールディングス
Price：Other

Power distribution and control panels

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Fire pump certified control panel "VC Star/V Star"

A must-see for those looking for a more compact generator! Achieving smaller capacity generators! Space-saving, low-cost, and environmentally friendly certified control panel for fire pumps.

The "VC Star/V Star" is a fire pump certified control panel that can reduce generator capacity. The "VC Star" is a starter that gradually increases the voltage applied to the motor from zero to full voltage over a range of several seconds to several tens of seconds by controlling the conduction phase of a thyristor inserted between the power supply and the motor. The "V Star" is a starter that can utilize the characteristics of the generator to draw out its capacity, with the generator capacity determined at 50% voltage during initial startup, while the motor's starting torque is determined at 70% voltage. 【Features】 ■ Achieves smaller generator capacity ■ Space-saving, low-cost, and environmentally friendly fire pump certified control panel ■ Capable of reducing generator capacity ■ Obtained fire protection certification ■ Installation replacement of the control panel only is possible *For more details, please refer to the PDF document or feel free to contact us.

Company：電光工業
Price：Other

DC Power Supply

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Fire Pump Certified Control Panel "VC Star/V Star"

It can be easily installed in places where large machinery is difficult to access, such as on mountain tops and in valley bottoms! Achieving a smaller capacity for generators! Environmentally friendly fire pump certified control panel.

The "VC Star/V Star" is a fire pump certified control panel that can reduce generator capacity. The "VC Star" is a starter that continuously increases the voltage applied to the motor from zero to full voltage over a range of several seconds to several tens of seconds by controlling the conduction phase of a thyristor inserted between the power supply and the motor. The "V Star" is a starter that can utilize the characteristics of the generator to draw out its capacity, with the generator capacity determined at 50% voltage during initial startup, while the motor's starting torque is determined at 70% voltage. 【Features】 ■ Achieves smaller generator capacity ■ Space-saving, low-cost, environmentally friendly fire pump certified control panel ■ Capable of reducing generator capacity ■ Obtained fire protection certification ■ Installation replacement of the control panel only is possible *For more details, please refer to the PDF document or feel free to contact us.

Company：電光工業
Price：Other

DC Power Supply

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Significant cost reduction with the renewal of the APT-style three-dimensional automated warehouse!

Successfully achieved a cost reduction of up to 50%! Significant savings on costs related to automated warehouses with APT-style renewal! Usability has also been greatly improved!

◆What is APT-style Renewal◆ Is the estimate submitted to your company appropriate? Is the content accurate? ★Typically, there are not many customers who obtain competing estimates against those from manufacturers. This is because it is stated that "only the manufacturer can control it." ⇒In reality, other companies can also do it. Engineering companies like ours, which have accumulated 26 years of experience from subcontracting manufacturers, possess the technology to analyze and control the underlying logic. Of course, the analysis results will be provided to the customer and made open. ★Additionally, some customers propose a complete new replacement due to reasons such as the "end of production" of core components. ⇒We can offer a minimum proposal instead of a complete replacement. By replacing the "control" inside, the existing equipment can be extended without change. For components that have ceased production, we will provide flexible responses such as alternative parts or replacements of just that part. *For customers updating their controls, we have established a nationwide maintenance system, allowing us to offer a one-stop service.

Company：ＡＰＴ
Price：Other

others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Self-supporting control panel (double doors/with center pillar) FE-WP series

Control panel box with customizable box size, free hole processing, and support for specified professional painting.

This is a freestanding control panel box with a center pillar. ■ Material options to suit installation environment You can specify the material from three types: steel "plate," "electro-galvanized steel plate," and "high corrosion-resistant galvanized steel plate," according to the installation environment. ■ Hole processing included (free of charge) We will perform equipment mounting hole processing on the outer surface of the box (6 sides) within the processing range. ■ Custom size manufacturing (free of charge) You can change the outer dimensions of the box (width, height, depth). (Specifications can be made in 1mm increments based on upper and lower limits. The range may vary by series.) ■ Custom color painting for factory colors, machine colors, etc. (additional charge applies) * For specified colors, please provide a separate color sample (painted on iron material). * We also accept painting based on Japan Paint Industry Number, Munsell Number, and RAL Number. Please feel free to contact us for more details.

Company：エスディエス
Price：Other

Power distribution and control panels

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Up to 10 lines supported 【Control panel for fire extinguishing equipment】

Firefighting law certified products such as halogenated compounds, foams, and powders are also available. There are numerous adoption records in factories, commercial buildings, hospitals, etc.! *Firefighting law certified products (non-combustible gas)

Since its establishment in 1959, we have developed and manufactured functional electrical equipment. We have been engaged in contract manufacturing and OEM production for major electrical and construction machinery manufacturers. We are now manufacturing and selling our original low-cost, compact design "Control Panel for Firefighting Equipment." It is equipped with a built-in battery, allowing a wide range of capacities from 7.2Ah to 24Ah, and it can continue to operate even during power outages. In addition to sales under our own brand, we also flexibly accommodate OEM supply, overseas expansion, and custom specifications for each project (special specifications). 【Features】 ■ Low-cost design ■ Compact design ■ High noise resistance ■ Digital display of release delay time on control panels and operation boxes ■ Continuous operation during power outages due to built-in battery *For more details, please refer to the PDF document or feel free to contact us.

Company：和晃技研
Price：Other

Fire extinguishing equipment
Power generation equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Attention those in the Kansai region: If you have no successor for your control panel manufacturer, this is a must-see!

Resolve your future concerns! Leave the design and construction of various control devices to our company.

At Settsu Kiden Co., Ltd., we provide a comprehensive service from the design and manufacturing of control panels and labor-saving machines and equipment to construction and trial operation. Leveraging our 40 years of expertise in sheet metal processing and electrical work, we address our customers' requests and problem-solving needs. If you are facing difficulties due to the lack of successors for your current control panel manufacturer, please feel free to consult with us. 【Case Study】 <Problem> ■ There is no successor for the control panel manufacturer we are using, and we are worried about the future! <Solution> ■ If you provide us with the outline drawings, we will prepare a quotation. *For more details, please refer to the PDF materials or feel free to contact us.

Company：摂津機電
Price：Other

Power distribution and control panels

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Timely detection of bag damage in the dust collector control panel "CPFE"!

By using a particle sensor, it is possible to timely detect damage to the dust collector's bag and errors in the electric valve! This helps extend the lifespan of the filter media and reduce maintenance costs.

We offer plug-and-play equipment and control units called 'CPFE' for pulse-cleaned woven fabric filters from ITK Envifront, which reduce energy, time, and costs. The CPFE control unit includes a base unit with up to four integrated pressure sensors, which are pre-set before shipment, allowing users to simply connect the pressure hose. There is no need to add pressure sensors to run the patented control algorithm of this product. 【Features】 ■ Plug-and-play – Can be installed while the filter is operating ■ Pre-configured at our factory ■ Integrated converters/sensors, easy installation ■ Can be installed while the filter is operating → low risk ■ Service contracts available, etc. *For more details, please download the PDF or feel free to contact us.

Company：HNSエンジニアリング
Price：Other

Other Software

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Control Panel Product List and Ranking from 44 Manufacturers, Suppliers and Companies

Control Panel Manufacturer, Suppliers and Company Rankings

Control Panel Product ranking