Basics Product List and Ranking from 51 Manufacturers, Suppliers and Companies | IPROS

Steel foundation "Pole Anchor Type 100-V"

Shorter and stronger cross-section.

The "Paul Anchor Type 100-V" is a steel pile foundation with resistance plates designed for performance and workability adapted to urban road environments. Load tests have been conducted to evaluate its performance as a foundation for road accessories. While concrete foundations take more than 10 days to complete, this product can be finished in just 5 hours using a dedicated pile driver. Additionally, it can be installed in a space of about 1 square meter, allowing for construction tailored to the burial conditions. Furthermore, it employs a total system that can accommodate various situations. 【Features】 ■ Base plate that allows for immediate pole installation ■ Resistance plate that suppresses rotation due to wind ■ H-shaped steel with low driving resistance *For more details, please refer to the catalog or feel free to contact us.

Driven Steel Foundation "Pole Anchor Type 0"

Significantly reduces the effort of excavation and leveling! This product is mainly used for fence foundations.

The "Paul Anchor Type 0" is a driven steel foundation that allows for strong support without disturbing the natural soil pressure during installation. The work process is very simple, significantly reducing the effort required for excavation and leveling. Additionally, using anchor gel (rapid-setting mortar) and crushed stone as fixing agents can further shorten the construction time. 【Features】 ■ Lightweight ■ Strong ■ Easy ■ The weight ratio compared to block foundations is up to about 1:20 ■ Strong support is obtained without disturbing the natural soil pressure due to the driven installation *For more details, please refer to the PDF document or feel free to contact us.

Driven Steel Foundation "Pole Anchor Type 10"

No need for a curing period for mortar or concrete! You can achieve great foundational strength with a small excavation volume.

The "Pole Anchor Type 10" is a driven steel foundation that involves sequentially driving three resistance plates, which are assembled above ground, into the ground, and then erecting a column in the center to provide support. Unlike conventional concrete foundations that require excavation larger than the foundation width and then backfilling, this product only requires excavation of the limited space at the center of the foundation. As a result, this product allows for space-saving installation by effectively utilizing the bearing capacity of the original ground. 【Features】 - No need for curing periods for mortar or concrete - All construction work can be completed on-site - Only the limited space at the center of the foundation is excavated - Effectively utilizes the bearing capacity of the original ground - Space-saving installation is possible *For more details, please refer to the PDF materials or feel free to contact us.

Residential Flat Foundation "FlatBase"

Introducing precast concrete that delivers discreet peace of mind for residential foundations, replacing on-site pouring!

"FlatBase" is a residential foundation that allows for quick completion by pouring concrete into the rebar sections and joints of the base slab. Precast concrete components for the foundation, manufactured in a factory, are transported to the site and assembled. Additionally, having received evaluation from the Japan Building Center, it offers the advantage of generally not requiring structural calculations for confirmation applications. 【Features】 ■ Flat excavation floor ■ Precast concrete components for the foundation are transported to the site and assembled ■ Generally does not require structural calculations for confirmation applications ■ Contributes to environmental issues and compliance *For more details, please refer to the PDF materials or feel free to contact us.

Guardrail Foundation "PreGuard II"

A rich lineup that accommodates everything from regular roads to highways! Protective fences that can be installed in a short period.

"PreGuard II" is a precast roadway protective fence foundation that offers a lineup suitable for both general roads and highways. Being a precast product, it allows for a reduction in construction time. Since the guardrail posts are not on the road side, paving work is easy. 【Features】 ■ Compatible with general roads to highways ■ Possible to shorten construction time ■ Easy paving work *For more details, please refer to the PDF materials or feel free to contact us.

Concrete foundation "Tapping Pile Foundation Method"

Ideal for ground-mounted mega solar installations.

This is a foundation method that is more reliable than conventional concrete foundations, using a screw-shaped steel pipe called a tapping pile, which is 1600mm long and 60.5mm in diameter. It is driven into the ground using a small hydraulic excavator, and the ground support columns of the framework are bolted to the upper joint of the tapping pile. 【Features】 ■ Possible to work in rainy weather, no curing required, and no need for soil disposal, allowing for a shortened construction period. ■ Can be installed even on slightly sloped or uneven ground. ■ Fast work speed, eliminating the need for floor excavation. ■ Environmentally friendly foundation that generates no leftover soil and does not use concrete. *For more details, please download the PDF or feel free to contact us.

分電盤基礎

Foundation base and anchor bolt embedded foundation

The highest quality "foundation" that supports expensive precision equipment.

"Panel Foundation" covers a wider range of applications (such as control panels, power receiving panels, communication panels, etc.) than "Distribution Board Foundation." Control panels and power transformation equipment are the heart of a facility. The foundation that supports them requires a high level of reliability that does not allow for uneven settlement or deterioration. ▪ Trust in high-strength concrete: Through strict mix management and steam curing based on JIS standards, we have achieved a dense and robust structure that is difficult to realize with on-site pouring. ▪ Support for various panel sizes and loads: We propose optimal products based on load calculations, from small communication panels to large freestanding panels. ▪ Smart wiring management: The positions for entry and exit sleeves can be freely set. This secures internal wiring space and achieves a foundation with high maintenance accessibility.

Convex foundation block and support foundation.

Fences, solar panels, street use... Leave the "foundations" to us.

We accept consultations at the drawing stage for everything from standard products to custom sizes. As a partner that supports the site from the foundation, please consider us for your needs. Fences, solar panels, streetlights... It is precisely for small-scale yet labor-intensive foundation work that secondary products come into play. In addition to a variety of size options, we can also accommodate specifications for anchor bolt and FEP embedding positions, as well as custom shapes.

Custom solar foundation

Supporting the future of solar energy with high-quality concrete technology.

The success of solar power generation projects requires stable foundation work. However, the challenges vary greatly depending on the site, including ground conditions, slope, snow load, and the shape of the mounting structure. Our company offers the design and production of "custom concrete solar foundations" that perfectly meet the needs of the site, even under special conditions that are difficult to address with standard products. ▪ No on-site pouring required: There is no need for formwork assembly, rebar placement, concrete pouring, or curing time. The mounting structure can be installed on the same day it is set up. ▪ Not affected by weather: There is no risk of delays in pouring due to rain, making project management extremely smooth. We provide peace of mind even under harsh conditions such as large panels or heavy snow regions.

[Concrete Product Case] Kanagawa Prefecture: Foundation Block SUS Burial

We have embedded SUS bolts in the foundation! A manufacturing case in Yokohama City.

Here is a product case of "SUS embedded foundation block" in Kanagawa Prefecture. We embedded SUS bolts into the foundation. The product dimensions are a concrete foundation of 250□×H350 with a chamfer on the top surface, (SUS) M12 bolts x 4, with a protrusion of 20mm and a pitch of 110mm. Please feel free to contact us if you have any inquiries. 【Case Overview】 ■ Product Dimensions - Concrete foundation 250□×H350 with a chamfer on the top surface - (SUS) M12 bolts x 4, protrusion of 20mm, pitch of 110mm ■ Installation Location: Yokohama City, Kanagawa Prefecture ■ Installation Period: February 2021 *For more details, please refer to the related links or feel free to contact us.

[Concrete Product Example] Shizuoka Prefecture: Spiral Foundation Φ800×2000

Anchor bolt positions, FEP pipe specifications, number and positions, etc.! Manufactured to fit the site.

Here is a case study of the "Spiral Foundation Φ800×2000" in Shizuoka Prefecture. While there are standard sizes for spiral foundations, our company accommodates custom orders. We received a repeat order from a customer who had previously placed an order with us. We will manufacture according to the site requirements, including anchor bolt positions, FEP pipe specifications, quantities, and locations. Please feel free to contact us with your requests. 【Product Dimensions】 ■ Spiral Foundation Φ800×2000 - Anchor bolts 4M30 (Φ30) × 800L FB50 × 4.5 8 M30 nuts and 4 flat washers - FEP (50) × 1 line, FEP (30) × 2 lines, VE16 (for grounding) - Top surface with 2-point suspension M24 insert *For more details, please refer to the related links or feel free to contact us.

[Concrete Product Example] Mie Prefecture: Spiral Foundation <Doughnut Shape>

We would like to introduce an example of a donut-shaped spiral foundation that was produced!

Here is a product example of "Spiral Foundation" in Mie Prefecture. The shape and dimensions of the spiral vary greatly on site. This time, we produced it in a donut shape. We create products that fit the specific site. Please feel free to contact us with your requests. 【Case Overview】 ■Product Dimensions: Spiral Foundation Φ600×L2,800 ■Construction Location: Kuwana City, Mie Prefecture ■Construction Period: January 2023 *For more details, please refer to the related links or feel free to contact us.

Base Man: Foundation for Fixed Ground 'HBMF Series'

It is possible to prevent loosening and rust! Introducing an excellent foundation for fixing earthen floors that greatly improves work efficiency!

The "HBMF Series" is a foundation for fixed floors that can be installed on sloped ground. The main body has a through hole that is inserted onto anchor bolts installed in the floor and secured with nuts. When mortar is poured into the through hole that is secured with nuts, it can prevent loosening and rust. It is suitable for high seismic installation in narrow spaces and for vibration mitigation due to passing trains, and we offer a wide range of products. 【Features】 ■ Excellent work efficiency ■ Can be installed on sloped floors ■ Can prevent loosening and rust ■ A wide variety of products available *For more details, please refer to the PDF materials or feel free to contact us.

Intersection Use Free R Continuous Foundation

Shallow soil coverage allows for the installation of short and safe protective fences! Intersection-type flexible continuous foundation.

This product is a foundation block that enables the installation of protective fences and protects pedestrians. By increasing the foundation cross-section (width), safety is ensured over a short extension. The post installation holes are reinforced, ensuring safety with a depth of 250mm. Additionally, the sidewalk area has a point height lowered by 80mm, allowing for the installation of pavement and interlocking, which does not compromise the appearance of the road. 【Features】 ■ Safety ensured over a short extension (5m) ■ Foundation height of 300mm ■ Easy installation ■ Compatible with post installation at 250mm ■ Consideration for aesthetics This product is registered with NETIS (CB-050040-VE). *Discontinued product *For more details, please refer to the PDF materials or feel free to contact us.

[Data] Free R Continuous Foundation

It enables installation in areas where safety was given up due to the inability to build protective fences until now!

This document provides information about the "Flexible R Continuous Foundation" used for vehicle protective barriers. The design and specifications are presented using illustrations. Various applications, including buried and surface installations, are listed, along with the main applicable locations and usage examples. The construction methods are clearly explained with photographs. Achievement photos are also included, so please feel free to read through it. 【Contents】 ■ Product Overview ■ Design and Specifications ■ Applications ■ Product Standards ■ Construction Methods ■ Achievement Photos *For more details, please refer to the PDF document or feel free to contact us.

At the intersection of Zizai R.

Shallow soil coverage allows for the installation of short and safe protective fences! Achieving a shortened construction period.

We would like to introduce our "Flexible R Intersection" continuous foundation that we handle. By increasing the foundation cross-section (width), we ensure safety with a short extension. We reinforce the support column installation hole and ensure safety with a 250mm embedment depth. The easy construction method, which only requires upper and lower combinations and bolt (M27) fastening, achieves a reduction in construction time. 【Features】 ■ Ensures safety with a short extension ■ Allows for the installation of protective fences in areas with shallow buried objects ■ Easy construction method ■ Achieves a reduction in construction time ■ Consideration for aesthetics *For more details, please refer to the PDF materials or feel free to contact us.

General residential precast foundation "Adobase"

Easy installation for shortened construction time! Precast foundations that can be removed from the site in as little as 7 days.

"Adbase" is a precast foundation for residential homes. By installing the vertically rising components manufactured in the factory on-site and pouring the slab portion on-site, we can achieve labor savings and shorten construction periods. Our company has been OEM manufacturing precast foundations for major housing manufacturers for many years, with a cumulative record of several thousand units. "Adbase" is the culmination of that expertise. *We apologize, but we only serve within Yamagata Prefecture. (Please consult us regarding neighboring prefectures.) 【Main Benefits】 ■ High quality as it is manufactured in a JIS certified factory ■ High strength and durability ■ Significant reduction in construction time is possible ■ The top surface is level and smooth ■ Accurate positioning of anchor bolts (also compatible with hold-down anchors) *For more details, please download the PDF or feel free to contact us.

"Sorting System" that prevents mistakes and streamlines operations | Logistics Basics

An explanation of what a sorting system is and what types of sorting systems exist!

In logistics, "sorting work" refers to the process of classifying packages collected at warehouses or logistics centers according to predetermined rules. This work involves categorizing products based on the order quantities for each store in a chain store business, making it a crucial task where mistakes are not allowed. In the past, this work was done entirely by humans manually, using visual inspection while referring to listed documents. However, it has now progressed to being systematized and automated. In this article, we will explain the "sorting system" that efficiently carries out sorting work without errors. *For more detailed information, please refer to the related links. Feel free to contact us for further inquiries.*

What is Efficient Transportation "Milk Run" | Basics of Logistics

I will also explain the points to further improve transportation efficiency!

The milk run, which is gaining attention as an efficient transportation method. In traditional delivery methods, one truck is needed for each supplier, resulting in procurement and transportation costs for each. However, with the milk run, the ordering party arranges the truck to visit each supplier, which can lead to cost reductions. This article will introduce the overview of the milk run and the advantages and disadvantages of its implementation. *For detailed content of the article, please refer to the related links. For more information, feel free to contact us.*

Grid Base M: Foundation for Multi-Stage Installation of Solar Panels for Flat Roofs

Multi-layer installation of solar modules on the rooftop of a flat roof! A solar mounting system that does not damage the waterproof layer and ensures "waterproofing down to the foundation"!

Grid Base M is a solar foundation that can be utilized when installing solar panels on flat roofs. Its feature is a mechanism that integrates with PVC sheet waterproofing material, creating a "waterproof layer up to the foundation." Therefore, there is no concern about "damaging the waterproofing when installing solar panels on flat roofs." Moreover, it enables multi-tier installations for solar panels on flat roofs. Additionally, since it can be constructed using a dry method, project management is smooth. The waterproofing contractor will handle the foundation installation, allowing the electrical work to start from the assembly of the mounting structure, which facilitates smooth project management. *For more details, please refer to the PDF document or feel free to contact us.*

Rooftop solar panel mounting foundation | Waterproof guarantee when installing solar panels!

Does not damage the waterproof layer! Lightweight at approximately 4kg/m2! This is a 'lightweight solar mounting foundation for flat roofs' that accommodates various conditions.

The linked disk ADC is a solar module installation frame that can be utilized when installing solar power generation equipment on flat roofs. Its feature is that it integrates with the PVC sheet waterproofing material "Rivet Roof," creating a system where "the foundation is also a waterproof layer." Therefore, there is no concern about "damaging the waterproofing when installing solar panels on a flat roof." Moreover, unlike the so-called placed foundation type, it is lightweight, weighing only about 4 kg/m² (this value is for the foundation part only). As a result, it enables the installation of solar power systems on various flat roofs that were previously abandoned. It is also fine if there is a slight roof slope. It accommodates various roof substrates. Additionally, since it can be constructed dry, project management is smooth. The waterproofing contractor will handle the foundation installation on the rooftop, making it easy for electrical work to simply involve placing the panels and performing wiring tasks. *For more details, please refer to the PDF materials or feel free to contact us.*

[Case Study] Installation of solar power equipment on S-shaped deck plate roof achieved!

Active in rooftop solar installations! Lightweight and waterproof integrated foundation "Connection Disk ADC." Solar panels can be installed on flat roofs and S-structured deck plate substrates.

The Enebrid series is a fixed system for solar equipment on flat roofs. It is characterized by being lightweight and dry. Additionally, since it is based on waterproofing renovations using a rivet roof waterproofing system, there is no concern about roof waterproofing when installing solar equipment. A new waterproofing warranty of 10 years is obtained simultaneously with the installation of the solar equipment (to carry out waterproofing renovations). The waterproof sheets used are excellent in weather resistance and durability, allowing for peace of mind in maintaining the equipment during the installation period of the solar panels. It is also compatible with roofs that have a deck plate substrate. It is actively used on the roofs of factories, warehouses, and research facilities!

Roof-mounted solar panel installation support base "Connecting Disk ADC" for flat roofs.

Does not damage the waterproof layer! Lightweight at approximately 4kg/m2! This is a 'foundation for solar module installation on flat roofs' that accommodates various conditions.

The linked disk ADC is a solar foundation that can be utilized when installing solar power generation equipment on rooftops. By combining it with the PVC sheet waterproofing system "Rivet Roof," it demonstrates high water tightness, enabling reliable installation of solar equipment. Its feature is a mechanism where the waterproof sheet integrates with it, creating a "waterproof layer down to the foundation." There is no concern about damaging the waterproof layer when installing solar panels on flat roofs. Unlike the placed foundation type, it is lightweight, weighing only about 4 kg/m² (this value is for the foundation part only). This makes it possible to install solar power systems on various flat roofs that were previously abandoned. Since it can be constructed dry, project management is smooth. The rooftop waterproofing contractor handles the foundation installation, making it easy for electrical work to simply involve placing the panels and performing wiring tasks. *For more details, please refer to the PDF or feel free to contact us.*

PV EXPO 2026 Exhibition! Flat Roof Solar Foundation Connection Disk ADC

The linked disk ADC is a lightweight, waterproof integrated solar foundation for flat roofs that addresses the challenge of wanting to install solar panels without damaging the waterproofing.

Our company will be exhibiting at the PV EXPO Solar Power Exhibition 2026, which will be held at Tokyo Big Sight from March 17 (Tuesday) to March 19 (Thursday). The information about the exhibiting companies at the exhibition has been made public, so we would like to inform you. Please access it via the link above, [PV Expo Product Page 'Connected Disk ADC']. You can also download related materials from the above site, so please take a look. [Exhibition] Name: SMART ENERGY WEEK Spring 2026 - Smart Energy WEEK - [22nd PV EXPO Spring [International] Solar Power Exhibition] Date: March 17 (Tuesday) to March 19 (Thursday), 2026, 10:00 AM to 5:00 PM Venue: Tokyo Big Sight *Free admission (pre-registration required) [URL] https://www.wsew.jp/spring/ja-jp/register.html?code=1588910415832008-LTG Exhibition Booth Number: East Hall 4 E08-33

【耐震性貯水槽用プレキャスト基礎】EZエンジェル

高品質な組立式プレキャスト基礎と耐震性貯水槽の現場組立施工方法！ （Easy（イージー）＝簡単／いいじ（金沢弁）＝いいね！）

『EZエンジェル』は、プレキャスト工法による現場組立式 コンクリート基礎です。 （Easy（イージー）＝簡単／いいじ（金沢弁）＝いいね！）の意味が合わさっております。 従来の現場コンクリート打ち施工に比べ現場施工を最小限とすることで、 工期短縮と事故リスクの低減を実現。また人件費や管理費のコスト削減が可能に！ プレキャストならではの高品質と耐久性の確保が可能です。 また、経済性・安全性・メンテナンスに優れる防火水槽・耐震性貯水槽の「アクアエンジェル」もご用意。 【特長】 ■ベース設置から水槽設置まで2日で完了 ■大幅な工期短縮による、落下事故の低減 ■人件費や管理費のコスト削減が可能に ■徹底管理された工場で生産されることにより季節や湿度の影響を受けない ■高品質と耐久性を確保 ※詳しくはPDF資料をご覧いただくか、お気軽にお問い合わせ下さい。

The basics of window surround design: "Glossary of window surround terms"

20 terms related to window surroundings, including general terms and products/types! Aimed at those starting architectural design! What is the difference between blackout and dimming? Confusing terms and more.

The "Glossary of Window Surround Terms" is a reference document that explains 20 terms related to window surroundings, including general terms and products/types. It is aimed at those starting architectural design that includes window surroundings, explaining the differences between light blocking and light adjusting, related items, and general terminology. *Please also use it for training new employees and juniors. 【Contents】 ■ Products and general terms related to window surroundings ■ General terms related to the environment ■ Types of screens and general terms, etc. *For more details, please refer to the PDF document available for download.

Single-use guardrail continuous foundation 'Protect Base'

Applicable to reinforced earth walls and block masonry, etc.! In standard products, it can accommodate curves with an inner radius of 42m and an outer radius of 25m!

The "Protect Base" is a guardrail continuous foundation with an L-shaped structure, allowing for standalone use as well as compatibility with various substructures. By connecting each block with loop reinforcement, integration is ensured. By making the connection part semi-precast with loop reinforcement and cast-in-place concrete, it can accommodate curves with standard products. 【Features】 ■ Integration is ensured by connecting each block with loop reinforcement. ■ The connection part is semi-precast with loop reinforcement and cast-in-place concrete, enabling curve accommodation with standard products. ■ Due to its L-shaped structure, it can be used alone or in conjunction with various substructures. *For more details, please refer to the PDF materials or feel free to contact us.

Bridge crane foundation "OK type rail base"

Easy to install and remove! Quick construction with a beautiful finish for bridge-type crane foundations.

【Features】 ■ Quick installation; no on-site pouring required ■ Easy to install and remove, can be used for temporary setups ■ Vehicles can cross from any direction ■ Uneven settling on the sides is unlikely to occur ■ Standard inserts are embedded, eliminating the need for rail positioning processes

Guardrail Foundation "PreGuard II (PG Foundation)"

Construction is possible with small machinery! A protective fence foundation that improves consideration for pedestrians and the guidance performance for colliding vehicles.

"Pregard II (PG Foundation)" is a precast protective fence foundation designed for flexible vehicles (guardrails, guard pipes, guard cables). It is based on stress calculations and stability calculations that consider automobile collision loads, as a retaining wall with vehicle protective fences installed. Improvements have been made by relocating the positions of the protective fence posts to enhance considerations for pedestrians and the guidance performance of colliding vehicles. 【Features】 - As a precast product, it allows for a shorter construction period compared to cast-in-place protective fence foundations. - The connection structure reduces weight. - It can be constructed using small machinery. - It accommodates a curve radius of up to 15 meters (connection fittings are compatible with both straight and curved fittings). - No need for scaffolding installation on the front face of the retaining wall. *For more details, please refer to the external link page or feel free to contact us.